ZEBRONICS SP110 Smart Wi-Fi Plug User Manual
- June 15, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS SP110 Smart Wi-Fi Plug
Product Information
The ZEB-SP110 Smart Wi-Fi Plug is a versatile and user-friendly device that allows you to control your electrical appliances remotely. With its compact design and easy setup process, this smart plug is a convenient addition to your smart home ecosystem.
Specifications
| Input Voltage | 100-240VAC |
|---|---|
| Frequency | 50/60Hz |
| Output Voltage | 100-240VAC |
| Maximum Output Current | 10A |
| Maximum Power Output | 2500W (Resistive) |
| Socket Type | 3-pin Universal Socket 10A |
| Wireless Standard | Wifi 2.4GHz 802.11b/g/n |
| Transmit Power | 16dBm |
| Operating Temperature | -20~50°C |
| Humidity | 80%RH |
| Product Weight | 70g |
| Product Dimension (D x H) | 5.7 x 5.7 cm |
Product Usage Instructions
Product Overview
The ZEB-SP110 Smart Wi-Fi Plug features the following components:
- On/Off Button: Used to control the power supply to the connected device.
- Power Socket: Where you plug in your electrical appliance.
- Power Indicator: Indicates the status of the smart plug.
Connectivity Instructions
Follow these steps to connect the ZEB-SP110 smart plug to your Wi-Fi network:
- Press and hold the power button for 5 seconds to enter pairing mode.
- The power button LED will start blinking in pairing mode.
- Connect the smart plug to a power source.
- On your phone, navigate to the Wi-Fi settings and connect to your Wi-Fi network.
- Open the ZEB-SP110 app on your phone.
- Tap on “Add Device” in the app.
- Select “Socket (Wi-Fi)” as the device type.
- Choose your 2.4GHz Wi-Fi network from the list and enter the password.
- Make sure the smart plug is plugged into the wall socket and hold the power button until the indicator blinks fast.
- Tap on “Confirm the indicator blinking rapidly” checkbox and click “Next”.
- Wait for a few moments and stay on the same screen until the setup completes successfully.
- Tap on “Done” and you will be presented with the home screen of your smart plug.
- For more settings and customization, tap on the top right pen icon.
App Interface
The ZEB-SP110 app provides an intuitive interface to control and monitor your
smart plug. Use it to turn your connected devices on or off remotely, set
schedules, and customize advanced settings.
FAQ
-
How do I reset the ZEB-SP110 smart plug?
To reset the smart plug, press and hold the power button for 10 seconds until the LED indicator flashes rapidly. This will restore the plug to its factory settings. -
Can I control multiple ZEB-SP110 smart plugs with one app?
Yes, you can control multiple smart plugs using the same app. Simply add each device to the app following the connectivity instructions provided above. -
What is the maximum power output supported by the ZEB-SP110 smart plug?
The ZEB-SP110 smart plug supports a maximum power output of 2500W for resistive loads. -
Can I use the ZEB-SP110 smart plug with a 5GHz Wi-Fi network?
No, the ZEB-SP110 smart plug only supports 2.4GHz Wi-Fi networks. -
Is there a warranty for the ZEB-SP110 smart plug?
Yes, Zebronics offers a warranty for the ZEB-SP110 smart plug. For more information on the warranty policy, please visit https://zebronics.com/pages /warranty-policy. -
Is Zebronics an ISO 9001:2015 certified company?
Yes, Zebronics is an ISO 9001:2015 certified company.
Thank you for purchasing the ZEB-SP110 smart plug. Please read this user manual carefully before operation & save this user manual for future reference.
Specification
- Input Voltage: 100-240VAC
- Frequency: 50/60Hz
- Output Voltage: 100-240VAC
- Maximum Output Current: 10A
- Maximum Power: 2500W (Resistive)
- Output Socket Type: 3-pin Universal Socket 10A
- Wireless Standard: Wifi 2.4GHz 802.11b/g/n
- Transmit Power: 16dBm
- Operating Temperature: -20~50℃
- Humidity: ≤80%RH
- Product Weight: 70g
- Product Dimension (D x H): 5.7 x 5.7 cm
Product Overview
Connectivity Instructions
Control
- Step 1: Tap on Add Device.
- Step 2: Tap on Socket (Wi-Fi).
- Step 3: Choose your 2.4GHz Wi-Fi Network and enter the password.
- Step 4: Make sure the smart plug is plugged into the wall socket and hold the power button until the indicator blinks fast.
- Step 5: Now tap on the “confirm the indicator blinking rapidly” check box and click next
- Step 6: Now wait for a few moments and stay on the same screen until the setup completes successfully.
- Step 7: Tap on done and now you will be presented with the home screen of your smart plug.
- Step 8: More settings and customization can be accessed at the top right pen icon.
App Interface
Warranty
To learn more about the Terms and conditions of the warranty policy, please visit https://zebronics.com/pages/warranty-policy.
ISO 9001:2015 Certified Company
www.zebronics.com.