SEENDA JCH-01 Kids Bluetooth Headphones User Manual
- June 15, 2024
- SeenDa
Table of Contents
SEENDA JCH-01 Kids Bluetooth Headphones
Package Contents
Product Diagram
- Power Button
- LED Indicator
- Microphone
- 3.5mm Audio Input
- Type-C Charging Port
- Volume – / Previous Track
- MFB Button
- Volume + / Next Track
- Light Mode Switch Button
on / Off
-
Power on:
Switch the button to the “ON” direction. Then the LED indicator flashes blue for I second, and the colorful lights are on. -
Shutdown:
Switch the button to the “OFF” direction, and the headphone is turned off. The LED indicator flashes blue for I second and then goes off.
Bluetooth Pairing
- In the power-on state, switch the button to the “ON” direction; the colorful lights are on; Bluetooth enters the pairing state, and the red and blue lights flash alternately.
- Turn on the Bluetooth of the mobile phone. Then find and select the ” JCH-OI” Bluetooth pairing name in the device list for Bluetooth pairing connection.
Operation of Buttons
Short press the light mode switch button, and you can switch multiple light modes at will.
| Volume Up | Short press the “+” button. |
|---|---|
| Volume Down | Short press the”-” button. |
| Next Track | Press and hold the”+” button for 2 seconds. |
| Previous Track | Press and hold the”-” button for 2 seconds. |
| Play/ Pause | Press the MFB button once. |
| Answer/ End A Call | Press the MFB button once. |
| Reject A Call | Keep pressing the MFB button for 2 seconds |
| Voice Assistant | Press the MFB button for 2 seconds |
| Redial Last Number | Press the MFB button twice |
| Light mode switching | Short press to switch 4 kinds of light modes |
voice prompt
| Power On | Power on |
|---|---|
| Power Off | Power off |
| Pairing | Pairing |
| Successful Pairing | Connected |
| Disconnection | Disconnected |
| Low Power | Battery Low |
- 85DB/ 940B limited Mode
- Short Press the “-” and “+”together at the same to switch 85DB/94DB
- Mode. The factory set is 85DB.
How to Charge the Headphone
- Connect the Type-C cable to the Type-C port on the headphone, and a 5V power outlet (power adapter is not included).
- The indicator light will glow red to indicate charging.
- When the headphone is fully charged, the indicator light will change from red to blue.
Specification
| BT Version | 5.0 |
|---|---|
| BT Range | 10m |
| The Sensitivity | 94±3db @l kHz |
| Frequency Response | 20-20kHz |
| Battery | 3.7V, 800mAh |
| Working Time | 45H |
| Charging Input | DC 5V |
| Speaker Type | <p40mm |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>