Redmi 23073RPBFL Electronic Tablet User Guide

: June 15, 2024
: Redmi

Table of Contents

23073RPBFL Electronic Tablet
PRECAUTION
Important information about security
**** Safety precautions
CONNECTION INSTRUCTION:
019, 9th Floor, Building 6, 33 Xi’erqi Middle Road,
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Redmi Pad SE
Quick Start guide

23073RPBFL Electronic Tablet

Redmi 23073RPBFL Electronic Tablet

READ THIS DOCUMENT BEFORE USING THIS PRODUCT
Thank you for choosing the Redmi Pad SE
Hold power button down to turn on the device.
Follow the instructions at the screen to configure the device.
To obtain more info, visit our official website: www.mi.com/global/service/userguide

MIUI
Redmi Pad SE comes with pre-installed MIUI, our Android-based operational system, which provides regular updates, and easy to use functions that follows the suggestions of more than 200 million active users in the whole world. To obtain more information, visit en.miui.com

Waste from Electrical and Electronic Equipment (WEEE)

**** Special safeguards should be taken for this product disposal in a safe manner. This mark indicates that this product cannot be disposed along with household waste in the EU. To avoid risks to the environment or human health produced by an inadequate way for waste disposal as well as to promote sustainable reuse of material resources, recycle responsibly.
To recycle this device in a secure manner, look for a return and recollection system, or the retailer from who you have bought the device.

PRECAUTION

THERE’S A RISK OF EXPLOSION IF YOU REPLACE THE BATTERY BY ONE OF AN INCORRECT KIND.
DISCARD USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

To avoid potential audible injuries, don’t hear music at high volume during prolonged periods.
You can access additional information and security precautions in this link: www.mi.com/en/certification

Important information about security

Before use the device, read all security information presented below:

Utilization of cables, power adaptors, or batteries not authorized may provoke fires, explosions or another risks.
Use only accessories authorized that are compatible with your device.
Range of operating temperature of this device is 0 °C to 40 °C. Use of this device in an environment out of this temperature range may cause damage to the device.
If the device has a built-in battery, don’t try to replace it by yourself to avoid damage to the battery or the device.
Only load this device using the cable and its feed adaptor included or approved. Another adaptor usage may cause fires, electrical discharges and damages in the device and the adaptor.
After completed the charge, disconnect the adaptor from the device and power socket. Don’t charge the device during more than 12 hours.
Battery shall be recycled or discarded separated from household waste.
The incorrect handling of a battery may cause fires or explosions. Discard or recycle the device, the battery and accessories according to local regulations.
Don’t disassemble, strike, smash, nor burn the battery. If the battery seems deformed or corrupted, stop immediately using it.
– Don’t ignite a short circuit in the battery, since it can cause heating, burning or other lesions.
– Don’t put the battery in a too hot environment.
– Overheating may cause explosions.
– Don’t disassemble, strike, nor smash the battery, since this could cause a leakage, overheating or battery explosion.
– Don’t burn the battery, since this could cause a fire or explosion.
– If the battery seems distorted or faulty, stop immediately using it.
User shall not extract, nor alter the battery. Only a manufacturerauthorized service site may proceed the battery extraction or repair.
Keep your device dry.
Don’t try to fix the device by yourself. If any part of the device is not properly working, enter in contact with the Mi client’s support or take your device to an authorized service site.
Connect other devices according to your manual of instructions. Don’t connect incompatible devices with this device.
To AC/DC adaptors, power socket should be installed next to the equipment and with easy access.

**** Safety precautions

Respect all legislation and rules in place restricting the tablet usage to adequate situations and environments.
Don’t use the tablet at refuelling stations, explosive or potentially explosive environments, including areas of fuel charge, the ship deck zones, storage or transfer installations of chemical substances or fuel, or areas in which its air may contain chemical particles or substances as grains, dust or metallic dust. Obey all signalization advising to turn off wireless devices as your tablet or other radio equipment. Turn your tablet or other radio equipment off while you’re in blasting areas or in places where “two-way radios” or “electronic devices” might be turned off to avoid possible accidents.
Don’t use your tablet in the operation room, emergency ward or units of infirmary intensive care. Always comply with all hospital and health centres’ rules and regulations. If you possess a clinical device, consult your doctor and such device’s manufacturer to determine if your tablet may interfere in the device functioning. To avoid potential interferences to a pacemaker, always keep a minimum distance of 15 cm between the tablet and the pacemaker. To avoid interferences in clinical equipments, don’t use your tablet next to hearing devices, cochlear implants, or other similar devices.
Respect all aircraft security regulations and turn your tablet off while on board of an aircraft, when required.
While driving a vehicle, your tablet usage must be in accordance with the traffic rules and regulations related.
To avoid being struck by lightning bolt, don’t use your tablet outdoors during electric storms.
Don’t use your tablet in too much humid places, such as bathrooms. If you do this, it may cause electrical discharges, lesions, fires, and damages in the charger.

Security Declaration
Update the tablet’s operating system using the software update function integrated, or access any of our authorized service sites. Update of the software through other media may injure the device or cause data lost, security issues, and other risks.
EU Regulations
Conformity Declaration with RED
Xiaomi Communications Co., Ltd. declares hereby that this tablet with Bluetooth and wifi 23073RPBFL complies with essential specifications and other regulations related in the Radio Equipment Directive (RED) 2014/53/ UE. The complete text of the EU Conformity Declaration is available in the following link: www.mi.com/en/certification

Radiofrequency exposition information (SAR)
This device complies with the limits of a specific absorption rate (SAR, Specific Absorption Rate) for the general population/non-controlled exposition (SAR of 10 grams localized at the main line, limit: 2,0 W/kg) specified by the Council recommendation 1999/519/EC, the rules of the Commission on Non- Ionizing Radiation Protection and RED (Directive 2014/53/EU).
During SAR test, this device is configured to perform transmissions at its highest power level certified in all frequency ranges tested.
When this device is next to the body, you have to use a belt clip or a case without metallic components. It’s necessary to avoid the use as body accessory since its compliance with the radiofrequency exposition close to the body and metallic components was not tested, nor certified.

Legal Information
This device may operate in all EU Member States.
Respect national and local regulations from where the device is in use.
This device is restricted for use indoors only when functioning in the frequency range of 5250 to 5350MHz in:AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE, EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR: Wi-Fi connectivity (including standard Wi-Fi frequency range, standard Wi-Fi, and other functions according to the ratified in the standard IEEE 802.11 specifications) may vary according to regional availability and compatibility of the local net. This function might be added using OTA, whenever is correspondent.
Guarantee that the power adaptor used complies with the specifications of the Clause 6.4.5 in IEC/EN 62368- 1 and that have been tested and approved in accordance with national or local standards.

Frequency range and power
This tablet offers the following frequency ranges, in EU zones and only on the following maximum radiofrequency ranges:
Bluetooth: 20 dBm
2,4 GHz Wi-Fi range: 20 dBm
5 GHz Wi-Fi: 5150 to 5250 MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to
5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm

FCC Regulations
This tablet complies with Part 15 of the Federal Communications Commission (FCC) rules. Functioning is subject to the following conditions: (1) This device shall not cause harmful interferences and (2) this device must accept all interferences received, included those that might cause a non-expected functioning.
This tablet was tested and noted to comply with the limits stipulated to a digital device Class-B, according to established by Part 15 of FCC rules. These limits were established to provide a reasonable protection against harmful interferences in a residential installation. This equipment may generate, use and irradiate radiofrequency energy. If it were not installed, nor used according to the instructions, may cause a harmful interference on the radio communications. Nevertheless, there is no guarantee that it does not produce interference in an installation in particular. If this equipment causes harmful interferences in the reception of radio or television, which may be determined upon turning the equipment off and on; it is recommended to the user to try excluding the interference through one or some of the following measures:

Redirect or displace the receiving antenna.
Raise the distance of separation between the equipment and receptor.
Connect the equipment to a power socket in a different circuit than of the receptor’s connection.
To obtain assistance consult the supplier or an expert radio or television technician.

Radiofrequency exposition information (SAR)
This device complies with the Government specifications related to exposition to radio waves. This device is designed and manufactured in view of not exceeding emission limits related to radiofrequency energy exposition (RF). Standard exposition to wireless devices employs a measure unit known as specific absorption rate (SAR).
SAR limit established by FCC is 1,6 W/kg. This device use was tested next to the body, and complies with the FCC regulation for radiofrequency exposition when in use with an accessory without metallic component. It’s necessary to avoid its use as body accessory since the compliance with the radiofrequency exposition of the accessories close to the body and metallic components was not tested, nor certified.

FCC Note
Alterations or modifications not expressly approved executed by the part responsible for the normative compliance may annul the user authority to operate the equipment.
Shielded cables might be utilized with this unit to guarantee the compliance with B-Class FCC thresholds.
Electronic tag
This device has an electronic tag with the certificate information.
To check it, access Configuration > About this tablet > Certification or open Configuration and write “Certification” at the search bar.
Certification Information (highest SAR)
SAR Limit 10 g: 2,0 W/kg
SAR: Body: 0,367 W/kg (distance 0 mm).
SAR Limit 1 g: 1,6 W/Kg
Portable next to body: 0,94 W/Kg (distance 0 mm).
Model: 23073RPBFL
2307 indicates that this product launch will be after 202307.

NOM
THIS DEVICE OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS:
a) This equipment or device might not cause harmful interference.
b) This equipment or device might accept any kind of interference, including one that may cause a non-expected operation.

CONNECTION INSTRUCTION:

To connect your mobile tablet to the electric energy feed and recharge the internal battery, utilize only your battery charger provided with the equipment.
Connect the USB cable in the tablet’s USB port.
Connect the USB cable in the battery charger’s USB port.
Connect the charger in the AC power socket (100- 240 V~).
To disconnect the charger after having charged the battery, take and remove the charger firmly from AC power socket, do not remove it by the cable.

Using FM Radio
To use the FM Radio, go to Start > Tools > FM Radio. Headphones must be connected as they function as the antenna.
Power: 5 V ⎓ 2 A 10.0W Adapter:
Input: 100 -240 VAC, 50 / 60 Hz, 0.35 A
Output: 5 V ⎓ 2 A 10.0W

Legal Notice
This Quick Start Guide is published by Xiaomi or its local affiliated company.
If necessary, Xiaomi may realize updates or alteration related to typographic errors or actual information unclear in this guide, or improve programs or equipments, without any prior advice and at any moment. However, such alterations will be integrated in the new on-line versions of this quick start guide (review more detail on www.mi.com/global/service/userguide). All images are only for reference and may not depict the actual device with total precision.

Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer’s postal address: