TRUCKRUN CC01-X Intelligent Color LCD Meter User Manual

TRUCKRUN CC01-X Intelligent Color LCD Meter

Product Information

Specifications:

• Product Name: Electric Bike Intelligent LCD Instrument
• Model: CC01-X
• Power Supply: 24V/36V/48V
• Meter Rated Working Current: 10mA
• Maximum Working Current: 200mA
• Shutdown Leakage Current: [value not provided]

Product Usage Instructions

Installation:

To install the CC01-X Intelligent Color LCD Meter, follow these steps:

1. Ensure that the electric bike is turned off and disconnected from any power source.
2. Locate the appropriate mounting position for the LCD meter on your electric bike’s handlebar.
3. Securely attach the LCD meter using the provided mounting bracket and screws.
4. Connect the cables from the LCD meter to the corresponding connectors on your electric bike’s wiring harness.
5. Double-check all connections for proper alignment and secureness.

Power Supply:

The CC01-X Intelligent Color LCD Meter requires a power supply of either 24V, 36V, or 48V. Ensure that your electric bike’s battery voltage matches the meter’s power supply requirement.

Basic Operation:

The CC01-X Intelligent Color LCD Meter provides various functions and displays. Here are some basic operations:

• Press the power button to turn on/off the meter.
• Use the arrow buttons to navigate through different screens and menu options.
• Press the select button to confirm selections or enter sub-menus.
• Adjust settings, such as speed limit or assistance level, using the corresponding buttons or menus.

Maintenance:

To ensure optimal performance and longevity of the CC01-X Intelligent Color LCD Meter, follow these maintenance guidelines:

• Keep the LCD screen clean by wiping it gently with a soft, lint-free cloth.
• Avoid exposing the meter to extreme temperatures or excessive moisture.
• Regularly inspect all cables and connectors for any signs of damage or looseness. Replace or repair as necessary.

Frequently Asked Questions (FAQ)

Q1: Can I install the CC01-X Intelligent Color LCD Meter on any electric bike?

A1: The CC01-X Intelligent Color LCD Meter is compatible with most electric bikes. However, it is recommended to check the compatibility with your specific electric bike model before installation.

Q2: How do I reset the CC01-X Intelligent Color LCD Meter to its default settings?

A2: To reset the meter to its default settings, navigate to the “Settings” menu and look for the “Reset” or “Factory Reset” option. Confirm the selection to initiate the reset process.

Q3: Can I use the CC01-X Intelligent Color LCD Meter in rainy conditions?

A3: While the CC01-X Intelligent Color LCD Meter is designed to be weather- resistant, it is not recommended to expose it to heavy rain or submerge it in water. It is best to protect the meter from excessive moisture to ensure its longevity.

Gold quality + perfect experience Thank you for using Truck Run products

Product name and model description

Name： Electric bike intelligent LCD instrument
Model： CC01-X

• 24/36V/48V Power supply
• Meter rated working current：10mA
• Maximum working current：200mA
• Shutdown leakage current：<1uA
• Operating temperature：-20～60℃
• Storage temperature：-30～70℃

Appearance and Dimensions

Display Appearance and Dimensions（Unit：mm）

Wuxi Truckrun-e Motor CO.,Ltd

Functional Overview

CC01-X type provides a variety of functions to meet your riding needs,which including：

• Intelligent battery display
• Motor power indication
• Boost gear adjustment and indication
• Speed display（Including Real-time speed, maximum speed, average speed）
• Mileage display（Including Single mileage and total mileage）
• Powerful push control and display
• Ride time display
• Backlight Control and Display
• Error code display
• Cadence display（Optional）
• USB connection instructions（Optional）
• Remaining mileage display（Optional）
• Multiple parameter settings（Such as：Wheel diameter, speed limit, battery power setting, power-on password setting etc.）
• Default parameter restore function

Normal operation

Turn On/Turn off

Press the power button to turn on the e-bike system and provide power to the controller. Press and hold the power button for 2 seconds, the e-bike system will be turned off. Electric self-propelled systems no longer use battery power.
When the electric bicycle system is turned off, the leakage current is less than 1uA.

• If the electric vehicle is not used for more than 10 minutes, the meter will automatically shut down.
  5.UI

• After the meter is turned on, the meter displays real-time speed and total mileage (km) by default.Short press the “i” button to display the information in Switch between real-time speed (km/h), average speed (km/h), maximum speed (km/h), single mileage (km), and total mileage (km).

Push forward

Press and hold the “—” button, and after 2 seconds, the electric vehicle will enter the state of electric boosting. The move bike is traveling at a constant speed of 6 kilometers per hour.
Simultaneous screen display “ ” Release the “—” button, the electric vehicle will immediately stop the power output and return to the state before boosting.

Push forward function can only be used when the user pushes the electric vehicle, do not use it while riding.

Headlight control
Short press the ”button，Turn on the headlights, and the backlight brightness automatically decreases.Use the same way short press“ ”button，can turn off the light.

Push forward the Gear selection

Short press the “+” or “-” button to switch the assist gear of the electric bicycle and change the output power of the motor. The default output power range of the meter is 0-5 gears. highest power. After reaching the 5th gear, short press the “+” button again, the interface still displays 5, and 5 flashes to indicate that the current is the highest gear. After the power- assisted downshift reaches the 0th gear, short press the “-” button again, the interface still displays 0, and 0 flashes to indicate that the current is the lowest gear, and the default gear of the instrument is 1st gear.

Power display

Five-segment display of battery power, when the battery voltage is high, the five-segment LCD lights up.When the percentage is 0,the battery needs to be Charged immediately.

Motor power indication
The output power of the motor can be known through the meter. The display method is shown in the figure below.

USB connection instructions(Optional)
When the monitor is plugged into a USB external device, the meter will display the interface as shown below.

Error code display
When the electric control system of the electric vehicle fails, the instrument will automatically display the error code. For the definition of the detailed error code, please refer to Appendix 1.

When the error code is displayed, please remove the fault in time. After the fault occurs, the electric vehicle will not be able to drive normally.

General parameter settings

Press and hold the power button to turn it on. In the power-on state, when the vehicle is stationary, press and hold the “+” and “-” buttons at the same time for more than 2 seconds, the instrument will enter the normal setting state.

All settings are operated with the bike parked。

Wheel diameter setting：Wheel Indicates the wheel diameter setting.Press the “+” or “-” button to increase or decrease until the desired value is displayed.Default is 26 inches.Press“i”button Confirm and save changed settings.

Speed limit setting
Speed Limit Represents speed limit settings。Represents speed limit settings.

Represents speed limit settings.The speed limit range is 15-40 km/h, the default is 25 km/h.
Press the +/- keys to increment and decrement the value to change the setting. Press the “i” key to save the modified settings.

Backlight brightness setting
Brightness Represents backlight brightness，Level 5 represents the brightest, and the lower the level, the lower the brightness. The backlight brightness parameter can be changed by the “+” or “-” button, and the changed setting can be confirmed and saved by pressing the “i” button.

Voltage setting
Voltage Represents the battery level bar setting. The rated voltage of 36V and 48V can be switched.
The five-segment voltage value of 36V or 48V can be input one by one. For example, the default value for the first stage voltage value (VOL 1) of 48V is 41.5V.
Short press the “+” or “-” key to change the value, and short press the “i” key to confirm and enter the next level of power setting. After the five-stage voltage value is completely input and set, press the “i” key to confirm and save the modified settings.

Assist gear setting
Assist levels Represents boost gear mode.There are 8 modes to choose from: 0-3, 1-3, 0-5,1-5, 0-7, 1-7, 0-9, 1-9.
Change the assist gear mode by pressing the +/- keys, and press the “i” key to select and confirm the desired mode.

Voltage display settings
SOC V Two display methods representing the remaining battery capacity.One is the percentage and the other is the voltage value. Press the “+” button or “-” button to select the desired display method. To store the changed settings, press the “i” button briefly to confirm.

Automatic shutdown time setting
Dormancy, Represents the automatic shutdown time setting.Represents the automatic shutdown time setting.
This feature can also be turned off, and the default shutdown time is 5 minutes.
Short press the “+” or “-” key to change the value, and short press the “i” key to confirm and enter the next level of power setting. After the five-stage voltage value is completely input and set, press the “i” key to confirm and save the modified settings.

Imperial and metric unit conversion

Unit, Represents the unit switching setting. To convert units, press the “+” button or “-” button to select the desired setting item, and then press the “I” button to confirm. The default is Metric (Kilometers).

Unit switching

Password Set
Password Set Indicates the password setting of the instrument, short press the “i” key to enter the password setting state, the screen prompts “Password Set”, indicating the power-on password. Short press the “i” key to shift, and press the “+” or “-” key to add/subtract the value. After entering the 4-digit password, short press the “i” key to confirm. If the password is correct, enter the power-on password enable setting. interface, otherwise it stays in the password input state. The default power-on password is 1212.

1. Power-On Password Disable/Enable To enable or disable the startup password setting, press the “+” or “-” button to select On or Off. On means power-on password is enabled, off means power-on password is disabled. The default is off. To enable a power-on password, select “On”, then press the “i” button to confirm and enter the current password or the default password “1212”. Press the “+” or “-” button to change the number, then press the “i” button to confirm the numbers one by one until the correct password (current password or default password ‘1212’) is entered. To disable the current password, select “Off”, then press the “i” button to confirm and enter the current password
   correctly. The screen displays “Password cancelled successfully”. The password recovery default code “1212” is then displayed.
   Open the password setting interface

2. Power-on password reset From the last interface above, press the “+” or “-” button to select “Reset Password”, and press the “i” button to confirm and enter the power-on password reset interface. There are 3 pages to set a new password: On the first page, please enter the current password or the default password “1212” correctly. Then move to the second page to enter the new password. Press the “+” or “-” button to increase or decrease the number, then press the “i” button to confirm the numbers one by one until a new 4-digit password is completed. Finally, go to the third page and enter the new password again to confirm. The screen shows “Password reset successfully” The next time you turn on the e-bike system, please enter a new password to power on.

Restore factory Set

Factory Represents factory settings. To restore factory settings, press the “+” or “-” button to select Yes or No. The default is No To save the changed settings, press the “i” button to confirm.

Instrument basic parameter setting

Display Represents setting general parameters of the instrument, such as clearing a single mileage, etc.

TRIP Reset Clearing represents a single mileage clearing setting.
To clear the travel distance, press the “+” button or “-” button to select “YES” or “NO”. YES means clear single trip distance. NO means not to clear a single mileage. Press the “I” key to save the changed settings, the default is NO.

Exit Set

Reset to defaults Represents factory settings. To restore factory settings, press the “+” or “-” button to select Yes or No. The default is No To save the changed settings, press the “i” button to confirm.

If no operation is performed within one minute, the instrument will automatically exit the setting state.

Quality Commitment and Warranty Coverage

Warranty Information

1. All faults caused by the quality of the product itself under normal use conditions will be covered within the warranty period.
   The company will be responsible for the limited warranty.

2. The warranty period of the product is within 24 months since the instrument leaves the factory.
   The following situations are not covered by the warranty

3. The casing is opened.

4. leads are scratched or broken.

5. After the instrument leaves the factory, the casing is scratched or the casing is damaged

6. Caused by force majeure (such as fire, earthquake, etc.) or natural disasters (such as lightning strikes, etc.) malfunction or damage.

7. The product is out of warranty

8. Lead Connection Diagram

Table 1：Standard connector line sequence table

Standard wire

color

|

Function

---|---
Black（GND）| Display ground wire
Brown（P+Y）| Power control line of the

White（TX）

| The data receiving line of the instrument
---|---

Green（RX）

| The data transmission line

of the instrument

Orange（VCC）| Instrument power cord

Attachment 1：Error code definition

Numb er| Code| Meaning| Nu mbe

r

| Cod e| Meaning
---|---|---|---|---|---
1| 04| The handle is not returned| 7| 10| High temperature has reached the

protection point

2| 05| Handlebar failure| 8| 11| Temperature sensor

failure

3| 06| low voltage

protection

| 9| 12| Current sensor

failure

4| 07| Over voltage

protection

| 10| 21| Speed sensor failure
5| 08| Motor Hall signal line fault| 11| 30| Instrument communication

failure

6| 09| Motor phase line

fault

| 12| |

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>