eMLID RS3 GNSS Receiver User Guide
- June 15, 2024
- Emlid
Table of Contents
eMLID RS3 GNSS Receiver
Product Information
Specifications
- Model: [Product Model]
- Dimensions: [Product Dimensions]
- Weight: [Product Weight]
- Power Source: [Product Power Source]
- Connectivity: [Product Connectivity Options]
- Supported Formats: [Supported Log Formats]
Product Usage Instructions
Configure Logging Settings
To record and download logs, you first need to configure the logging settings on the product. Follow these steps:
- Power on the product and navigate to the settings menu.
- Select “Logging” or a similar option to access the logging settings.
- Choose the desired log format and set the log recording duration.
- If applicable, specify any additional logging preferences such as log level or filters.
- Save the changes and exit the settings menu.
Record Logs
Once you have configured the logging settings, you can proceed to record logs using the following steps:
- Perform the desired actions or generate the events that you want to log.
- Ensure that the product is powered on and operational.
- The product will automatically start recording logs based on the configured settings.
- Continue using the product as needed while it captures the logs in the background.
Download Logs
After recording logs, you can download them using the following instructions:
- Connect the product to a computer or a compatible device using the provided connectivity options.
- Access the product’s file management system or log management interface on the connected device.
- Navigate to the log folder or directory where the recorded logs are stored.
- Select the logs you want to download and choose the download option.
- Wait for the download to complete, and then save the logs to a desired location on your device.
Frequently Asked Questions (FAQ)
Q: How long can the product record logs?
A: The recording duration of logs depends on the configured settings and
available storage capacity. Please refer to the product manual or settings
menu for more information.
Q: Can I change the log format after recording?
A: No, the log format cannot be changed after recording. You need to
configure the desired log format before starting the logging process.
Q: Are the recorded logs timestamped?
A: Yes, the recorded logs are usually timestamped with the date and time
of each event or action.
Configure Logging settings
- Go to the Logging screen.
- Tap Settings in the Raw data section.
- Choose the RINEX format.
- Select the raw data settings manually.
Record logs
- To enable logs recording, tap Start recording.
- To stop logs recording, tap End recording.
Download logs
- Scroll down to the Logs section.
- Tap the Download logs button.
- Save your logs depending on the device you use.
