AeroCool 6569 Delta RGB Tempered Glass Instruction Manual
- June 15, 2024
- AeroCool
Table of Contents
AeroCool 6569 Delta RGB Tempered Glass
Save Money. Build Better.
Front I/O Cable Connection
Front I/O Connectors
(Please refer to the motherboard’s manual for further instructions).
Note: Specifications may vary depending on your region. Contact your local retailer for more information.
Accessory Bag Contents
-
SSD Screw
MB Screw -
PSU Screw
PCI Screw -
HDD Screw
-
MB Standoff
-
HDD Screw
-
SSD Silicon
-
Cable Tie
-
Controller board
How to Install
-
Install Motherboard
-
Install PSU
-
Install Add-on Card
-
Install 3.5″ HOD x 1
-
a) Install 2.5″ SSD x2
(5b) Install 2.5″ SSD x7
-
Install Front Fans
-
Install Top Fans
-
Install Side Fans
-
Install Rear Fan
-
Install PSU Fan
-
Install Front Radiator
-
Install Top Radiator
-
Install Side Radiator
-
Install Rear Radiator
I/O Panel
Hold LED control button for 3 sec to switch between motherboard and button control Hold LED control button for 6 secs to turn off LED and press once to turn it back on.
Note:
Specifications may vary depending on your region Contact your local retailer
for more information.
To learn more about how to connect your ARGB, please visit the product page at aerocool.io
For FRGB Version
| |
---|---|---
1| 100%| 100%
2| 80%| 80%
3| 0%| 80%
For ARGB Version (RGB Fan Hub)
Connection Set Up User Guide
For ASUS Aura Sync, MSI Mystic Light Sync, and GIGABYTE
RGB Fusion Motherboards
- Connect (Al to motherboard’s PWM socket
- Connect (Bl to motherboard’s Addressable RGB socket
For Non-Addressable RGB Motherboards
Connect (Al to motherboard’s PWM socket
Connect the 2-Pin reset switch connector (Dl with your hub. Connect (C) to
PSU’s SATA connector.
Use the RGB fan connectors (El to connect the Addressable RGB fans with your
hub.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>