OLIGHT PATROLLA Powerful Flashlight User Manual

USER MANUAL

 PATROLLA Powerful Flashlight

PATROLLA

A slim, rechargeable, and versatile flashlight with a long-lasting battery.

IN THE BOX

Table 1: Specifications

* Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.

Table 2:
Charging Specifications

Charging kits| Customized Charging Dock &
USB-C Charging Cable
---|---
Cable length| 0.8m
Input| USB A DC 5V 2A
Output| CC&CV  4.2V±0.05V 2A
Time to fully charge| About 6.5 hours

MCC (Optional Accessory)

Figure 1
Remove the insulating film before use Figure 2
Charge the battery

During charging, only the Medium mode is available. While charging with the dock, the tail switch will be inactive, and only the side switch can be used.

SIDE SWITCH OPERATION:

Figure 3
ON/OFF Figure 4
Lock/Unlock Figure 5
Moonlight Figure 6
Turbo Figure 7
Strobe Figure 8
Change Brightness Level

TAIL SWITCH OPERATION:

Figure 9
Lightly press for Low output Figure 10
Partial press and hold for Momentary-on (Low) Figure 11
Firm press for High output Figure 12
Firm press and hold for Momentary-on (High) Figure 13
Switch from Low output to High

Battery Indicator

Figure 14-1
Normal mode Figure 14-2
Moonlight mode Figure 15
How to use the fixing bracket

Use tools to punch holes in the wall or wooden board|
---|---
Insert the expansion screws|
Remove the 3M adhesive sticker on the back of the fixing bracket and align it with the hole on the wall （Note: Please stick the 3M adhesive sticker on a flat and smooth wall or car panel ）|
Secure the bracket in place by screwing in the screws|
Charging Dock|

Figure 16
Alternative charging method    ****

1. If you have an MCC 3 charging cable and your charging dock is not available, you can use the MCC 3 charging cable for charging.
2. The MCC 3 is not included in the package. If necessary, please purchase it from Olight Store.

How to operate:

1. Product specifications, see Table 1 and Table 2;

2. Operating instructions are as follows:
   2.1 Remove the insulating film before use, see Figure 1;
   2.2 Charging, see Figure 2;
   During charging, only the Medium mode will be available. When using the charging dock to charge, the tail switch will not function, and only the side switch can be used.

3. Side switch operating instructions are as follows:
   3.1 Power On/Off, see Figure 3.
   Quickly press the button to turn the flashlight on/off.
   3.2 Lockout/Unlock, see Figure 4.
   In the off state, press and hold the button for approximately 2 seconds until the Moonlight mode turns off, indicating the flashlight is now locked. When the flashlight is locked, pressing the side switch will briefly activate the indicator. To unlock, press and hold the side switch for approximately 1 second until the flashlight turns on in Moonlight mode.
   3.3 Moonlight mode, see Figure 5;
   In the off state, press and hold the button for at least 1 second to activate Moonlight mode. If the previous state before turning off was Moonlight mode, a single press of the button will reactivate it.
   3.4 Turbo mode, see Figure 6;
   Quickly double-press the button to activate Turbo mode, and double-press again to return to the previously used mode. If the battery level is low, it will return to the next lower mode.
   3.5 Strobe mode, see Figure 7.
   Quickly press the button three times or more to activate Strobe mode, and perform a single or long press to exit Strobe mode.
   3.6 Adjusting brightness, see Figure 8.
   In the power-on state, press and hold the side switch to adjust the brightness. The output will cycle from the current brightness in the order of Moonlight (or Turbo) ->Low ->Medium ->High ->Low. Release the button to select the desired brightness. (Note: Moonlight mode and Turbo mode are not included in the cycle).

4. Tail switch operating instructions are as follows:
   4.1 Lightly press for Low output, see Figure 9;
   Quickly and lightly press the tail switch once to access Low output.
   4.2 Partial press and hold for Momentary-on (Low), see Figure 10;
   Lightly press and hold the tail switch to momentarily turn on Low output.
   4.3 Firm press for High output, see Figure 11;
   Quickly press the tail switch once to access High output.
   4.4 Firm press and hold for Momentary-on (High), see Figure 12;
   Firmly press and hold the tail switch to momentarily turn on High output.
   4.5 Switch from Low output to High, see Figure 13;
   In Low output, firmly press the tail switch quickly once to activate High output, and press again to turn off the flashlight.

5. Battery indicator:
   5.1 Normal mode, see Figure 14-1;
   5.2 Moonlight mode, see Figure 14-2;

6. How to use the fixing bracket, see Figure 15.

7. Alternative charging method, see Figure 16;
   1. If you have an MCC 3 charging cable and your charging dock is not available, you can use the MCC 3 charging cable for charging.
   2. The MCC 3 is not included in the package. If necessary, please purchase it from Olight Store.

WARNING

• Don’t use damaged, deformed batteries, or those with broken envelope.

CAUTION

• Do not look directly at the light source or shine into eyes, or else it may cause temporary blindness or permanent damage to the eyes.
• Do not block the light at close range, or else the energy emitted from the light may cause the object to burn.
• Non-standard batteries，do not take it out for charging.
• Do not charge the light with any other non-specified chargers.
• Don’t leave the light in a car where the inside of temperature may be over 60℃, or in similar places.

NOTICE

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Active thermal management: The built-in thermister monitors the temperature of the light in real time and suppresses overheating by reducing the output.
• Do not use a charging port short-circuited by metal or conductive objects.
• Do not disassemble the product.
• Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.

REMARK

• For long-term storage, please remove the battery.
• Keep the charging port clean and dry.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery warranty: Olight offers a one-year warranty for all rechargeable batteries.
If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal
use conditions, we provide a conditional quality assurance as appropriate.
USA Customer Support : cs@olightstore.com
Global Customer Support : contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan
Town, Dongguan City, Guangdong, China.
Made in China
CAN ICES-005 (B) / NMB-005 (B) 3.4000.0692
A. 11, 15, 2023

Documents / Resources

| OLIGHT PATROLLA Powerful Flashlight [pdf] User Manual
PATROLLA, PATROLLA Powerful Flashlight, Powerful Flashlight, Flashlight
---|---
| OLIGHT Patrolla Powerful Flashlight [pdf] User Manual
Patrolla Powerful Flashlight, Patrolla, Powerful Flashlight, Flashlight

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>