milwaukee IPL-LED Alkaline Pen Torch Instructions
- June 4, 2024
- Milwaukee
Table of Contents
IPL-LED Alkaline Pen Torch
Instructions Manual
IPL-LED Alkaline Pen Torch
Picture section with operating description and functional description
Text section with Technical Data, important Safety and Working Hints, and description of Symbols
TECHNICAL DATA
BATTERY LAMP
IPL-LED
Rated Power input ………………………………………….1 W
Lighting time ………………………………………………….3 h
Luminus flux ……………………………………………….100 lm
Color rendering index (CRI)……………………………….80
Color temperature………………………………………..4000 K
Battery voltage………………………………………3 V (2×1,5V)
Battery type ……………………………………….. LR03 / AAA
Weight according to EPTA-Procedure 01/2014 ……….0,1 kg
Protection class ………………………………………………………… IP 67
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re, and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY LAMP
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don‘t use this tool in wet areas.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
****SAFETY INSTRUCTIONS BATTERY
This tool is designed to be powered by 2 LR03 / AAA batteries properly
inserted into the instrument. Do not attempt to use it with any other voltage
or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or types within brands)
of batteries.
Do not mix rechargeable and non-rechargeable batteries.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with the battery, acid washes it off
immediately with soap and water. In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack, or charger in fluid
or allow a fluid to fl ow inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, bleach or bleach-containing products,
etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The Battery Lamp is intended to be used for light-independent use away from
the mains supply.
Do not use this product in any other way as stated for normal use.
MAINTENANCE
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit No. on the
label and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| **** | CAUTION! WARNING! DANGER! |
|---|---|
| Please read the instructions carefully before starting the machine. | |
| Do not stare at the operating light source. | |
| Class III electrical protection. | |
| Do not dispose of electric tools, batteries/rechargeable batteries together |
with household waste material.
Electric tools and batteries that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling
facility.
Check with your local authority or retailer for recycling advice and
collection point.
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| Eurasian Conformity Mark
Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>