GROWNS N1T Bottle Warmer User Manual

GROWNS N1T Bottle Warmer

Product Information

Specifications

• Power Requirements: For use in the USA
• Power Consumption:
• Product Capacity: Can warm up bottles of up to 200ml capacity

Safety Note
Please take precautions to prevent burns during use, as the product may become hot. Do not touch the Bottle Warmer until it has cooled down.

Product Usage Instructions

Before Use

1. Check all parts to ensure safety and cleanliness.
2. Place the bottle warmer on a flat and level surface.
3. Fill the bottle warmer with the appropriate amount of distilled water to prevent dry burning. The bottle should not be floating after adding water.
4. Before connecting the power supply, ensure that the supply  voltage matches the required voltage for the bottle warmer. If not,a transformer may be needed to adjust the voltage.

Turning On and Off
To turn on the bottle warmer, press the power button. The power light will turn on to indicate that it is functioning properly. Toturn off the bottle warmer, press the power button again and the light will turn off.

Function Selection
To select a function, press the function button. This bottle warmer has 4 functions:

1. Express Warming: This function quickly warms a bottle of milk in 3-7 minutes. The screen displays a timer countdown in minutes. To avoid overheating, remove the bottle immediately after it has reached the desired temperature.
2. 24H Warming: This function heats milk at a slower speed (about an hour) to the set temperature and then keeps it warm for 24 hours. It can also be used to defrost a bottle of milk to a liquid state. The screen displays the set temperature and keeps flashingduring heating. The screen will stay on and stop flashing after heating is completed.
3. Food Warming: This function heats food to the desired set temperature in around 1.5 hours (frozen meat puree takes 3 hours)and keeps it at that temperature for up to 6 hours. The screen displays the set temperature and keeps flashing during heating. The screen will stay on and stop flashing after heating is completed.
4. Sterilize: This function sterilizes feeding bottles and pacifiers by boiling water and steam.

Using the Bottle Warmer

1. Pour 40ml of distilled water into the bottle warmer. It is recommended to use distilled water to prevent scale buildup.
2. Place the milk bottle and basket into the bottle warmer.
3. Press the power button to turn on the device. The power light will illuminate.
4. Press the function button to choose the desired function (Express Warming, 24H Warming, or Food Warming).
5. Refer to the express warming reference table to determine how long the milk needs to be warmed for Express Warming function. Use the + and – buttons to adjust the time as needed. The default heating time is 3 minutes.
6. The bottle warmer will start working automatically 5 seconds after you have finished selecting the function.

FAQ

• Q: What is the maximum bottle capacity that the bottle warmer can handle?
• A: The bottle warmer can warm up bottles of up to 200ml capacity.
• Q: How long does the Express Warming function take?
• A: The Express Warming function can warm a bottle of milk in 3-7 minutes. The exact time may vary depending on the desired temperature and starting temperature of the milk.
• Q: How long does the 24H Warming function keep milk warm?
• A: The 24-hour Warming function keeps milk warm for 24 hours after reaching the set temperature.
• Q: Can the bottle warmer be used to defrost frozen milk?
• A: Yes, the 24-hour Warming function can be used to defrost a bottle of milk to a liquid state.
• Q: How long does the Food Warming function take?
• A: The Food Warming function heats food to the desired set temperature in around 1.5 hours. Frozen meat puree may take up to 3 hours.
• Q: Can I use the bottle warmer to sterilize feeding bottles and pacifiers?
• A: Yes, the Sterilize function can be used to sterilize feeding bottles and pacifiers by boiling water and steam.

HEARTFELT THANK YOU
Thank you so much for purchasing from us and placing your trust in our brand.

GROWNSY : Parent’s best helper.

GROWNSY creates modern and thoughtful baby products for parenthood. Starting from smart feeding essentials, GROWNSY provides a broad portfolio for all scenarios related to parents and babies. We are committed to building a one- stop mat pral aunt that express it the are Crownst in mason solving most difficult problems during manufacturing and offeringthe most convenient items to our user. Grownsy’s products are modern in design, creative in structure, and smart in use.

For any questions or issues, please email us: We will go above and beyond to resolve anycustomer issue within 24 hours. Randell Founder of GROWNSY

Technical Parameters

• Product Name: Bottle Warmer
• Warranty: 12 Months
• Product Model: N1T
• Power Requirements: 120V~ 60Hz (For use in the USA)
• Power Consumption: 210W
• Recommended Temperature: 15~30
• Recommended Humidity: 50~80%°C
• Recommended Environment: For indoor use only
• Product Capacity: Can warm up bottles of up to 200ml capacity

Instruction

Safety Note : Please take precautions to prevent burns during use, as the product may become hot. Do not touch the Bottle Warmer until it has cooled down.

Explanation of Settings

• ON/OFF:
  Press this button to turn on the bottle warmer. The light will turn on to indicate that the bottle warmer is powered on. To turn off the bottle warmer, press the button again and the light will turn off.

• Choose Function:
  Press this button to select a function. This bottle warmer has 4 functions.

Fast warming setting:
(Add 40ml distilled water) This function quickly warms a bottle of milk in 3-7 minutes. The screen displays a timer countdown in minutes. To avoid overheating, remove the bottle immediately after it has reached the desired temperature.

Constant milk warming:
(Add distilled water to the MAX line mark) This function heats milk at a slower speed (about an hour) to the set temperature and then keeps it warm for 24 hours. It can alsobe used to defrost a bottle of milk to a liquid state. The screen displays the set temperature and keeps flashingduring heating. The screen will stay on and stop flashing after heating is completed.

Food heating:
(Add distilled water to the MAX line mark) This function heats food to the desired set temperature in around 1.5 hours (frozen meat puree takes 3 hours) and keeps it at that temperature for up to 6 hours. The screen displays the set temperature and keeps flashing during heating. The screen will stay on and stop flashing after heating is completed.

Sterilize:
(Add 100-150ml distilled water) This function sterilizes feeding bottles and pacifiers by boiling water and steam.

Warning

• Before using the bottle warmer, please check all parts to ensure safety and cleanliness.
• Place the bottle warmer on a flat and level surface.
• Make sure to fill the bottle warmer with the appropriate amount of distilled water to prevent dry burning. The bottle should not be floating after adding water.
• After plugging in the power, the bottle warmer will emit a “beep” sound to indicate that it is connected to power.
• Press the power button to turn on the bottle warmer. The power light will turn on to indicate that it is functioning properly.
• Before connecting the power supply, ensure that the supply voltage matches the required voltage for the bottle warmer. If not, a transformer may be needed to adjust the voltage.

The illustration below is specifically for the “Fast”, “24H”, and “Food” functions only. For information on how to use the “Sterilize” function, please refer to the detailed explanation below:

This bottle warmer has a smart memory function that remembers the last warming setting used for the next use.

Fast Warming/Defrosting

1. Pour 40ml of distilled water into the bottle warmer. (It is recommended to use distilled water to prevent scale buildup.)
2. Place the milk bottle and basket into the bottle warmer.
3. Press the power button to turn on the device. The power light will illuminate. Then, press the “ ” button to choose the “Fast” function. Check the express warming reference table to determine how long the milk needs to be warmed, and use the “ + ” and “ – ”buttons to adjust the time as needed. The default heating time is 3 minutes. The bottle warmer will start working automatically 5 seconds after you have finished selecting the function.
4. The bottle warmer will count down automatically, and the remaining heating time will be displayed on the screen. The device will beep to remind you when the milk is ready. Be sure to remove the bottle promptly to avoid over-heating.
5. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.

*Note:

1. The speed of warming milk depends on the amount of the milk warmed and on its initial temperature, i.e. room temperature (20°C) or fridge temperature (4°C).
2. If you find the milk is not warm enough, you can place the bottle back into the Bottle Warmer for an additional maximum of 0.5-1 minute ofwarming. This will create a slightly warmer result but without overheating.
3. If you leave the bottle in the bottle warmer longer than the time indicated in the settings table, the milk may become overheated.
   • Note : Overheating breast milk can cause valuable nutrients and vitamins to be lost.
4. Always check the temperature of the milk before feeding your baby. shake the bottle or milk storage container and check the temperature of the milk by sprinkling a few drops on the inside of your wrist.
   • Caution: The water in the bottle warmer may be hot after warming milk or baby food. Be careful as hot water can cause serious burns.

Fast Warming/Defrosting Function

1. The time listed on the reference chart is a recommendation ONLY and may not provide an accurate time due to different initial temp/bottle material/ambient temp etc that may impact the final milk temp.
2. Take out the bottle in time to avoid overheating. If you find the milk is not warm enough, please place the bottle back into the appliance for a maximum of 0.5-1 minute of extra warming.

Reference Chart Only For Fast Warming Function

Constant Warming Milk at 37°C/98.6 F

1. Fill the chamber with distilled water up to the MAX line indicated on the bottle warmer. Then, place the baby bottle and basket into the bottle warmer.
2. Press the ” ” button to choose the “24H” function. The default temperature is 37C/98.6F, and you can adjust the temperature you need by touching the “+” or”-” button. The bottle warmer will startworking automatically in 5 seconds after you finish selecting the function.
3. During heating, the screen will display the set temperature flashing in degree centigrade. The milk will be ready in about an hour, and the set tempera- ture will then stay on.
4. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.
5. The bottle warmer will precisely keep the milk/water at the target temperature for 24 hours in the “24H” function to fit every baby’s preferences and to avoid overheating or being too cold. (It is not recommended to heat breast milk for too long.)

*Note:
At this setting, you can warm your milk at a slow pace and keep it warm at the right temperature. For example, to warm a bottle of 4o milk starting from room temperature, it will take 15-20 minutes. The warming time may be longer or shorter depending on the milk volume and initial temperature.

Sterilizing

1. Pour 100-150ml of distilled water into the bottle warmer. It is recommended to use distilled water to prevent scale. Put the bottle shelf into the bottle warmer first, then put the bottles and pacifiers upside down. Put the top lid on.
2. Press the ” ” button to choose the “Sterilize” function. The bottle warmer will automatically start sterilizing after 5 seconds when you finish selecting the function. Please take out the bottle/pacifier when the appliance beeps.
3. You can stop the sterilization process by pressing the ” ” button.
4. Be careful not to get burned when taking the bottle out after sterilization.

Heating Food at 70 °C/158 F

1. Pour distilled water into the bottle warmer up to the scale line indicated inside the bottle warmer.
2. Put the baby food in a heat-resistant container and then put the basket and the container into the bottle warmer.
3. Press the ” ” button to select the ” Food ” setting. The default temperature is 70°C/158F, and you can also adjust the temperature you need bytouching the ” + ” or ” – ” button. The bottle warmer will start working automatically in 5 seconds after you finish selecting the function.
4. During heating, the screen will display the set temperature flashing in degree centigrade. The food will be ready in about 1.5 hours, and the set temperature will then stay on. (Frozen meat puree may take up to 3 hours.)
5. Before heating and feeding, please remember to stir the food well and make sure the food can be heated evenly.

*Note:

1. Make sure to stir the baby food during warming as it does not circulate automatically.
2. Be careful not to burn your fingers when holding the container/jar while stirring.

Cleaning

1. Unplug the bottle warmer and let it cool down before cleaning
2. Do not immerse the working base in water for cleaning.
3. It is recommended to use distilled water to prevent scale buildup. Acetic acid or other descalers can help you clean the scale efficiently.

Descaling
To ensure the bottle warmer continues to work efficiently, it is recommended to descale it every four weeks.

1. Mix 10g of citric acid cleaner with 200 ml/3.4oz of cold water to descale the bottle warmer. Turn on the bottle warmer, select the Sterilize FUNCTION, then wait for 2-3 minutes after boiling, and the descaling is completed.
2. Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer. Switch on the bottle warmer, select the MILK WARMING FUNCTION, and wait for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved.

*Note:

1. Never let the bottle warmer dry out during the descaling process.
2. Do not use other types of descalers, as they may damage the bottle warmer

Troubleshooting

WARRANTY & CUSTOMER SERVICE
GROWNSY strives for user – friendly products for newborn and household items.We aim not only to provide a product, but also to item it with care and love to our customers. If you encounter any issues, please contact us directly and we will be happy to assist you.

REGISTER YOUR FREE WARRANTY
At GROWNSY we only use the highest quality products standard – but please don’t forget to register for your FREE one year warranty just in case…

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>