BOMANN EBO 7909 Household Built in Oven User Manual

BOMANN EBO 7909 Household Built in Oven

Product Information

Specifications

• Electric Connection: 220-240 V~ 50/60 Hz
• Power Consumption: 2400 W
• Rated Current: 16 A
• Protection Class: I
• Dimensions (H x W x D): Backofen: 59.0 x 59.5 x 52.0 cm
• Cabinet Cutout: 60.0 x 56.0 x min. 55.0 cm
• Net Weight: 30.5 kg

Product Usage Instructions

Installation
To install the oven, follow these steps:

1. Ensure the minimum distance of 760 mm (A) is maintained.
2. Leave a gap of 50 mm (B) on both sides of the oven.
3. Leave a gap of 35 mm (C) at the top of the oven.
4. Ensure a minimum air inlet of 30 mm (D) and an air outlet of 5 mm (E).

Inbetriebnahme / Betrieb
To start using the oven, follow these steps:

1. Perform the initial operation by referring to the detailed description of the control elements in the following sections.
2. Refer to the control panel for specific functions and settings.

Kontrollleuchten
The oven has the following indicator lights:

• Auto: Indicates automatic operation.
•  Indicates manual operation.
•  (Alarm): Indicates the timer function.
• Indicates the seconds display.

Funktionen der Zeitschaltuhr
The timer function allows you to set a specific cooking time. After the set time has elapsed, the oven will automatically turn off.

Backofen-Funktionen

• The oven has various cooking functions indicated by symbols.
• Refer to the manual for detailed explanations of each symbol.

General tips and guidelines for baking, roasting, and grilling in the oven:

• Ensure proper cookware is used.
• Follow energy-saving tips for efficient usage.

Reinigung und Wartung
To clean and maintain the oven, follow these steps:

• Clean the oven using appropriate cleaning methods. Avoid using abrasive materials.
• Replace the light bulb if necessary. Caution: Risk of burns!
• Clean the glass surfaces as needed.

FAQ

Q: What should I do if there is heavy smoke?
A: If there is excessive smoke, contact customer service or a professional technician.

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these instructions for use
Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage:

•   WARNING:
  This warns you of dangers to your health and indicates possible injury risks.

• CAUTION:
  This refers to possible hazards to the machine or other objects.

• NOTE: This highlights tips and information.

General notes
Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to other people, also pass on the operating instructions.

NOTE:

• Due to constant product modifications, your appliance may differ slightly from these operating instructions; Functions and methods of use remain unchanged.
• The illustrations in these operating instructions are for illustrative purposes only and may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any other purpose. Any other use is not intended and can result in damages or personal injuries.
• Operate the appliance only properly installed.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight and humidity.
• Do not operate the appliance without supervision.
• When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
• The appliance and if possible the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• For safety reasons, alterations or modifications of the appliance are prohibited.
• To ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:

• Do not allow small children to play with the foil.
• There is a danger of suffocation!

Special safety information for this unit
WARNING: Danger from electrical current! Contact with live leads or components can be fatal!

• The connection of the appliance must satisfy the relevant standards and regulations and may only be performed by an authorized specialist.
• Make sure that the appliance is turned off from the power supply (fuse) before changing the bulb in the oven.
• The use of high-pressure cleaners or steam cleaners is prohibited. Ingress of liquids can lead to electric shock. Put the appliance never un-der water.

WARNING: Hot surface! Risk of Burning!

• During operation the appliance and its accessible parts become hot. Special care must be taken to avoid touching heating elements. Children younger than 8 years must be kept away from the appliance.
• Grasp the oven only on the door handle and switches. Use potholders if you want to remove or insert the accessories.
• Let the appliance cool down before cleaning or maintenance.

WARNING: Risk of Fire!

• Do not leave the oven unattended; unattended cooking with fat or oil can be dangerous and cause fires. NEVER try to extinguish a fire with water.
• In the event of fire, switch off the appliance and disconnect it from the power supply. Use a suitable fire extinguisher or a fire blanket to extinguish the fire.
• The appliance is not intended for operation with an external timer or a separate remote-control system.
• Make sure that with installing adequate air circulations ensured and the ventilation slots are not blocked.
• To avoid overheating, do not install the appliance behind decorative doors.
• Only grill with the appliance door closed.
• Never pour liquids into a hot oven! Scalding by rising water vapor as well as possible damage to enamel.
• Do not place any objects on the open appliance door.
• Do not store any cleaning agents or flammable materials in the appliance or in the immediate vicinity.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children, unless they are older than 8 years and are supervised.
• Do not use harsh abrasive cleaners or sharp metal objects for cleaning the glass surface. The glass can be scratched or destroved.
• Do not try to repair the appliance on your own. Always contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons avoid a hazard.

Transport and packaging

Transport the appliance
If possible, transport the appliance in a vertical position. Secure the appliance sufficiently and protect it against weather during transport.

Unpacking the appliance

• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler and cardboard packaging.
• Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.
• To prevent hazards, check the appliance for any transport damage.
• In case of damage, do not put the appliance into operation. Contact your distributor.

NOTE:
Production residue or dust may have collected on the appliance. We recommend cleaning the appliance  according to chapter “Cleaning and maintenance”.

Appliance equipment

Appliance overview

1. Control panel
2. Door control button
3. Side racks
4. Grill grid
5. Standard oven tray
6. Appliance door
7. Door handle

Delivery scope

Installation

The built-in oven is designed for installation in standard kitchen units. It can be installed both in a tall cabinet and under a worktop. WARNING:
The installation and the connection to the main power may only be performed by an authorized specialist.

CAUTION:

• The worktop, the cabinet, veneers, plastic coatings, used adhesives etc. must be sufficient heat-resistant (min. 100°C).
• To ensure a sufficient cooling air supply, no heat protection strips may be installed.
• If there is a drawer below the furnace or it is attached, an intermediate shelf is required.

NOTE: Recommendation!

• When installing, ask another person to assist.
• Wear protective gloves to avoid injuries at possible sharp edges.
• When inserting, use the recessed grips on the side of the housing to lift the unit. Caution! Do not carry or hold the appliance by the door handle.
• Do not install the appliance directly next to refrigerators or freezers. The heat dissipation will un-necessarily increase its energy consumption!
• Before installation, check that the appliance and furniture dimensions match.

Safety distances

CAUTION:
Make sure that adequate air circulations ensured, and the ventilation slots are not blocked. Follow appropriate safety distances!

• The appliance must be installed so that heat can be dissipated. The ventilation openings must not be blocked (see illustration).
• Maintain sufficient distance behind the appliance at the installation site so that the appliance can work efficiently and well.
• The distance between the hob and the cooker hood must be at least as large as specified in the installation instructions for the hood!

Cabinet opening and appliance dimensions
Prepare the cabinet opening according to the dimensional drawings.

Dimensions in mm

Installing the oven

• Put the appliance with the connecting cable first into the prepared cabinet a bit.
• Do the connection to the mains, see “Electrical connection”.
• Push the oven completely into the cabinet opening. Make sure that the cables are free and not bent, squeezed or twisted.
• Attach and secure the oven by using the supplied screws on the side walls of the cabinet.
• 4x mounting holes are located left and right in the door frame.

Electrical connection
Information for the authorized expert!

WARNING:

• The installation to the mains supply must conform to the local standards and regulations.
• Improper connection may cause to an electric shock!
• Do not change the appliance plug! Let replace the mains plug by a specialist if this is not suitable for the appliance plug.
• Do not use multiple sockets or extension cords.
• Before connecting, ensure that the power supply corresponds with the information on the rating la-bel (door frame) and the wiring diagram.
• Connect the mains cable to a properly installed and earthed wall outlet.
• Arrange the mains cable in such a way that it does not get in contact with any hot components of the appliance. Do not lead it over sharp edges or corners.
• If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations.

Connected load
In total, the appliance can take up a rated power of approx. 2400 W. At this connected load, a separate supply line for the oven with a 16-ampere fuse is required.

Startup / Operation

Before initial use

• Clean the oven interior with all therein located accessories. Follow the instructions that we give you in the chapter “Cleaning and maintenance”.
• To burn off possible production residues, heat the closed oven for approx. 30 minutes at maximum temperature (250°C_top/bottom heat).

NOTE:
The occurring odor and possibly a slight smoke development cannot be avoided. So, ensure that  the room is well ventilated during the heating process.

Operation overview
The detailed description of the individual controls can be found in the following sections.

Control panel

1. Function selector control
2. Operating control lamp
3. Temperature selector control
4. Temperature control lamp
5. Digital timer with LED display

1. Function selector control
   The function selector control is used to set the heating mode. To set a function, turn the control to the symbol with the desired heating mode.

2. Operating control lamp
   The control lamp indicates the oven operation.

3. Temperature selector control

4. CAUTION: Only turn the temperature selector control clockwise  and back again. Otherwise, the control will be damaged.

5. The temperature selector control is used to set the oven temperature. The thermostat allows tempera-ture setting in the range from 50°C to 250°C.

6. Temperature control lamp

7. The control lamp indicates heating operation.

8. If the light goes out, the set oven temperature has been reached.

9. During operation, the oven must be reheated again and again to maintain the set temperature. During re-heating, the control lamp lights up (thermostat func-tion).

10. NOTE: If the recipe recommends placing the food in the pre- heated oven, this should not be done before the control light first goes out.

Digital timer with LED display
The display is used to set the time and the various functions of the timer. Use the buttons and to make the settings.

Control lamps

1. Auto mode
2. Manual mode
3. Minute minder (alarm)
4. Second dot symbol

Function buttons

NOTE: Touch Control

• The buttons respond to a light touch. You do not need to apply pressure.
• The unit responds best when the buttons are touched with the tip of your finger.

Switching operation on and off
After connecting to the power supply, the display [00•00] appears and the symbol (4) flashes:

• first select the beep volume
• and then set the time of day (system time) to put the appliance into operation.

Setting the signal tone volume

• You have the option of selecting 3 volume levels.
• While the dot symbol (4) is flashing, you can select the volume level using the button.

Setting the system time

• Set the current time of day:
  • Keep pressing the button for manual mode for about 3 seconds to set the time of day. The symbol (2) for manual mode lights up.
  • While dot symbol (4) flashes between hour and minute, you can make the setting with the buttons   and .
  • If you want to change the volume or the system time subsequently, the setting is only possible under standby mode, if no cooking program is running. The setting procedure remains unchanged.

Manual mode
Operation without setting timer functions.

• Keep pressing the button for manual mode for about 3 seconds to start operation. While the symbol (2) is flashing, manual operation is activated.
• The oven is equipped with various functions, see “Oven functions”. Set the required operating conditions.
  • Turn function selector control to position.
  • Turn temperature selector control to position.

Oven lighting
The oven lighting switches on automatically during oven operation. The lighting can also be switched on separately via the function selector switch, independently of operation.

End of manual operation

• To switch off the oven, turn both controls back to the off position.
• To prevent unintentional operation, hide the oven selector controls in the control panel → only possible if the controls are in the off position!

Cooling fan

• The circulating air fan continues to run for some time after preparation is complete.
• Do not interrupt the power supply of the appliance during this process.

Automatic switch-off
If you have not set a cooking time or a timer function, the oven switches off automatically after about 10 hours for safety reasons.

Timer functions
WARNING: Fire hazard! There is an increased risk of fire when the timer is in operation!

• Before starting, inform all household members so that no one puts anything in the appliance.
• Monitor the appliance during timer operation to prevent food from overflowing and/or burning.
• Be aware that fats, oils and alcohol can ignite during frying.
• Never grill unattended during timer operation

GENERAL NOTES to the timer functions

• While dot symbol (4) flashes between hour and minute, you can make the setting.
• The setting is saved some time after the last but-ton is pressed. The display shows the time of day.
• The Auto mode symbol (1) indicates that a function which ends the oven operation after preset time is active.
• Press the button in manual mode twice and display the remaining time of the timer setting.

Using timer as reminder function (minute minder) after XX•XX hours

• You can set the alarm independently of the operation. It does not influence the appliance.
• Use the function e. g. as a reminder to add spices or baste the food after a certain time.
  • Press the button twice for the alarm, the symbol (3) lights up and the display shows [00•00].
  • Set the alarm time up to 23 hours and 59 minutes using the buttons and .
• The symbol (3) for the alarm indicates that the alarm time is activated.
• After the alarm time has elapsed, the symbol (3) flashes and several signal tones sound until any but-ton is pressed. Otherwise, the signal tones continue to sound for a few minutes.

Using timer to switch off operation after XX•XX hours

• Press the button three times for the cooking time, the symbols (1) and (2) light up and the dis-play shows [00•00].
• Set the cooking time up to 10 hours using the buttons and .
• Select the desired heating function and temperature to start the operation.

Using timer to switch off operation at XX•XX o’clock

• Press the button four times for the cooking stop, the symbols (1) and (2) light up and the dis-play shows [00•00].
• Set the time of day at which the operation should switch off using the buttons and .
• Select the desired heating function and temperature to start the operation.

Using timer to delay cooking time and to switch off operation at XX•XX o’clock

First set the cooking time as under “Using timer to switch off operation after XX•XX hours”.

• Immediately press the button for the cooking stop again and set the time as under “Using timer to switch off operation at XX•XX o’clock”.
• Select the desired heating function and temperature.
  The appliance uses the previously set cooking time to calculate the time of day at which the operation will start automatically to reach the selected time of day for switch off.

End of automatic cooking

• After the set cooking time has elapsed or when the previously set time of day is reached, the operation switches off automatically.
• The symbol of the corresponding operating function flashes and several signal tones sound until any but-ton is pressed. Otherwise, the signal tones will con-tinue to sound for several minutes.
• ATTENTION! Turn the selector controls back to the off position, otherwise the operation will continue automatically as soon as the manual mode button is pressed.

Door control button

• If you open the appliance door during operation with an active timer function, oven stops working (heating pause, oven light off). The system time flashes and the symbols (1), (4) and (2) light up continuously.
• If you close the appliance door, operation continues automatically.
• If the appliance door remains open, the oven function is suspended, but the end of the timer function is still signaled by an alarm.

Existing the timer function prematurely
Reset the time entry in the respective function to 00•00 or to the current time of day to end this function prematurely.

• To do this, press the button : twice for the alarm three times for the cooking time four times for the cooking stop three times + once for the cooking time and the cooking stop.
• Now set the times with the buttons and .

Oven functions

the oven operation, e. g. for cleaning the oven.
**| Bottom heat with circulating air: the heat is supplied to the food from below. In addition, the heat is distributed by a fan. Ideal for baking pizza.
**| *Top/bottom heat: The heating is done in a conventional way. The heat is evenly brought to the food from above and below. Suitable for baking and roasting on one level.
**| Circulating: the heat generated by the upper and lower heating elements is evenly distributed by an additional fan. Ideal for faster cooking on several levels.
**| Grill: only the grill heating element is in operation. Ideal for grilling or gratinating meats, casseroles, toast, etc.
**| Extra grill: the top heat is switched on in addition to the grill. The food is browned more intensively. This function allows to reach a higher temperature in the upper part of the oven, the roast is browned more intensively; larger portions can also be grilled this way.
Symbol| Description
---|---
| Extra grill with circulating (all-round grill): the top heat, the grill heating element and the circulating air fan are switched on. The circulating grill system replaces the rotisserie when pre- paring meat, for example.
| Convection: with an additional ring heating element behind the circulating air fan, a hot air stream heats the food evenly from all sides. Suitable for simultaneous cooking on several levels.
|

• Defrosting (circulating air fan): Room temperature air circulation allows quick defrosting of frozen food (without using heating elements). It is a gentle but quick way to speed up the defrosting time of e. g. vegetables or pre-cooked food.
• WARNING! Do not defrost meat or fish in the oven, there is a risk that the number of dangerous microorganisms such as salmonella will increase.

|

• ECO: particularly economical heating mode. The top/bottom heat is combined with an eco-function.
• The temperature is intelligently controlled and residual heat is used for cooking in phases. This can reduce energy consumption.

*This type of heating is used to determine the energy consumption in conventional mode.

Using the accessory

CAUTION:
Always insert the accessory right way and completely into the oven; the glass door can be scratched.

There are side racks with several levels (E) in the cooking chamber for inserting the accessories (1+2) in different heights. The accessories are safely used between these levels. ATTENTION!
Push the grill grid into the oven with the notch (a) facing downwards and backwards.

Telescopic runner (delivery scope model dependent)
It is possible to retrofit the appliance with one or more telescopic runners. Order telescopic runner set from your dealer or in our online accessories shop www.bomann-germany.de. Use the reference number found under “Technical data”.

The right ovenware

• Pots with heat-resistant handles, recognizable by the marking “temperature-resistant up to 280°C”.
• Fireproof molds made of glass, porcelain, ceramic, clay or cast iron.
• In particular, ovens with top and bottom heat need molds and trays with good heat transfer, preferably made of black lacquered metals. Cakes brown particularly well in them.
• Aluminum trays, with or without coating, give good results.
• Unsuitable is cookware of bright, shiny aluminum, unglazed clay and tableware made of plastic or with plastic handles.

General notes for baking, cooking and grilling in the oven

NOTE :

• Use the accessories included in the delivery.
• Temperature and duration depend on quantity and recipe. Always follow the instructions for the duration of the completion in your recipes and preparation instructions on the product packaging.

Baking

• For good baking results, preheating is recommended up to the desired temperature.
• After finishing the baking process, we recommend resting the food for about 5 minutes in the oven.
• Before removing the cake, check if it is done by using a wooden stick. When the cake is done, no dough residue will stick to the wooden stick.

Cooking and roasting meat & fish

• Only cook meat of maximum 1 kg in the oven. We recommend roasting or cooking smaller portions on the cooking hob.
• When using the grill grid for roasting, we recommend placing a baking sheet with some water on the lower level.
• At least once after half of the cooking time, the roast should be reversed; sprinkle the roast during cooking now and then with the resulted roast liquid or with hot, salty water, thereby not using cold water.

Grilling

CAUTION:

• Grill exclusively with the oven door closed!
• Supervise the grilling process, the grilling food can burn rapidly due to the intense heat!
• Preheat the oven for approx. 5 minutes.
• Brushes the grill grid with a little oil, so that the grilling food does not stick on it.
• Slide an empty baking tray for dripping grease to directly lower level, below the grill grid. Pour some water into the baking tray for later easily cleaning.

Energy saving tips
Information to reduce the environmental effect of cooking (acc. VO (EU) No. 66/2014 appendix I, No. 2)

• We recommend the use of dark baking molds and plates because they conduct the heat better.
• Any unnecessary accessories should be removed from the baking chamber before using the appliance.
• During cooking, the oven door should remain closed to avoid unnecessary heat loss.
• Only preheat the oven if required by the recipe.
• If a selection of cooking time is specified, always use the lowest recommended temperature.
• Use the residual heat by switching back to mini-mum temperature shortly before the end of the cooking time.
• Save electricity! If you do not need the oven, switch off functions such as interior lighting, pro-gram, temperature
• Clean the oven after each application, to keep the cleaning effort as low as possible. We recommend the use of biological cleaners.

Cleaning and maintenance

WARNING:

• Always switch off the appliance completely before cleaning and maintenance work and disconnect it from the power supply if necessary.
• Allow the unit to cool down before cleaning.
• Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components. Risk of electric shock! Hot steam could damage the plastic parts.
• Never use flammable substances, such as thinner, kerosene, gasoline or acids for cleaning.
• The unit must be dry before restarting operation.

CAUTION:

• Do not use a wire brush or other sharp, abrasive items.
• Do not use harsh abrasive cleaners or sharp metal objects for cleaning the glass surface. The surfaces can be scratched or destroyed.
• Always consider the application and safety notes of the detergent.

Removing the oven door
For cleaning and easier access to the oven chamber, the appliance door can be unhinged.

• Open the appliance door completely.
• Fold the opposite retaining brackets of the hinges upwards.
• Close the appliance door slightly and lift it out up-wards.
• When inserting the door, make sure that the notch of the hinge fits correctly on the protrusion of the hinge holder.
• Fold the retaining brackets back down, otherwise the hinges may be damaged when closing the appliance door.

Cleaning the oven

NOTE :

• By cleaning after each use, you avoid that cooking residues, soiling burn in during the next operation.
• Cleaning is then only possible with a lot of effort.
• Depending on the degree of soiling and the sur-face, clean the appliance and accessories only with a soft, damp cloth and commercially available, food-safe cleaners.
• Soak stiffly soiled areas with a little warm dish-washing liquid or vinegar cleaner.
• Wipe off grease residues on the seal surrounding the cooking chamber.
• After cleaning, use a soft absorbent cloth to dry.

Cleaning the side racks
Always remove the side racks when you want to clean the oven walls thoroughly. You can soak heavily soiled side racks when they are removed to make cleaning easier.

• Remove the rack by slightly bending the lowest metal rod to loosen it from the mounting screw and pulling it towards the oven center.
• Lift the rack upwards out of the upper mounting holes.
• Replace the racks after cleaning and drying them thoroughly.

Cleaning the glass panes
If necessary, clean the inside of the glass panes.

• Open the oven door.
• Remove the support bar by loosening the screws on the side of the bar.
• Carefully remove the glass panes forward from the holder.
• Replace the glass panes and fasten the retaining strip after you have cleaned and thoroughly dried the glass.

Changing the bulb

• WARNING:
  • Make sure that the appliance is turned off from the power supply (fuse).
  • Allow the lamp to cool down before replacing the bulb. Danger of burns!
• NOTE:
  • Use the correct bulb, heat resistant up to 300°C:

G9 Halogen – 1 x 25 W – 220-240 V~

• Unscrew the lamp cover and clean it with a dry cloth.
• Change the bulb.
• Screw the lamp cover on tightly and check for proper operation.

Troubleshooting

Before you contact an authorized specialist

securely seated in the socket, see “Changing the bulb”.
Strong smoke development| Grease residues in the oven chamber, switch off the oven, al- low to cool before cleaning.

NOTE: If a problem persists after following the steps above,  contact your distributor or an authorized technician.

Technical data

• Electrical connection……………………………………..
• Connection voltage: …………….220-240 V~ 50/60 Hz
• Rated power: ………..……………..…..………..2400 W
• Rated current: ………………………………………..16 A
• Protection class: …………………………………………I
• Dimension H x W x D / weight……………..…………..
• Oven: ……………………….……59.0 x 59.5 x 52.0 cm
• Cut-out cabinet: …………..60.0 x 56.0 x min. 55.0 cm
• Net weight: ………………….………….…………30.5 kg
• Available accessories……………………………………
• Telescopic runner set: …………..…Art. no. 8 979 090
  ………………………………………………(not supplied)

The right to make technical and design modifications during continuous product development remains re-served.
This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

• Meaning of the “Dustbin” symbol
• Protect our environment; do not dispose of electrical equipment in the domestic waste.
• Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
• This helps avoid the potential effects of incorrect disposal on the environment and human health.
• This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment.
• Information concerning where the equipment can be disposed of can be obtained from your local author-ity. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

WARNING :
Remove or disable any existing snap and bolt locks if you take the unit out of operation or dispose it.

Information to professional users for disassembly (acc. VO (EU) No. 66/2014 appendix I, No. 2)
Information for non-destructive disassembly for maintenance purposes

• Remove the lamp as described in the manual.
• For maintenance purposes, the oven door can be unhinged out and reinstalled, for the procedure please refer to the manual.
• A further disassembly for maintenance purposes is not provided.
• If you would like to exchange defective compo-nents, please contact our customer service.
• Motors must be expertly replaced by customer service in accordance with the repair instructions and disposed accordingly.
• Accumulators are not included.
• Information for disassembly in terms of recycling, recovery and disposal at the end of the life of the appliance
• The disassembly of appliances with a gas connection should only be carried out by a licensed gas and water installer.
• The disassembly of appliances with electrical connections should be carried out by a licensed electrician.
• For the recycling and recovery of resources give the appliance to:
  • a communal collection point waste disposal authority,
  • a dedicated disposal company, offering a return system,
  • a resident electric trader, who voluntary with-draws electrical appliances.

EU product data sheet

Product information for domestic ovens according to EU 65-66/2014

| Symbol| Value| Unit
---|---|---|---
Brand| | BOMANN|
Model identification| | EBO 7909|
Type of oven| | built-in oven|
Mass of the appliance| M| 30.5| kg
Number of cavities| | 1|
Heat source per cavity (electricity or gas)| | electricity|
Volume per cavity| V| 56| l
Energy consumption (electricity) required to heat a standardized load in a cavity of an electric heated oven during a cycle in conventional mode per cavity (electric final energy)| ECelectric cavity| 0.75| kWh/cycle
Energy consumption required to heat a standardized load in a cavity of an electric heated oven during a cycle in fan-forced mode per cavity (electric final energy)| ECelectric cavity| 0.77| kWh/cycle
Energy consumption required to heat a standardized load in a gas-fired cavity of an oven during a cycle in conventional mode per cavity (gas final energy)| ECgas cavity| –| MJ/cycle kWh/cycle (1)
Energy consumption required to heat a standardized load in a gas-fired cavity of an oven during a cycle in fan-forced mode per cavity (gas final energy)| ECgas cavity| –| MJ/cycle kWh/cycle
Energy efficiency index per cavity| EEIcavity| 94.9|
Energy efficiency class (2)| | A|
Off-mode
Standby mode (timer)| | 0.0

0.8

| W

W

1. 1 kWh/cycle = 3.6 MJ/cycle
2.  A+++ (highest efficiency) to D (lowest efficiency)

Tested acc. to: EN 60350-1
EN 50564

C. Bomann GmbH
www.bomann-germany.de Made in P.R.C.

Documents / Resources

| BOMANN EBO 7909 Household Built in Oven [pdf] User Manual
EBO 7909 Household Built in Oven, EBO 7909, Household Built in Oven, Built in Oven, Oven
---|---

References

• Cronon GmbH - Professional IT Services IT-Services
• Bomann Startseite
• Bomann Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>