milwaukee M18 IL LED Inspection Light Instructions
- June 4, 2024
- Milwaukee
Table of Contents
Nothing but HEAVY DUTY®
M18 IL
Original instructions
M18 IL LED Inspection Light
Picture section with operating description and functional description
TECHNICAL DATA
| High Level | 15 h |
|---|---|
| Low Level | 30 h |
| Battery voltage | 18 V |
| Weight according to EPTA-Procedure 01/2014 (2.0 Ah)Protection class | 900 g |
| dust (ø ≥ 12.5 mm) and water resistance | IP 24 |
**WARNING!** Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors off er to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only compatible Milwaukee chargers from the same battery platform for
charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with the battery, acid washes it off
immediately with soap and water. In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don‘t use this tool in wet areas.
Warning! To reduce the risk of fi re, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack, or charger in
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, bleach or bleach-containing
products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The Stick Light is intended to be used, for light-independent use away from
the mains supply.
Do not use this product in any other way as stated for normal use.
BATTERIES
Battery packs that have not been used for some time should be recharged before
use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after
use.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture Store the battery packs in a 30% – 50% charged condition Every six
months of storage, charge the pack as normal.
MAINTENANCE
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses). If needed, an
exploded view of the tool can be ordered. Please state the machine type
printed as well as the six-digit No. on the label and order the drawing at
your local service agents or directly at Techtronic Industries GmbH, Max-Eyth-
Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| CAUTION! WARNING! DANGER!
---|---
| CAUTION: Possibly hazardous optical radiation emitted from this
product. Do not stare at the operating lamp. May be harmful to the eye.
| Please read the instructions carefully before starting the machine.
| Do not dispose of electric tools, batteries/ rechargeable batteries together
with household waste material. Electric tools and batteries that have reached
the end of their life must be collected separately and returned to an
environmentally compatible recycling facility. Check with your local authority
or retailer for recycling advice and collection point.
| Safety class III
| This tool is only suitable for indoor use. Never expose tool to rain.
| European Conformity Mark
| British Confomity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ UK
Documents / Resources
|
milwaukee M18 IL LED Inspection
Light
[pdf] Instructions
M18 IL, LED Inspection Light, Inspection Light, LED Light, Light, M18 IL
---|---
|
milwaukee M18 IL LED Inspection
Light
[pdf] Instructions
M18 IL, LED Inspection Light, Inspection Light, LED Light, Light
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>