ZWILLING 53100-000 Enfinigy Power Blender Instruction Manual
- June 4, 2024
- ZWILLING
Table of Contents
ZWILLING 53100-000 Enfinigy Power Blender
Safety
Read these operating instructions in their entirety before using the kettle. Keep these operating instructions in a safe place. If you transfer the kettle to a third party, ensure that you include the operating instructions in such a transfer. Non-observance of these operating instructions can lead to serious injury or damage to the appliance. Zwilling does not accept any liability for damage caused by non-observance of these operating instructions. Important information for your safety is specifically marked. Make sure to observe this information in order to avoid accidents and damage to the appliance:
Safety information
The kettle (hereinafter referred to as the “appliance”) is intended exclusively for heating household quantities of cold non-carbonated drinking water.Any other use is considered improper and may result in personal injury or property damage. Do not heat any other liquids or foods in the appliance. The appliance is intended for domestic use. It is not intended for commercial use. The appliance can be used in the following household-like environments:
- in kitchens for employees in shops, offices and other commercial areas
- in agricultural operations
- for use by customers in hotels, motels and other similar living environments
- in bed and breakfasts
The water container may only be operated with the supplied base. Certain persons are at greater risk: This appliance may be used by children 8 years of age and older and by persons with reduced physical, sensory or mental capacity or with a lack of experience and knowledge if such children and persons are supervised or have been instructed in the safe use of the appliance and understand the hazards resulting from using the appliance. Children are not allowed to play with the appliance. Cleaning and maintenance may be carried out by children older than 8 if supervised. Keep the appliance and its power coordinated a location that is not accessible to children under 8 years old. Keep children away from the packaging material. It poses a risk of suffocation. The appliance is operated with an electric current. There is therefore a danger of electric shock: Only plug the appliance into a correctly installed, earthed socket that any leaking water cannot access. Only operate the appliance if the voltage stated on the rating plate matches the voltage of your socket. The appliance has a high power consumption. For this reason, do not connect the appliance to multiple sockets or extension cables. Make sure that the power cord is not kinked or pinched and make sure that the power cord and the appliance do not come in contact with sources of heat (e.g. hobs, gas flames). When unplugging the power plug from the socket, always unplug the power plug directly. Do not carry the appliance by the power cord. Never touch the power plug and the base with wet hands. Do not allow liquids to come into contact with the base. Take the water container off the base when filling it.
If the base comes into contact with liquids, unplug the power plug, soak up the liquid and let the base dry. Never touch the base with metal objects when it is plugged in. Do not insert any objects into the openings on the appliance. Do not remove the water container from the base when it is switched on and ensure that the appliance is switched off when placing the water container on the base. As long as the power plug is plugged in, there is a voltage inside the appliance, even if the appliance is switched off. After every use and in the event of danger or a defect, unplug the power plug from the socket immediately. For this reason, keep the socket into which the appliance’s power plug is plugged easily accessible at all times. Unplug the appliance from the socket prior to cleaning it. Never unscrew the appliance and do not make any technical modifications. Never immerse the appliance in water or other liquids, do not clean it under running water and never put it in the dishwasher. When the appliance is switched on, there is a risk of scalding from boiling water or hot steam: Always guide the cable through the cable bushing on the underside of the base to ensure that the appliance is stable. Fill the water container to the MAX marking at most, and never above, as otherwise, hot water could spray out.
Only switch the appliance on when the lid of the water container is closed completely. Do not move or transport the appliance while boiling is in process. Never open the lid while the water is boiling. Only open the lid when the hot water has been completely poured out. Never top up the water while the appliance is running. Hot steam emerges during the boiling process. This is normal. Keep away from the lid of the water container while boiling is in process. When the appliance is switched on and immediately after boiling, there is a risk of burns on hot housing parts: Only hold the water container at the handle provided for this purpose. Let the appliance cool down for a while prior to carrying out maintenance. The bottom of the water container remains warm for a long period. Water may spoil if it is left in the appliance for several days: Do not leave any water in the appliance when it is not in use. Pour out any water that is not required. Clean the appliance regularly. A faulty appliance can cause damage and injuries: Check the appliance for damage prior to each use. If you detect any transport damage, contact the dealer from whom you purchased the appliance immediately. Never operate a faulty appliance. Never operate an appliance that has been dropped.
The appliance needs to be repaired in the event of a fault or a damaged power cord. The appliance does not contain any parts that you are able to repair yourself. Damage may occur if the appliance is handled incorrectly. Place the appliance on a dry, level and non-slip surface. Do not place the appliance on a hot surface or in the vicinity of strong sources of heat. Do not place the appliance on a surface that could be damaged by water and heat (e.g. untreated wood). Position the appliance so that other objects and furniture (e.g. wall cabinets) are not damaged by the steam and heat that emerges. Do not let the power cord hang down. After use, store the cable in the cable compartment on the underside of the appliance. Never operate the appliance without water or with too little water. Fill the water container to the 0.25 litre marking at a minimum. Before you store the appliance: Unplug the power plug and let the appliance cool down completely. Allow the appliance to dry completely at room temperature or dry it with a cloth
Explanation of symbols
- The danger of death due to electric shock
- The danger of burns on hot surfaces and danger of scalding from hot water
Technical data
- Power supply 220 – 240 V∼, 50/60 Hz
- Energy consumption/Power 1550–1850 W
- Filling quantity 0.25 l bis max. 1.5 l
- Length of the power cord 0.7 m
- Dimensions (W x H) 223.1 x 238.3 mm
- Weight approx. 1.3 kg
Overview
- Lid
- Button to open
- Handle
- On/off switch
- Power cord
- Base
- Water container
- Limescale filter
Operation
Putting the kettle into operation
Prior to first use, you must unwind the power cord completely and guide it
through the opening on the base.
Filling the water
To fill with water, lift the water container from the base using the handle
and press the button to open the lid. There is a measuring scale for cups and
litres on the inside. After filling, close the lid in such a way that it
audibly clicks into place.
Observe the MAX marking for the maximum water volume. Do not overfill.
Boiling water
To boil water, you must first place the filled water container on the base and
press down the on/ off switch.
Do not open the lid while boiling is in process.
Interrupting a boiling process
If you wish to stop boiling prematurely, push the on/off switch up.
Removing water
The boiling process has ended when then the on/off switch springs up. To pour
out, lift the water container from the base using the handle.
Leave the lid of the water container closed when pouring.
Maintenance
Cleaning the water container and base
You can clean the base and the water container with a damp, lint-free cloth.
Prior to cleaning, unplug the power plug and let the water container cool down.
Decalcification
Filling with water and vinegar essence
To decalcify, fill the water container to the MAX marking with water and add 2
tablespoons of vinegar essence. Then boil the water and let it stand for 1
hour before pouring it out.
Decalcify regularly, before visible limescale forms.
Rinsing the water container with clear water
To rinse, fill the water container with clear water again, boil the water and
then pour it out.
Fault / Customer Service / Disposal
Customer service
Please contact our customer service should you encounter any problems with
your kettle. Detailed information on service, repairs, warranty and product
registration can be found at
www.zwilling.com/service.
Disposal
With regard to disposal, please return your old appliance to a collection
point for electrical appliances.