Digital Ally DVM-800 Lite In-Vehicle Camera Kit Instructions
- June 9, 2024
- Digital Ally
Table of Contents
Digital Ally DVM-800 Lite In-Vehicle Camera Kit Instructions
The Digital Ally DVM-800 Lite is a complete digital in-vehicle video recording
system integrated into a replacement vehicle rearview mirror. The unit
contains the digital video/audio recorder, solid state storage memory, 3.5”
color monitor, microphone, speaker, battery backup and system controls. A
900MHz Wireless Microphone Kit, 32GB SDHC card, mounts, cables, lifetime
firmware upgrades, operating manual and two-year Advanced Exchange Warranty
are included with the DVM-800 Lite Kit.
With the DVM-800 Lite, you can achieve higher quality recordings without the
file size of HD. The DVM-800 Lite has enhanced 720-pixel codec and
customizable quality settings.
NEVER MISS AN IMPORTANT EVENT
Evidence Capture Assurance (ECA)
ECA tells the system to record on a continuous loop. Individual events are
recorded, but ECA enables an agency to go back and look at video from an
entire shift.
Pre-Event Recording
With Pre-Event enabled, the system is always recording the last 30 seconds to
capture the events leading up to the activation of a recording
ENHANCED VIDEO AND AUDIO
High Quality Video | Crystal Clear Audio Our cameras have high quality video
ranging from Enhanced D1 Resolution to full HD Resolution. With the
combination of our mirror units built in cameras and multiple options for
external cameras, you can customize your video feeds, with up to two channels
recording simultaneously. Our wireless microphone records enhanced audio for
up to 3000 feet from the vehicle.
CUSTOM SOLUTION TO FIT YOUR NEEDS
Highly Configurable Systems
Our camera systems can be configured to work in any way your agency needs. All
of our systems have multiple settings that you can configure to make the
solution fit any requirements your policy might have, such as, audio/video
quality, preevent customization, user control, multiple camera options, and
more customization on the back-end with our VuVault Software series and
VuVault.com cloud solution.
Included with Purchase:
- DVM-800, Main Unit 32GB
- 32GB SDHC card
- DVM Mount Assembly with Integrated 3.5” color monitor (can be invisible when not in use)
- 900MHz Wireless Microphone with 1000-foot range
- Two in-car covert microphones
- Accessory Kit: Includes Windshield Mounting Puck, Lanyard, Mounting Hardware, Security Tamper Resistant Screw & Key Kit
- Road-facing Camera with Infrared illumination built into the rearview mirror
- Smart Infrared Backseat-facing Camera
- Vehicle Input Controller (modeiiFE-20)
- Main Power Cable to IF Box, 3.1 m (10.1ft.)
- Vehicle Input Controller Cable to DVM 4.6m (15.0ft.)
- DWM-928 System (900MHz) Includes Wireless Microphone, Charging Cradle, Mounting Bracket, and Lapel Microphone
- Backseat Microphone for DWM-928, 20ft., 2.5mm plug
- USB 2.0 Type A to Mini-B Cable, 3.3 ft.
- Wireless Microphone to DVM-800 Cable
- Vehicle Input Controller, Sensor, RJ45 Cable
- Reference Guide
Specifications for DVM-800:
POWER
Operating Voltage| 13.8VDC
On| 360mA @ 13.8VDC
Off| 260uA @ 13.8VDC
Low Power Standby| 170mA @ 13.8VDC
Backup Battery| 3.7v, 1150mA, Rechargeable Lithium Ion Polymer Battery
ENVIRONMENTAL/MECHANICAL
Operating Temperature| -20° to +70° C
Storage Temperature| -40° to +80° C
Dimensions| 48mm (1.9in.)(D) x 279mm (11in.)(W) x 106mm (4.7in.)(H)
Weight| 733g (1.62lbs)
INTERNAL COMPONENTS
LCD Monitor| 3.5” Color Ultra Bright. 640×480 resolution
Real Time Clock| On board, used when GPS signal is lost
Accelerometer| 3-axis, ±8g
Wi-Fi| 802.11(n) wireless adapter included. Secure FTP transfer through WAP or
cellular modem
Microphone| Internal (max. input SPL 110dB, sensitivity -30dB)
GPS Receiver| 4Hz position update rate, 2.5m position accuracy
Video| 2-recording channels @ 30fps(max), H.264, AVI container
Audio| Stereo (internal to one channel, external on other)
MEDIA STORAGE
Capacity| External SD Card Support: 8/16/32 GB, Class-10, commercial grade
80 R MB/s, 50 W MB/s Internal Memory matches external
Secure Media Access| Optional tamper resistant screw can be installed in
the access door, requiring the corresponding security key to unlock the access
door. (included with the DVM)
Pre-Event Buffer| Up to 30 seconds for each of the two recording channels,
adjustable in 6 second increments
Vehicle Input Controller
Dimensions| 57mm (2.24in) (D) x 29mm (1.14in) (H) x 110mm (4.33in) (L)
Input Triggers (Sensors)| Six customizable multi-purpose input triggers.
Operating Voltage| 13.8VDC
Output Alarm| One (1) normally open, active low output trigger, 2A maximum
current
Operating Temperature| -20° to +70° C
Storage Temperature| -40° to +80° C
Radar Support| 9 Pin Serial Female (additional cables required)
Wireless Microphone Specifications:
System Range | 3000 feet typical |
---|---|
Communication | Bidirectional |
Microphone Sensitivity | -30dB, Maximum Input SPL 110dB |
Power | External 12VDC, 0.190mA typical |
__ Size | DWM Cradle: 2.75in x 2.99in x 3.15in (70mm x 76mm x 80mm) DWM |
Microphone: 2.5in x 1.8in x 0.94in (64mm x 46mm x 24mm)
Weight| DWM Cradle (BTR800): 233gDWM Wireless Microphone (RMT800): 74g
Battery| Internal Li-ion 3.7V/1800mAh cell20 hours In Use with full
charge, 14 days Standby 4 hours charge time
---|---
Frequency| 900MHz FHSS, 50 possible channels
Frequency Response| 200 ~ 4200Hz +/- 3 dB Audio
Pair with these other Digital Ally Products:
- FirstVu HD Body Camera
- 12-Bay Docking Station
- VuLink for Automatic Activation
- VuVault Software
14001 Marshall Dr
Lenexa, KS 66215
Web: www.digitalallyinc.com
Tel: 800.440.4947
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>