Whirlpool W4OMK38HU0BA Oven User Guide
- June 15, 2024
- Whirlpool
Table of Contents
**Whirlpool W4OMK38HU0BA Oven User Guide
**
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please register your product on www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
FIRST TIME USE
HEAT THE OVEN
A new oven may release odors that have been left behind during manufacturing:
this is completely normal. Therefore, before starting to cook food, we
recommend heating the empty oven in order to remove any possible odors. Remove
any protective cardboard or transparent film from
the oven and remove any accessories from inside it. Heat the oven to 250°C for
about one hour: The oven must be empty during this time. Follow the
instructions for setting the function correctly
Please note: We recommend to ventilate the room after using the appliance for
the first time.
CONTROL PANEL
-
SELECTION KNOB
For switching the oven on by selecting a function. Turn to the position to switch the oven off. -
TIMER KNOB
Useful as a timer. -
THERMOSTAT KNOB
Turn to select a desired temperature, activating the selected function -
LED THERMOSTAT / PREHEATING
Switches on during the heating process. Switches off once the desired temperature is reached.
Please note: Placing the food in the oven before preheating has finished may have an adverse effect on the final cooking result.
Please note: Type of knobs may vary from model type. If the knobs are push activated, push down on the center of the knob to release it from seating
ACCESSORIES
The number and type of accessories may vary depending on which model is purchased. Other accessories that are not supplied can be purchased separately from the After-sales Service.
Insert the wire shelf onto the level you require by holding it tilted slightly upwards and resting the raised rear side (pointing upwards) down first. Then slide it horizontally along the shelf guide as far as possible. The other accessories, such as the baking tray, are inserted horizontally by sliding them along the shelf guides
REMOVING AND REFITTING THE SHELF GUIDES
The shelf guides can be removed to facilitate the oven cleaning: pull them to remove from their seats.
Available only on certain models.
WIRE SHELF Use to cook food or as a support for pans, cake tins and other ovenproof items of cookware.
DRIP TRAY* Use as an oven tray for cooking meat, fish, vegetables, focaccia, etc. or position underneath the wire shelf to collect cooking juices
BAKING TRAY* Use for cooking all bread and pastry products, but also for roasts, fish eon papillate, etc.
SLIDING RUNNERS* To facilitate inserting or removing accessories.
FUNCTIONS & DAILY USE
SELECT A FUNCTION
To select a function, turn the selection knob to the symbol for the function you require.
OFF
For switching off the oven
LIGHT
For switching on the light in the compartment
CONVENTIONAL
For cooking any kind of dish on one shelf only
SMART CLEAN (Available only on certain models) The action of the steam released during this special lowtemperature cleaning cycle allows dirt and food residues to be removed with ease. To activate the “Smart Clean” cleaning function pour 100-120ml of drinking water into the bottom of the oven then turn all the 3 knobs (selection knob, timer knob, thermostat knob) to icon.
CONVENCTION BAKE
For baking cakes with juicy fillings on a single shelf. This function can also
be used for cooking on two shelves.
GRILL
For grilling steaks, kebabs and sausages, cooking vegetables au gratin or
toasting bread. When grilling meat, commend using a tray to collect the
cooking juices: Position the tray on any of the levels below the wire shelf
and add 200 ml of drinking water.
TURBOGRILL
For roasting large joints of meat. We recommend using a tray to collect the
cooking juices: Position the tray on any of the levels below the wire shelf
and add 200 ml of drinking water.
DEFROSTING
For defrosting food more quickly
BOTTOM HEATING
For browning the bottom of the dishes. The function can also be used for slow
cooking, to finish cooking very liquid dishes (sweet or savor) or to thicken
sauces and gravies.
FORCED AIR
For cooking different foods that require the same cooking temperature on
several shelves (maximum three) at the same time. This function can be used to
cook different foods without odors being transferred from one food to another
PIZZA
For baking different types and sizes of pizza and bread. It is a good idea to
swap the position of the baking trays halfway through cooking
DAILY USE
SELECT A FUNCTION
To select a function, turn the selection knob to the symbol of the function
you require.
ACTIVATE A FUNCTION
MANUAL
Turn the selector knob to the required function. The oven light switches on.
Turn the thermostat knob clockwise to the required temperature.
At the end of cooking, to switch off the oven, turn the selection knob and the
thermostat knob to .
SMART CLEAN
To activate the “Smart Clean” cleaning function, pour 100 – 120 ml of drinking
water into the bottom of the oven, then turn all the 3 knobs (selection knob,
timer knob, thermostat knob) to icon. The function will activate automatically
and its duration is 35’
PREHEATING
Once the function has been activated, the thermostat LED light will switch on
signaling that the preheating process has begun.
At the end of this process, thermostat LED light switches off indicating that
the oven has reached the set temperature. At this point, the oven is ready to
place the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating has finished may have an adverse effect on the final cooking result.
SETTING THE TIMER
The timer knob can be used to set a cooking time of between 1 and 120 minutes.
To set cooking time, after selecting the required cooking function, turn the
knob right round in a clockwise direction and then turn it back in the
opposrection to the desired cooking duration. At the end of the set cooking
time the oven switches off and the selector remains positioned at . To use the
oven in manual mode, i.e. without setting a cooking time, be sure that the
timer knob is turned to the symbol
.
RECIPE| FUNCTION| PREHEAT| TEMPERATURE (°C)| DURATION (MIN)| LEVEL AND
ACCESSORIES
---|---|---|---|---|---
Leavened cakes| | Yes| 150 – 170| 30 – 90| 2
| Yes| 160 – 180| 30 – 90| 4 1
Biscuits / tartlets| | Yes| 160 – 180| 15 – 35| 2 / 3
| Yes| 150 – 170| 20 – 45| 4 2
Pizza / bread| | Yes| 90| 140 – 200| 4 2
| Yes| 90| 140 – 200| 5 3 1
Lasagne / baked pasta / cannelloni / flans| | Yes| 180 – 200| 35 – 50| 5 3 1
Lamb / veal / beef / 1 kg| | Yes| 190 – 20| 20 – 30| 2
Chicken / rabbit / duck 1 kg| | Yes| 200 – 230| 50 – 10| 5 3 1
Toasted bread| | 5’| 250| 2 – 6| 5
Roast potatoes| | –| 200 – 220| 35 – 55 *| 3
- Turn food two-thirds of the way through cooking (if necessary).
ACCESSORIES
-
Rack
-
Baking dish or baking tray on the wire shelf
-
Drip tray / Dessert tray / Baking tray on wire shelf
-
Drip tray
-
Drip tray with 200 ml of water
-
BAKING TRA
FUNCTIONS
-
Conventional
-
Grill
-
Turbo Grill
-
Forced Air
-
Convection Bake
-
Pizza
CLEANING AND MAINTENANCE
Make sure that the oven has cooled down before carrying out any maintenance or cleaning. Do not use steam cleaners. Do not use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could damage the surfaces of the appliance. Wear protective gloves. The oven must be disconnected from the mains before carrying out any kind of maintenance work.
EXTERIOR SURFACES
Clean surfaces with a damp microfiber cloth. If they are very dirty, add a few
drops of pH -neutral detergent. Finish off with a dry cloth. Do not use
corrosive or abrasive detergents. If any of these products inadvertently comes
into contact with the surfaces of the appliance, clean immediately with a damp
microfiber cloth.
INTERIOR SURFACES
After every use, leave the oven to cool and then clean it, preferably while it
is still warm, to remove any deposits or stains caused by food residues. To
dry any condensation that has formed as a result of cooking foods with a high
water content, leave the oven to cool completely and then wipe it with a cloth
or sponge. Activate the “Smart Clean” function for optimum cleaning of
internal surfaces (Available only on certain models). Clean the glass in the
door with a suitable liquid detergent
ACCESSORIES
Soak the accessories in a washing-up liquid solution after use, handling them
with oven gloves if they are still hot. Food residues can be removed using a
washing-up brush or a sponge
LOWER THE TOP HEATING ELEMENT (Only in some models)
The top heating element of the grill can be lowered to clean the upper panel
of the oven: Extract the heating element from its seating, then lower it. To
return the heating element to its position, lift it up, pull it slightly
towards you and make sure that the tab support is in its proper seating
REMOVING AND REFITTING THE DOOR
To remove the door, open it fully and lower the catches until they are in the
unlock position (1). Close the door as much as you can (2). Take a firm hold
of the door with both hands – do not hold it by the handle. Simply remove the
door (3) by continuing to close it while pulling it upwards (a) at the same
time until it is released from its seating (b)
Put the door to one side, resting it on a soft surface. Refit the door by moving it towards the oven, aligning the hooks of the hinges with their seating and securing the upper part onto its seating. Lower the door and then open it fully. Lower the catches into their original position: make sure that you lower them down completely. Try closing the door an check to make sure that it lines up with the control panel. If it does not, repeat the steps above.
CLEANING OF THE DOOR GLASSES
After removing the door and resting it on a soft surface with the handle
downwards, simultaneously press the two retaining clips (1) and remove the
upper edge of the door by pulling it towards you (2).
Lift and firmly hold the inner glass with both hands, remove it and place it on a soft surface before cleaning it (3)
To correctly reposition the inner glass, make sure that the “R” is visible in the left-hand corner and the clear surface (not printed) is facing up. First insert the long side of the glass indicated by “R” into the support seats, then lower it into position (4). Refit the upper edge (5): a click will indicate correct positioning. Make sure the seal is secure before refitting the door.
REPLACING THE LAMP
Disconnect the oven from the power supply, unscrew the cover from the light,
replace the bulb and screw the cover back on the light. Reconnect the oven to
the power supply. Do not use the oven until the light cover has been refitted.
Please note: Only use 25W/230 ~ V, G9 type, T300°C halogen bulbs. The bulb used in the product is specifically designed for domestic appliances and is not suitable for general room lighting within the home. Light bulbs AR available from our After-sales Service.
TROUBLESHOOTING
Policies, standard documentation and additional product information can be found by:
- Visiting our website docs.whirlpool.eu
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
For markets outside Europe :
To register your product and to receive more comprehensive local help and
support, please call the number shown on the warranty booklet specific to your
country or follow the website’s instructions on:
Australia: www.whirlpool.com.au Hong Kong: www.whirlpool.com.hk New Zealand: www.whirlpool.co.nz Singapore: www.whirlpool.com.sg South Korea: www.whirlpool.co.kr Taiwan: www.whirlpool.com.tw Vietnaww.whirlpool.com.vn
References
- Whirlpool Docs
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Singapore | Home appliances | Kitchen appliances | Electrical Appliances
- 台灣惠而浦 Whirlpool
- Trang chủ - Whirlpool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>