Ugee S640 Computer Graphics Pen Tablets User Manual
- June 15, 2024
- UGEE
Table of Contents
Ugee S640 Computer Graphics Pen Tablets
-
Connection
Please follow the quick guide that came with your pen tablet to connect your device. -
Support system
Windows 7/8/10, Mac OS X 10.10 or later Certain products support Chrome OS 88 or later, see Table 2 for details ( https://www.ugee.com/topic/onChromeOS） -
Download
Please download the corresponding driver from the UGEE official website (www.ugee.com) according to the model of the product you purchased. -
Installation
After downloading is completed, please unzip the folder and operate the “.exe” file (Windows) or “.dmg” (Mac) file, and then follow the prompts until installation is completed.
Notes:- Before installation, please temporarily close the antivirus software and firewall, as well as all opened software.
- If other drivers have been installed on the computer, please uninstall them first.
- It is recommended to restart the computer after installation is completed.
-
Introduction to Driver
After the driver is installed, connect your device to your computer, and then open the driver to start customizing your device.
Notes: This document describes all the functions of the driver, but the functions in the actual use process will vary due to different connected devices. Please refer to the device you actually used for specific functions. -
Store configuration
If you need to make the changed configuration still valid when you use it next time after exiting the driver, please click the “OK” button on the left side of the driver interface to save the settings after changing the configuration. If the settings are successfully saved, the prompt “Configuration saved successfully” will be given; otherwise, the changed configuration will be valid only when it is currently used.
Work area
Screen
If multiple monitors are used in copy mode (i.e. All monitors display the same
picture), the work area of the device will be mapped to all monitors. When the
pen moves in the work area, the cursor on all monitors will move at the same
time.
If multiple monitors are used in extended mode, it is necessary to select the
work area of the device on the driver interface to map to the corresponding
monitor.
The driver provides three modes to set the display area of the screen:
-
Set full screen: Set the screen area of the selected monitor to the maximum.
-
Set screen area: Use the mouse to manually set the display area of the screen.
Click the first position (top left) of the display area of the screen with the mouse, and then click the second position (bottom right). -
Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W, and H to customize the size of the display area of the screen, or use the mouse to drag on the screen icon of the driver interface to adjust the display area of the screen.
Show display number:
Identify all connected monitors and numeric identifiers will be displayed in
the lower left corner of each monitor.
Pen tablet / Pen display
Set any part of the work area of the device to be mapped as the display area
of the screen. The driver provides four modes for selection:
- Full tablet area : Maximize the work area of the device.
- Tablet proportion : Scale the work area of the device and your screen in equal proportions.
- Set tablet area: Use the stylus to click the “upper left corner” position and the “lower right corner” position on the pen tablet to select the working area of the device. (4) Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W, and H to determine the size of the work area of the device, or use the stylus to drag on the device icon on the driver interface to set the size of the work area.
- Rotation setting:
You may set the device to 0°, 90°, 180° & 270°. After finishing the settings, you also need to rotate the device to the corresponding direction. Left-handed mode: Rotating 180°.
Application
After selecting the application, set the function you want for this application.
- Click the “+” on the top right of the application bar to open the application selection interface.
- Select the software to be added from the running program or click the “browse” button to add from the installed software; after the application is selected, the path of the selected application will be displayed at the bottom.
- Click the “OK” button at the bottom of the interface, and the application just selected will be added to the application bar.
Pen settings
-
Pen keys:
Set functions of the pen keys here. You may click the drop-down menu to use “Customize” to do so.
Notes:
When the pen is within the working range of the device, singly click the key to switch the pen or eraser mode. After switching the mode, the current mode will be displayed at the bottom of your screen.
Selecting “Use mouse control” and “input from keyboard” in the “customize” function allows you to customize the functions of the combination key. -
Use mouse control:
You may configure mouse controls and keyboard keys here. With the “Shift” and “Left click” selected, shortcut actions are enabled in software that supports such combination keys.
-
Input from the keyboard:
You may configure keyboard shortcuts here, for example, set it as Alt+A in 3D MAX software, and the alignment tool can be used.
You may set multiple sets of keyboard shortcuts here. When you press the button on the pen, all the shortcut functions you set will run again.
The functions displayed in the red box will be different on different devices.
-
Precision mode:
Precision mode is to limit the work area of the device to a small area. This function may allow you to make more detailed drawings for some areas.
-
Pressure adjustment：
The sensitivity of pressure can be adjusted by adjusting the“output” and“pen pressure” curves or moving the slider on the progress bar. Current pressure can test your current pen pressure.
-
Mouse mode：
The mouse uses the absolute mode by default. Check this to use the relative mode. After selecting it, you can adjust the speed of the cursor.- Absolute coordinate (pen mode): This is the standard freehand drawing mode. Absolute coordinate is to scale down the display area of your screen to the work area of the tablet/display.
- Relative coordinate (mouse mode): The operation method of this mode is the same as that of a normal mouse.
-
Windows Ink：
Some drawing software can support Windows Ink pen pressure, and you can select or cancel “Windows Ink” to open or close this function.
Shortcut keys
To use the shortcut key of the device, set the input method to English mode.
Setting to another mode may not function correctly.
The shortcut key of the device is the command key of Photoshop as the default
value.
You can customize shortcut keys according to your personal needs, different
devices have a different number of shortcut keys.
If the device has a roller or a touch, it is recommended that you set one of
the shortcut keys to the “Switch Ring function”(if applicable), to switch the
roller or touch control function.
Customize shortcut keys:
Select “customize” from the drop-down menu to customize the function of each
shortcut key. The setting steps are the same as those of pen keys (see 3. Pen
settings).
Roller / Touch
Roller
Select the function you want to use from the default four groups of functions.
You can customize or set this function to have no effect.
Customize：
In the custom settings, you can set KL and KR to corresponding key
combinations and use custom naming.
Settings
-
Disable shortcut keys:
Disable functions of all shortcut keys. -
Disable message:
When using the shortcut keys, no prompt message will be displayed at the bottom of the screen. -
Disable pressure:
You will not feel the pressure of the stylus when using the stylus. -
Disable tilt:
Disable the tilt effect of the stylus. -
Diagnostic tool:
When there is any problem during your use of the driver, you can use a diagnostic tool. -
Import & Export config:
You can import and export the configured shortcut keys and other functions to store and read their settings.
Notes:
When you need to import & export the changed functions, please click the “OK”
button on the left side of the driver interface first to save the
configuration.
If you have any questions, please contact us at Website :
www.ugee.com
Email : service@ugee.com
FAQs
Question: Does the Ugee S640 offer good value for its price?
Answer: Yes, the Ugee S640 is considered to offer good value for its price, providing essential features and performance for digital artists and graphic designers on a budget.
Question: What is the price range of the Ugee S640?
Answer: The price of the Ugee S640 typically falls in the budget-friendly range, making it a cost-effective option for aspiring digital artists.
Question: Can I use the Ugee S640 for tasks other than digital art?
Answer: Yes, you can use the Ugee S640 for tasks like photo editing, document annotation, and handwriting recognition.
Question: Does the Ugee S640 have customizable shortcut buttons?
Answer: No, the Ugee S640 does not have customizable shortcut buttons on the tablet itself, but you can customize shortcut keys in your drawing software.
Question: What type of connectivity options does the Ugee S640 offer?
Answer: The Ugee S640 connects to your computer via USB, providing a reliable and fast connection for your digital artwork.
Question: Does the Ugee S640 require any additional drivers to function?
Answer: Yes, you will need to install the Ugee drivers on your computer to ensure full compatibility and functionality of the Ugee S640.
Question: Does the Ugee S640 support left-handed users?
Answer: Yes, the Ugee S640 is designed to be ambidextrous and can be used comfortably by both left-handed and right-handed users.
Question: Is the Ugee S640 compatible with popular design software?
Answer: Yes, the Ugee S640 is compatible with a wide range of design and art software, including Adobe Photoshop, Illustrator, Corel Painter, and more.
Question: Does the Ugee S640 come with a stylus or pen?
Answer: Yes, the Ugee S640 comes with a battery-free stylus that supports 8192 levels of pressure sensitivity for precise drawing and sketching.
Question: What is the resolution of the Ugee S640?
Answer: The Ugee S640 has a resolution of 5080 LPI (Lines Per Inch), providing precise and detailed input for your digital artwork.
Question: What are the key features of the Ugee S640?
Answer: The Ugee S640 features a 6 x 4-inch drawing area, 8192 levels of pressure sensitivity, and compatibility with Windows and macOS operating systems.
Question: What is the Ugee S640 Computer Graphics Pen Tablet?
Answer: The Ugee S640 is a computer graphics pen tablet designed for digital artists and graphic designers to create digital artwork and illustrations.
Video- UGEE Drawing Tablet S640 Portable
Download This Manual PDF:Ugee S640 Computer Graphics Pen Tablets User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>