CLEVAST CL-HD01 Smart Humidifier User Manual

: June 13, 2024
: CLEVAST

Table of Contents

IMPORTANT SAFEGUARDS
GETTING TO KNOW YOUR SMART HUMIDIFIER
BEFORE FIRST USE
OPERATING INSTRUCTIONS
CARE & MAINTENANCE
TROUBLESHOOTING
FCC STATEMENT
WARRANTY INFORMATION
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction Manual
Smart Humidiﬁer
Model No.: CL-HD01

Read this manual thoroughly before using and save it for future reference

IMPORTANT SAFEGUARDS

GENERAL SAFETY

Only use the humidiﬁer as described in this manual.
When not in use for an extended period, turn the humidiﬁer oﬀ and disconnect the plug from the outlet.
Do not use the humidiﬁer in wet environments.
Keep the humidiﬁer out of reach from children.
Do not attempt to disassemble the humidiﬁer or its components.
Always unplug the humidiﬁer from power before cleaning it or detaching the water tank from the humidiﬁer base.
Always place the humidiﬁer on a ﬂat, horizontal surface before using.
Only ﬁll the water tank with clean water. Never, never water tank with any other liquids.
Do not place the humidiﬁer near heat sources such as stovetops, ovens, or radiators.
Do not place the humidiﬁer directly on carpets or rugs.
Do not use non-Clevast humidiﬁer parts as replacement parts for this product.
Do not cover the nozzle while the humidiﬁer is on, as this may damage the humidiﬁer.
Do not immerse the humidiﬁer base, power cord, or power plug in water.
If the humidiﬁer is damaged or is not functioning properly, stop using it and contact
Customer Support immediately.
The excess of moisture may wet the surface where the humidiﬁer is placed.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁed persons in order to avoid a hazard.
Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
Do not permit the area around the humidiﬁer to become damp or wet. If dampness occurs, turn the output of the humidiﬁer down. If the humidiﬁer output volume cannot be turned down, use the humidiﬁer intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp. Never leave water in the reservoir when the appliance is not in use.
Empty and clean the humidiﬁer before storage. Clean the humidiﬁer before next use.
Not for commercial use. Household use only.
Empty the tank and reﬁll every third day. Before reﬁlling, clean it with fresh tap water or cleaning agents. Remove any scale, deposits, or ﬁlm that has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
To reduce the risk of ﬁre, electric shock, or other injury, always follow all instructions and safety guidelines.
APP currently does not support 5G network, please use 2.4G network for operation.

POWER CORD & PLUG

Ensure that the plug ﬁts properly into a polarized outlet.
Do not handle the power cord or plug with wet hands. Keep the power cord and plug away from liquids.
The humidiﬁer has a polarized plug (one prong is wider than the other), which ﬁts into a polarized outlet in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not ﬁt, reverse the plug to the correct orientation. If it still does not ﬁt, do not bypass this safety feature and try forcing the plug into the outlet; instead, do not use it with the outlet.
Unplug the appliance during ﬁlling and cleaning.

LEAKS
Do not add essential oils, supplemental water treatment liquids, or water ﬁlters into the water tank or base chamber, as this may damage the humidiﬁer and cause leaks.
Only add essential oils to the aroma pad.
WARNING:
Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned
properly every 3 days. Clean the water tank every three days.
Clean the water tank every 3 days

GETTING TO KNOW YOUR SMART HUMIDIFIER

PRODUCT FEATURES
From the user’s standpoint, this humidiﬁer utilizes a method that enables water to be added to the upper cover, providing convenience during the process of replenishing water. The upper cover can be eﬀortlessly detached, facilitating hassle-free reﬁlling. Furthermore, it incorporates smart control features with a built-in Wi-Fi, allowing for seamless integration with the Cleats app. Through the app, users can remotely control the device, set automatic on/oﬀ functions based on desired humidity levels, and monitor changes in air humidity data. Importantly, it is equipped with an independent aromatherapy essential oil box, eﬀectively preventing water tank contamination issues.
PRODUCT DIAGRAM
1. Fog Outlet| 6. Wi-Fi Indicator Light
---|---
2. Water Tank Cover| 7. Power Switch
3. Water Tank| 8. Wi-Fi Switch
4. Base| 9. Aroma Box
5. Gear Button| 10. Power Cord and Plug
TOUCH CONTROL PANEL
| Power Switch| Press once: Power on Press again: Shut down, the light goes off and the humidiﬁer stops working
---|---|---
| Wi-Fi Switch| Wi-Fi connection: Press and hold for 3s to enter into pairing mode. The Wi-Fi indicator light will start ﬂashing blue. Open the Cleats app from your smartphone and follow the instructions to connect it to the wireless network. Once connected, the light will stay solid blue. Oﬄine/unbinding status: Wi-Fi indicator light is ﬂashing blue slowly.
Network pairing status: Wi-Fi indicator light is ﬂashing blue quickly.
| Gear Button| Press 1 time: Small gear, gear indicator light orange-pink, 15 seconds after no operation, light go out.
Press the second time: Large gear, gear indicator light grass green, 15 seconds after no operation, light go out.
Lack of water: The gear button ﬂashes red light and humidifying will be resumed by adding water within 40 seconds. If it’s not reﬁlled with water in 40 seconds, the unit will beep three times then shuts down.
OTHER FUNCTIONS
WATER SHORTAGE FUNCTION:
• Unit will stop humidifying when it is running out of water and fan will stop working after 5 seconds. The gear indicator light will start to ﬂash red and operation will resume when adding water within 40 seconds. If it’s not reﬁlled with water in 40 seconds, the unit will beep three times then shuts down.
ANTI-DRY BURN FUNCTION:
• If the “water level ﬂoat” is stuck or the “water level plate” is not functioning and there is no water in the tank, the unit will enter into anti- dry mode automatically and the unit will beep three times before shutting down.
VOICE CONTROL:
Users can control the unit through voice command via Google Assistant and Amazon Alexa.
PACKAGE INCLUSION
1 x Smart Humidiﬁer 1
1 x Warranty Card 1
1 x Power Cord 1d
1 x Share Card
1 x User Manual
SPECIFICATIONS****

Model No.:	CL-HD01
Rated Power：	H: 32W±10%

L: 21W±10%
Humidiﬁcation：| H: 200ml / h±20%
L: 100ml / h±20%
Product Size：| φ7.2611.81in / φ18.4530cm
Weight：| 2.87lb / 1.3kg

BEFORE FIRST USE

Remove all packaging.
Take the water tank oﬀ of the base and remove all tape, including any tape on the ﬂoat.
Rinse and reassemble all parts before ﬁrst use.
Place the humidiﬁer on a hard, ﬂat surface and should have at least 12 inches/30cm clearance on all sides. The surface must be water-resistant.
Mist should be directed away from walls, furniture, bedding, and appliances.

OPERATING INSTRUCTIONS

OPERATION
FILL WITH WATER
1. Make sure unit is unplugged. Add water to the humidiﬁer by either a or b. a. Removing the top cap and adding water directly to the tank.b. Removing the top cap and taking the water tank oﬀ of the unit base and then ﬁlling the water tank with water before returning it to the base.

NOTE:

We recommend using puriﬁed or distilled water to ﬁll the tank.
Do not ﬁll past the tank’s max water line.

2. Add aromatherapy to the humidiﬁer.
Do not add essential oils directly into the humidiﬁer. Only add essential oils to the aroma box.

CLEVAST CL-HD01 Smart Humidifier - tank1 3. Reattach the water tank cover and place the tank back on the base. USING YOUR SMART HUMIDIFIER
Note: Besides the on-device buttons, Cleats App can also be used to control the below functions.
Functions & Controls:

Plug the humidiﬁer into power. Press the power switch once to start the humidiﬁer.
Press the gear button to conﬁrm the working status.
Press 1 time: small gear, gear indicator light orange-pink, 15 seconds after no operation, light go out.
Press the second time: large gear, gear indicator light grass green, 15 seconds after no operation, light go out.
Turn on Wi-Fi switch and use the Wi-Fi function to control the humidiﬁer.

CLEVAST APP SETUP
Due to ongoing updates and improvements, Clevast Home App may be slightly diﬀerent than shown in the manual. In case of any diﬀerences, follow the in- app instructions.
DOWNLOADING THE FREE MOBILE APP
To download the Clevast App, please scan the QR code or search for “Clevast” in Apple App Store® (iOS) or Google Play Store(Android).

https://cloud.clevast.com/h5/download/index.html

NOTE:

Choose” Allow” for the permissions requested when opening Clevast App for the ﬁrst time. These permissions allow the App’s featu res to function normally and are not used to record personal, private information.
You can use the Clevast App to connect your smart humidiﬁer to Amazon Alexa or Google Assistant. Follow the in-App instructions to connect to your voice assistant.
Clevast App is being continually updated and App features will be expanded.

CREATE / LOGIN YOUR OWN CLEVAST ACCOUNT
Open the Cleats app. If you already have an account tap Log In. To create a new account, tap Sign Up.
Note: You must create your own Cleats account to use third-party services and products. These will not work with a guest account. With a Clevast account, you can also allow your family and friends to control your Smart humidiﬁer.

Turn on your smartphone’s Wi-Fi.
Open the Cleats App, please create a new account ﬁrst, tap Sign up.
Note: You must create your own Cleats account to use third-party services and products.
These will not work with a guest account. With a Cleats account, you can also allow your family and friends to control your Smart Humidiﬁer.
Touch the device icon and follow the in-app instructions to complete the pairing process.

PAIRING WITH CLEVAST APP

Turn on Wi-Fi ( ) on your phone.
Distribution mode: After pressing the power button, press and hold the Wi-Fi button for 3s until the Wi-Fi indicator ﬂashes blue quickly, indicating that it has entered the distribution network state. Click Add Device “E03-HD01-WTUS”.
Select Wi-Fi ( ) , enter your Wi-Fi ( ) password, and check the box “my Wi-Fi does require a password” then click connect. It will initiate the networking and Wi-Fi connection will be established.
3.1 Choose Wi-Fi ( )3.2 Enter password3.3 Click connect3.4 Start networking.3.5 Wi-Fi ( ) successfully connected.3.6 Device Name.

APP FUNCTION INTERFACE
APP interface：

CLEVAST CL-HD01 Smart Humidifier - App8

CARE & MAINTENANCE

CLEANING THE HUMIDIFIER
The humidiﬁer should be cleaned after a week of use or before being stored away.
CLEANING STEPS

Unplug the humidiﬁer.
Remove and rinse the water tank cover.
Remove the water tank from the base and pour out any water from the tank and base chamber.
Rinse the tank and base chamber with room temperature water.

DESCALING THE HUMIDIFIFIER

Fill the tank with 3 cups/ 710 ml of distilled white vinegar.
Put the tank cover on and swish the vinegar around the tank.
Place the tank on the base and soak for 15‒20 minutes. Vinegar will drain into the base chamber and loosen scale (mineral buildup) in the tank and in the base chamber (including the transducer and ﬂoat).
Remove the tank, remove the tank cover, and pour out all vinegar.
Use a soft cloth and the included cleaning brush to remove scale from all parts.
Rinse all parts until the vinegar smell is completely gone.
Dry all parts with a cloth. Make sure all parts are completely dry before reassembling or storing.

CLEANING THE AROMA PAD

Pull out the aroma box from the back of the base.
Remove the aroma box and rinse under warm running water.
Dry with a clean cloth and place it back into the aroma box.
Note: Do not pour liquid cleaners or detergents into the aroma p ad or box.

STORING
Follow the cleaning instructions and allow all parts to dry completely before storing. Store the humidiﬁer in a cool, dry place.

TROUBLESHOOTING

The troubleshooting section below is for solving frequently asked questions for the humidiﬁer. If your problem persists, please contact customer support.
FOR SMART HUMIDIFIER

Problem	Possible Solution
Humidiﬁer doesn’t turn on.	Make sure the power cable is securely connected

and press the Power Button again.
Add at least 1L of puriﬁed or distilled water into the water tank.
Few or no mist comes out.| Turn the mist level to a higher setting.
There may be too much water in the base chamber. Empty the base chamber and reﬁll the water tank (not the base chamber)and place the water tank properly onto the base.
Make sure the air inlet on the bottom of the base is not blocked. The humidiﬁer should not be set on carpet or other surfaces that may block the air inlet.
Make sure the nozzle is not blocked or clogged.
The water temperature may be too low. Turn the mist level to the highest setting and let the humidiﬁer run for a while, then adjust to the desired setting.
The water temperature may be too low. Use room temperature water.
If the water tank or base was washed with detergent, rinse thoroughly with clean water to remove any detergent.
The water usage of the humidiﬁer is too fast.| The humidiﬁer uses up water based on the environmental temperature and humidity. If your environment is cold and/or dry, the humidiﬁer will run out of water faster.
Humidiﬁer produces an unusual smell.| If the humidiﬁer is new, unplug and rinse all parts, then place in a cool dry place for 12 hours.
If essential oils were placed on the aroma pad, rinse the pad using clean water and allow it to dry.
EAN the water tank and base chamber.
Problem| Possible Solution
---|---
Humidiﬁer makes a loud or unusual noise.| Set the mist level to a lower setting.
The humidiﬁer may be malfunctioning. Stop using the humidiﬁer

and contact Cleats Customer Support.

White dust appears around the hemidine.| We recommend using puriﬁed or distilled water to ﬁll the humidiﬁer. Avoid using water with high mineral content.
Water leaks from the humidiﬁer.| Make sure the silicone sealing ring around the water outlet valve is secure.
Avoid running the humidiﬁer in a room with over 60% relative humidity.
Do not shake the humidiﬁer.
Make sure to place the humidiﬁer on a ﬂat, level surface.
Check the water tank for leaks. lf there are leaks, contact Cleats Customer Support.
Make sure the ﬂoat in the tank is in place and is correctly installed.
Condensation forms around humidiﬁer or windows.| Humidity may be too high. Turn down the mist level, turn off the humidiﬁer, or open a door or window to the room.
Mold grows inside the humidiﬁer.| Clean the water tank and base chamber regularly.
Indicator light blinks red or bright red.| Fill the water tank.
Place the water tank properly on the base.
Essential oil has little or no smell.| Add more essential oil. For best results, use pure essential oil.
Only a little humidiﬁcation effect.| The room may be larger than the humidiﬁer’s effective range. Use in a room smaller than 250 ft2.

FOR APP & CONNECTIVITY

Cannot connect to the Clevast App.
• Make sure your smartphone is enabled and your smartphone is not connected with other devices.
• Enable the smartphone’ s Location Services.
• Try connecting with another smartphone.
• Make sure your app is the latest version.
• Make sure your smartphone is connected to the 2.4GHz network, and conﬁrm the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• Shorten the distance between the humidiﬁer, Wi-Fi router, and the smartphone.
• Make sure your humidiﬁer and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).
• If you are using a VPN, try turning it oﬀ and then try it again. Disable portal authentication for your wireless network. If portal authentication is enabled, this humidiﬁer will not be able to access your wireless network and setup will fail. Portal authentication means that you need to sign in to your wireless network through a web page before you can use the Internet.
Cannot ﬁnd the humidiﬁer within the nearby devices list.
• The humidiﬁer may be connected with another smartphone. Disconnect it from the other smartphone ﬁrst.
The humidiﬁer is oﬄine.
• Make sure the humidiﬁer is plugged in and powered on, then refresh “My Devices” in the Cleats app by swiping down on the screen.
• Make sure your router is connected to the internet, and your phone’s network connection is working.
• If the Wi-Fi password has been changed, the humidiﬁer will automatically go oﬄine. Try connecting it to the network again.
• Delete the oﬄine humidiﬁer from the Cleats App, then add and reconﬁgure the humidiﬁer again in the Cleats App.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the speciﬁc operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The availability of some speciﬁc channels and/or operational frequency bands are country dependent and are ﬁrmware programmed at the factory to match the intended destination. The ﬁrmware setting is not accessible by the end user.

WARRANTY INFORMATION

We grant 1 year warranty on the product commencing on the date of purchase. Within the guarantee period, we will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact us at: support@clevast.com to launch a warranty claim.
This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible eﬀect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.

CUSTOMER SUPPORT

If you have any product questions or concerns, please don’t hesitate to contact us directly at support@clevast.com or visit our website at: www.clevast.com.
We have a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.