ignition 486339 LED Strip User Manual

June 15, 2024
ignition

ignition 486339 LED Strip

Specifications

  • Stagepix Line 100 IP (item no. 486339): LED line light with 80 SMD LEDs (RGB) in 40 segments
  • Stagepix Line 50 IP (item no. 486342): LED line light with 40 SMD LEDs (RGB) in 20 segments
  • Control via Stagepix Brain IP (item no. 486345), not included
  • Flexibility due to interchangeable light diffusers
  • Connection of several LED strips with a clamping mechanism
  • Robust aluminium housing
  • Including black frosted cover
  • Also ideal for outdoor events due to IP65 rating

Product Usage Instructions

Safety Instructions

This device is intended for use as a lighting effect in connection with a Stagepix Brain IP controller. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the operating life of the device by taking regular breaks and avoiding frequent switching on and off. The device is not suitable for continuous operation.

Features

  • Stagepix Line 100 IP: LED line light with 80 SMD LEDs (RGB) in 40 segments
  • Stagepix Line 50 IP: LED line light with 40 SMD LEDs (RGB) in 20 segments
  • Control via Stagepix Brain IP (not included)
  • Flexibility due to interchangeable light diffusers
  • Connection of several LED strips with a clamping mechanism
  • Robust aluminium housing
  • Including black frosted cover
  • Also ideal for outdoor events due to IP65 rating

Tips for Extending the Service Life

For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.

FAQ

Q: Can the LED strips be used without the Stagepix Brain IP controller?
A: No, the LED strips require the Stagepix Brain IP controller for operation.

Q: Can multiple LED strips be connected together?
A: Yes, multiple LED strips can be connected using the clamping mechanism.

Q: Is the device suitable for continuous operation?
A: No, the device is not suitable for continuous operation. It is recommended to take regular breaks and avoid frequent switching on and off.

Q: Does the device come with a black frosted cover?
A: Yes, the device includes a black frosted cover.

Q: Can the LED strips be used for outdoor events?
A: Yes, the LED strips are ideal for outdoor events due to their IP65 rating.

General information

This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference.
Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document.
Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.

Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are used in this document.

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or serious injury if it is not avoided.
WARNING!| This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
|
Warning signs| Type of danger
| Warning – high-voltage.
| Warning – suspended load.
| Warning – danger zone.

Safety instructions

Intended use

This device is intended for use as a lighting effect in connection with a Stagepix Brain IP (item no. 486345) controller. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation.

Safety

DANGER!

  • Risk of injury and choking hazard for children!
    Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision.
    Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with.

  • Danger to life due to electric current!
    Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged.

NOTICE!

  • Risk of fire due to covered vents and neighbouring heat sources!
    If the vents of the device are covered or the device is operated in the immediate vicinity of other heat sources, the device can overheat and burst into flames. Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames.

  • Property damage due to incompatible accessories.
    Using incompatible accessories may damage the device. Only use the device together with the Ignition Stagepix Brain IP (item no.486345).

Features

  • Stagepix Line 100 IP (item no. 486339): LED line light with 80 SMD LEDs (RGB) in 40 segments
  • Stagepix Line 50 IP (item no. 486342): LED line light with 40 SMD LEDs (RGB) in 20 segments
  • Control via Stagepix Brain IP (item no. 486345), not included.
  • Flexibility due to interchangeable light diffusers
  • Connection of several LED strips with a clamping mechanism
  • Robust aluminium housing
  • Including black frosted cover
  • Also ideal for outdoor events due to IP65

For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminates by providing adequate ventilation and operating the LEDs with the lowest possible brightness.

Information about protection class IP65

Equipment with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against splash water from any angle (second code digit). That is why this equipment can also be used outdoors. Event technology equipment is generally only designed for temporary use however (event lighting) and not for permanent use outdoors.

The specified protection class does not make a statement about the weather resistance of the equipment (resistance to changing ambient conditions as well as against the effects of sunlight and UV rays).
The seals and screw connections of the equipment must be checked regularly to ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due time.

Installation and starting up

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.

WARNING!

  • Risk of injury from falling devices that were inadequately secured!
  • If devices are not properly secured during assembly, they can cause severe injury and considerable damage by falling.
  • When installing and operating, make sure to follow the standards and regulations that apply in your country.
  • Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.

NOTICE!

  • Risk of overheating and fire due to inadequate distance and bad ventilation!
  • If the distance between the light source and the illuminated surface is too short or the device is badly ventilated, the device can overheat and cause fires.
  • Make sure that illuminated surfaces are more than 2 m away.
  • Do not operate the device in ambient temperatures above 40 °C.
  • Always ensure sufficient ventilation at the operating location.

Mounting options

You can install the unit in a suspended position. When in use, the device must always beattached to a solid surface or an approved mount. Use the designated mounts for omega brackets on the retaining bracket for fastening.
Always work from a stable platform whenever installing, moving or servicing the device. While you do this, the area underneath the device must be cordoned off.

Cable connections

Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.

Connect the device via a suitable RJ45 data cable (Cat) to the Stagepix Brain IP (item no.
486345). A maximum of four Ignition Stagepix Line 100 IP LED strips (item no. 486339) or a maximum of eight Ignition Stagepix Line 50 IP LED strips (item no. 486342) can be connected in series to each serial interface of the controller.

Please note that this device must not be connected to a dimmer.

Connections and controls

Stagepix Line 100 IP
(item no. 486339)

ignition-486339-LED-Strip-FIG- \(4\)

Stagepix Line 50 IP
(item no. 486342)

ignition-486339-LED-Strip-FIG- \(5\)

  1. Fastening element for the mechanical connection of two pixel rails using a clamping mechanism
  2. [INPUT] | RJ45 input for power supply and control of the device by means of Stagepix Brain IP (item no. 486345)
  3. Retaining bracket for attaching the device to a suitable truss bar
  4. [OUTPUT] | RJ45 output for power supply and control of the following pixel strip
  5. Safety eyelets and connector for seamless connection of multiple bars

Technical specifications

Light source| Stagepix Line 100 IP: 80 × 5050 SMD, RGB

Stagepix Line 50 IP: 40 × 5050 SMD, RGB

---|---
Optical properties| Beam angle| 120°
Pixel pitch| 25 mm
Luminance| 1050 Nit
Refresh rate| 3000 Hz
Control| Via Stagepix Brain IP (item no. 486345)
Input connections| Power supply| RJ45
Control via Stagepix Brain IP| RJ45
Output connections| Power supply| RJ45
Control of further LED strips| RJ45
International Protection Rating| IP65
Mounting options| Suspended
Dimensions (W × H × D)| Stagepix Line 100 IP: 101 mm × 85 mm × 36 mm

Stagepix Line 50 IP: 51 mm × 85 mm × 36 mm

Weight| Stagepix Line 100 IP: 1.9 kg

Stagepix Line 50 IP: 1.0 kg

---|---
Ambient conditions| Temperature range| 0 °C…40 °C
Relative humidity| 20%…80% (non-condensing)

Further information

Suitable for outdoor use Yes
Colour mixture RGB
Separately controllable LEDs Yes
LED type Xin1
Fanless Yes
Remote control Not possible
Wireless DMX No
Housing colour Black

Cleaning

Device components

Clean the device components that are accessible from the outside regularly. The cleaning frequency depends on the operating environment: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the device components.

  • Clean with a dry soft cloth.
  • Stubborn dirt can be removed with a slightly dampened cloth.
  • Never use solvents or alcohol for cleaning.

Protecting the environment

Disposal of the packaging material

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals