ENLENCE B07Z4T6X59 8GB Digital Voice Recorder Instructions

ENLENCE Recorder Instruction

B07Z4T6X59 8GB Digital Voice Recorder

Please read the manual before using it.

Statement:

1. First, thanks for using our company’s digital products!
2. Please read the manual before using for the proper use of it.
3. As for the information, please back up on your own. Our company takes no responsibility to any loss of data caused by abnormal operation of software, hardware, or product repair, or battery changing, or other accidents, also the loss caused indirectly by these reasons. Meanwhile, we also can’t control the possible misunderstanding of the manual from the customer. Thus, our company won’t take charge of accidental damage caused by using this manual, also the third party’s claim for compensation caused by using this manual.( The product system will occur some part of the memory, so it’s normal if there’s any difference with the standard memory)

Note:

1. Do not attempt to open, repair or modify the product.
2. Do not use this product in the region with prohibited use sign of electronic products (such as airplane, etc).
3. Do not swallow the product or accessories.
4. Do not put the product into water or other liquids.
5. Do not use this product in extremely cold, hot, humid or dusty environments.

Warnings:

1. Do not drop the product for avoiding malfunctions.
2. Do not keep the product under the bright light or heat for extending the life span of the product itself.
3. If you do not use it for a long time, please charge it occasionally to prevent damage to the battery.
4. Do not use it when charging to expand the life span of the battery.
5. Please do not force to remove or waggle up and down, side to side to connect accessories (For example: headphone, microphone, USB connection, etc.).
6. This machine is a learning tool and we are not responsible for any legal liability caused by economic or commercial use.
7. Do not use in environments above 60°C (e.g. sauna, car).
8. If there is important information in the product memory, back it up in time. We are not responsible for any loss of data that occurs while using this product or service.
9. Please note that this product is prohibited for illegal use. For example: for the privacy of others or eavesdropping.

Product description of each part:

1：DEL/A-B
2：VOL+
3：VOL-
4：USB/Charging port
5：Line-in
6：Recording key
7：Rope Hole
8：Earphone output
9：Recording LED| 10：Led display
11：SOTP/GET BACK
12：PLAY/Time out
13：Loudspeakers
14：Menu key
15：UP/Fast-forward
16：DOWN/Quick replay
17：Power switch
---|---

Special keypad instructions

The words“short press”and“long press”often appear in this paper，The meanings are as follows：

1. Short press: Press and hold the button for less than 2 seconds.
2. Long press: Press and hold the button for more than 2 seconds.until the appropriate display appears.

Note: When the machine is switched on and not used for a period of time, it will automatically go into soft shutdown state. (Shutdown time can be set in the system settings)

Turn on the power

1. Put the power switch to ON.
2. In soft shutdown state, long press “PLAY” for 3 seconds to turn on the machine.

Turn off the power

1. Put the power switch to OFF.
2. Long press “PLAY” for 3 seconds to turn off the machine. This can only turn off the working state, not turn off the power. If no use in a long period, please put the power switch to “OFF” to turn off the power.

※Suggestion: Please stop the machine by “PLAY/PAUSE ” , then turn off the power by “OFF”. If turn off the power directly, it will reset to defaults. Recording

1. Start Recording ：Press “REC” for a short time after booting，The recording indicator on the screen displays the appropriate identification，The recording indicator is always on，Record the number at the top of the screen and start the clock，That means it’s in recording mode.
2. Recording pause ：Short Press “REC” or “PLAY” to pause recording，The recording indicator blinks，At the top of the screen the number stops recording the time record. And Short Press “REC” or “PLAY” again to cancel the pause.
3. Stop/save the recording ：During recording, simply press the “Save” button，The screen shows “saved…” and then enters the play standby state。Short Press “PLAY” to play the current recording.

PlAY/PAUSE
In standby mode, press the “PLAY” button to start playing，Press the “PLAY” button again briefly to pause the playback，Short press the “SAVE” button to stop playing and return to the parent menu.
Change the play file
During playback，Short Press “UP” or “DOWN” to switch play files.
Music/recording mode conversion
Simply press the “SAVE” button to return to the main menu in the playback state, Short press the “UP” or “DOWN” button to select “Music” or “Recordings”, Short Press “PLAY” to enter，Press “PLAY” again to confirm the play.
Adjust the volume
While it’s playing，Short press the “VOL+” or “VOL-” button to adjust the volume level，The volume indicator bar on the display will indicate the addition and subtraction of the volume，Once the adjustment is complete. Then short press the “PLAY” button to save the exit volume adjustment mode（5 seconds if no operation will automatically save the exit）.
UP/DOWN selection、Fast forward/fast back
While it’s playing，Simply Press “UP” or “DOWN” to select the last file or the next file to play. Long Press “UP” or “DOWN” key to fast-forward, fast-back play.
A-B Repeat
While it’s playing，Short Press “A-B”one time，Set The repeat starting point A，Then short, press“A-B”，Set The repeat read end point B，At this point the screen shows A-B，Press the “A-B” key again to repeat the playback between the two points，Press the “A-B” button again to exit the a-b repeating mode. (By default, it will automatically revert to normal after 5 replays).
Delete

1. Delete single：Simply press the“MENU” button to access the music (voice) playback interface，Then short press “UP” or “DOWN” to select “delete”，Short press the “PLAY” button to enter the delete screen，Short Press “UP” or “DOWN” to select“yes”. Then short press “PLAY” to confirm，Single file deletion complete。 As shown in figure 1
2. Delete all：In the music (voice) main interface, simply press the “PLAY” button to enter the play file list. Simply Press “UP” or “DOWN” to select delete all，Short Press “PLAY” button to enter the delete interface. Short Press “UP” or “DOWN” to select“yes”，Then short press “PLAY” to confirm，All files deleted. As shown in figure 2
3.  Abort. Delete：To abandon the deletion，Select “ No”and then press the “PLAY” button for confirmation，
   You can discard the delete and go back to the previous level，Or simply press the “SAVE” button to exit。As shown in figure 3

※ Warning：“Delete all” Operation For permanent deletion，The file will not be recovered，Please be careful about deleting files！

Record setting

When it turns on the main menu interface, Short Press “UP” or “DOWN” to select the recording settings, Short Press “PLAY” to enter，Then short press the “UP” or “DOWN” keys to select the items you want to set，Press the “SAVE” Key to return to the main menu without setting。

1. Recording format：Short Press “PLAY” to enter, Then short press “UP” or “DOWN” to select the format you want to record，（MP3 format and WAV format）Then Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select recording quality，Short Press “PLAY” to confirm saving，Press the”SAVE”Key to return to the settings menu。

2. Recording bit rate（Description parameter）：
   MP3 format（Low Quality）<32kbps,64kbps,128kbps,192kbps> WAV format（High Quality）<512kbps,768kbps,1024kbps,1536kbps，3072kbps>
   ※ The above parameters are the sampling rate of recording，The higher the number, the higher the degree of sound restoration（The closer we get to the actual sound source）.

3. Listening setup：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to turn it on or off，Then short press “PLAY” to confirm。Select “on” and insert the earphone when recording to hear the currently recorded sound（The function can also be used for hearing aid）。

4. ADC gain setting：Short Press “PLAY” to enter, Short Press “UP” or “DOWN ”to turn it on or off， Then short press “PLAY” to confirm。（This function can be used in a complex recording environment）。

5. Segmented record： Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select， Record time segment（OFF.30Min.60Min.90Min.120Min）Optional，Then short press “PLAY” to confirm。

6. Recording source：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to select， There are (microphone, line-in) sound sources available，Then short press “PLAY” to confirm（The normal recording source of the machine is the microphone channel，Use the line-in channel if you need to input a sound source for another device）。

7. Voice Control Mode：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to select the voice switch or sensitivity adjustment（Sensitivity doesn’t kick in until the voice switch is turned on）。Sensitivity adjustment is 1-5 grade adjustable(The higher the level of sensitivity, the more sensitive it is to start recording），Short Press “PLAY” to confirm。

8. Record the time settings：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to select the timing switch or record the cycle（Takes effect when the record is open at set time），Set the recording start time and end time after a short press the “PLAY” button to confirm。

9. Recording sensitivity： Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select，It’s 0-7 adjustable（In the context of a complex loop），Short Press “PLAY” to confirm。

10. Recording light switch：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to turn it on or off， Then short press “PLAY” to confirm（Set to“off”after no recording indicator light）.

System setup
In the main menu interface, press the “UP” or “DOWN” keys to select the “system settings” interface, Short Press “PLAY” to enter，Short press the “UP” or “DOWN” keys to select the options you want to set，You do not need to set the “SAVE” Key to return to the main menu。

1. Screen saver time：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to select screen saver time （10Min、20Min、30Min、ON），Short Press “PLAY” to confirm。

2. Language selection：Short Press “PLAY” to enter, Simply Press “UP” or “DOWN” to select the language you want，Short press the “PLAY” button to confirm when the selection is complete。（Available in multiple languages）

3. Display contrast adjustment：Short Press “PLAY” to enter, Short Press “VOL+”or “VOL-” to select （There are: 0-1 adjustable，Adjust when display is not clear），Short Press “PLAY” to confirm。

4. Shutdown setting：Short Press “PLAY” to enter, Short Press “UP” or “DOWN” to select shutdown time （ON、1Min、2Min、5Min、10Min），Short Press “PLAY” to confirm。

5. Date and time settings：Short Press “PLAY” to enter, Simply press the “UP” or “DOWN” keys to select the setting time and the setting date，Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select settings，Short press the“VOL+”or“VOL-”button to adjust the number，After setting up the short press the “PLAY” key to confirm。

6. Information：Short Press “PLAY” to enter，View basic machine information and disk space usage,Return to main menu in 5 seconds。

7. Password setting：Short Press “PLAY” to enter, Short press the “UP” or “DOWN” keys to select the password switch or password settings。Then Short Pres s “PLAY” to enter，Short Press “UP” or “DOWN” to select settings，Short Press “VOL+”or “VOL-” to adjust the numbers。After setting up the short press the “PLAY” key to confirm。
   ※ Close the password enter the old password directly after the input of “0000” short press “PLAY” key confirmation can close the password function。(You have already set the password, please remember, The next time you use it, you need to enter your password to turn it on。 If you forget your password, you can also type “181818”and long press “MENU” to unlock it)。

8. Go back to the factory settings: Short Press “PLAY” to enter，Short press the “UP” or “DOWN” keys to choose whether to resume factory settings, Short Press “PLAY” to confirm。
   ※ This feature will revert to the factory setting，Use with caution，The machine data will be wiped clean。

9. Format device：Short Press “PLAY” to enter，Simply press the “UP” or “DOWN” keys to select yes or no formatting devices，Short Press “PLAY” to confirm。(Use with caution，The data will be cleared after the machine is formatted）。

Play settings（Music playback and recording playback）
Simply press the “MENU” button to enter the settings menu in the playback state （ Play mode ， Repeat Settings、Equalizer、Variable Speed Playback，Bookmarks），Short press the “UP” or “DOWN” keys to select the options you want to set。

1. Play mode（Cyclic mode）：Short press the “PLAY” button to enter play mode，Short Press “UP” or “DOWN” to select（Repeat 1、Repeat all，Shuffle，preview），Short “PLAY” button to confirm。
2. Repeat Settings：Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select（Repeat mode， Replay Times，Replay Interval），Short “PLAY” button to confirm。
3. Repeat mode（Repeat reading)：There’s a description in a-b。
4. Replay Times (The number of repetitions is)：1-10 times optional，The default number of times for this machine is 5，Repeat for 5 times and then automatically switch to normal playback。
5. Replay Interval ( The repetition interval is)：1-10 seconds，Time interval can be selected as needed。
6. Sound effect settings（Equalizer）：Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select （OFF，Rock，soft，Pop，Jazz，Classical，Techno），Short Press “PLAY” to confirm。
7. Variable Speed Playback：Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to adjust，The playback speed of “8” to “-8 ” can be adjusted，Level 0 is normal speed，Short Press “PLAY” to confirm。
8. Bookmarks：Short Press “PLAY” to enter，Short Press “UP” or “DOWN” to select：Add bookmarks to bookmark your favorite music and files, Short press play to add and return to the play screen。
9. Go to bookmarks：To listen to the file you added, also select “go to bookmarks”，Short press the “PLAY” button to enter and play the file。
10. Remove bookmarks ： If you want to delete a bookmark ， Select “remove bookmark” and then press “PLAY” to confirm。

LINE-IN line recording setup（Select line-in audio source input）

1. Through the LINE-IN Portal，Selectable audio direct input record，Can Access (CD , recorder, DVD, Cell phone) and other products sound source，Press “REC”again to record。
2. External MIC recording: After connecting the external MIC through the LINE-IN interface，Same as built-in MIC recording。
3. A recording of the call: After connecting the telephone recording adapter through the LINE-IN interface, Same as built-in MIC recording。

Connect to the computer
The machine is connected to the computer via a USB cable，Available for file upload/download ， Data transfer by copy/paste（It can also be used as a flash drive）。
Note：Please remove the removable disk in the normal way. To prevent data loss。

Charging
The USB interface that connects the machine to the charger through a data cable，The charge indicator icon appears on the screen，Battery symbol to stop running when fully charged。（The charging time depends on the power of the charger，It usually fills up in about 2 hours）
※ Extend Battery Life ， When the machine was down to its last bar of electricity ， Please charge in time。

Troubleshooting

Low battery;
Memory capacity has been raised to the limit or full recording| Turn to recording state;
Timely charge:
Delete some files or move them to an external device;
Unable to open recording file| Low battery;
No recording file;
The minimum volume;| Timely charge;
Confirm documents; Adjust the volume;
Words on the screen are abnormal| The language selection correctness| Choose correct language
No sound from the speaker| Confirm that there is earphone: The minimum volume;
Check the recording format;| Remove the headset;
Adjust the volume;
Select the correct recording format:
No sound from headphones| Confirm whether the headset is connected properly:
The minimum volume;
The damaged audio or MP3 files caused the noise or no voice;| Connect the headset properly;
Adjust the volume;
Check whether audio or MP3 files are damaged, make sure the file integrity;
Unable to properly upload/download the audio file| Check whether the USB cable is damaged:  Whether USB connection is normal;
Check whether there are gaps in the memory:| Ensure that no damage of the USB connection;
Normal USB cable connection; Delete blank memory;

※ Statement: Our company won’t in charge of data missing caused by using the machine or repairing it. Therefore please back up on your own if there’s important data in the machine.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>