XARALYN Levico 120 Electric Built In Fireplace Instruction Manual

XARALYN Levico 120 Electric Built In Fireplace

Product Information

The Levico Manual is a user manual for the Levico fireplace. It provides important safeguards, instructions, and information on operating the appliance. The fireplace can be controlled using the panel on the unit or the included remote control. It features a main switch for power control, flame intensity adjustment, temperature settings, heat level control, time setting, and the option to switch between Celsius and Fahrenheit. The Levico fireplace also includes safety cut-off features and guidelines for cleaning and maintenance.

Product Usage Instructions

1. Important Safeguards: Before using the appliance, read the instructions carefully and follow the safety guidelines. Ensure that individuals who are unable to use the appliance safely are supervised by someone responsible for their safety.
2. Getting Started: Unpack the contents of the carton.
3. Operation:
   • Main Switch: Locate the main switch on the fireplace. Turn it to “I” to connect power and turn it to “O” to cut the power. A chiming sound will be heard when turning to “I”.
   • Power On/Off: Push the button once to turn on power for all functions. Push it again to turn off all functions.
   • Flame Intensity: Adjust the flame intensity by pushing the button up or down to desired levels.
   • Change Temperature: Press the button to change the temperature of the thermostat. It is recommended to set a high temperature to activate the heating settings at any time. The heater will turn off when the desired temperature is reached.
   • Heat Settings: The fireplace has a fan-forced electric heater with two heat levels. Push the button once to activate the heater at low level, push it again to activate the heater at high level. To deactivate the heater while on high level, push the button once more. The heater will only work if the thermostat is set to a higher temperature than the current room temperature. The fan will continue to run for a short time and turn off automatically after the heater is turned off.
   • Time Setting: Press the “24” key to enter the current time setting. Select the desired day of the week, confirm, and enter the current time in 24-hour format. Press to exit the time setting.
   • Change C/F: Press the “C/F” button to switch between Celsius and Fahrenheit.
   • Safety Cut-off: Ensure that the unit is unplugged from the power supply before performing any maintenance or cleaning to reduce the risk of electric shock or fire.
4. Cleaning: Follow the instructions provided in the user manual for cleaning and maintenance.
5. Protection of the Environment: Dispose of the waste electrical and electronic equipment in accordance with specific rules to protect the environment and human health. Do not dispose of the appliance as unsorted municipal waste. Bring it to a municipal collection point for proper waste recovery.

Important safeguards

Please read these instructions carefully before using the appliance, and always follow the safety and operating instructions.
Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

Please read these instructions carefully before using the appliance.

• Check that your mains voltage corresponds to that stated on the rating plate of the appliance.

• Do not leave the heater unattended during operation and keep children away.

• From time to time check the appliance for damages. Never use the appliance if cord or appliance Shows any signs of damage. In that case, repairs should be made by a competent qualified electrician. Should the cord be damaged, it must be replaced by a competent qualified electrician in order to avoid all danger.

• Only use the appliance for domestic purposes and in the way indicated in these instructions.

• Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the paragraph “Cleaning and maintenance” because water penetration through the openings can be very dangerous for your appliance.

• Never use the appliance near hot surfaces.

• Before cleaning, replacing a bulb or when you do not use the appliance, always unplug the appliance from the power supply. Do not attempt to remove the plug from the wall socket with wet hands.

• Never use the appliance outside and always place it in a dry environment.

• Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.

• Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.

• No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.

• Stand the appliance on a stable surface so that it cannot fall.

• Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance.

• Always position the heater in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its base/feet. Make sure that the air inlet and outlet openings are not blocked.

• To avoid any risk of fire, do not cover the heater (e.g. with clothes).

• The heater should only be operated at a minimum distance of 1 meter from any wall (except the wall against which it is mounted), piece of furniture or other object and combustibles.

• Warning: Do not operate the heater near baths, showers, washbasins, swimmingpools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.

• The temperature of the housing and the grids may be very high when the appliance is in use.
  Avoid contact with the skin.

• Do not allow the power cord to touch any hot part of the appliance.

• Never use the appliance near inflammable or explosive materials.

• Do not insert any objects through the grille or into the interior of the appliance.

• Do not use double adapters or other appliances to connect with heater.
  (*) Competent qualified electrician: after-sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In case of need you should return the appliance to this electrician.

Getting started

• Remove the appliance from the box.
• Remove any packaging from the product.
• Place the packaging inside the box and store in a dry place.
• Mount the fireplace. Then plug the power cord into a 230-volt earthed socket.

Contents of carton

• Fireplace.
• Remote control.
• Instruction Manual.

Operation

The fireplace can be controlled with the panel on the unit or with the included remote control.

Main Switch
The Main Switch is located on the fireplace. Turn the switch to “I” to connect power and turn the switch to “O” to cut the power. There will be chiming sound when turning to “I”.

Power on/off
Push the   button once to turn on power for all functions. Then touch the button once more to turn all functions off.

Flame intensity
Push the button to level up/down to the desired flame intensity.

Change the desired Temperature
Press the button to change the temperature of the thermostat. We recommend setting the temperature high. This way you can turn on the heating settings at any time. The heater will turn off when the desired temperature is reached.

Heat settings fireplace
This fireplace consist of a fan forced electric heater with two heat levels. Push the button once to activate the heater at low level. Push the button once more to active the heater at high level. When
set in high level, push the button once more to deactivate the heater. Heater will only work if the thermostat is set on a higher temperature than the current room temperature.

Note: The fan will continue to run for a short time and turn off automatically after the heater is turned off.

Time setting
Press the 24 key to enter the current time setting. The light of a specific day will light up and flash. Press or to select which day of the week. After the selection is complete, press 24 to confirm. Enter the current time by pressing , press 24 to confirm. After the setting is complete, press 24 to exit the time setting.

Change C/F
Press the C/F button to change from Celsius to Fahrenheit

Daily timer
Press 7 to enter the daily timer function, the timer light and setting light will flash, press to select the daily timer. The timer lights up when the weekly timer is turned on. After setting the daily timer on, press the 7 button to enter the Monday timer. Press to enter the hour setting of this day. After the hour is set, press 7 to enter the minute setting of this day. Press 7 to enter the hour of the shutdown time of this day. After the hour is set, press 7 to enter the minute of the shutdown time of this day. After the setting is completed, press 7 to enter the clock setting of the next day. Carry on until the whole week has been completed.

Open window detection
When the heating function is turned on, the indoor temperature rises. When the temperature reaches the set temperature, the product automatically remains at this temperature. If the indoor temperature is lowered by 5 °C or more within 10 minutes, and this trend is maintained or continued for 30 minutes, the product self-test system detects that a window has been opened, and the self- test system will automatically turn off the heating function.
Press and hold the key to display E0. When E0 is displayed, you can press or , to select the E0 and E1 cycles. E0 means that the window detection function is not turned on. E1 means the window detection function is turn on.

Safety cut-off

• This appliance is fitted with a safety cut-off which will operate if the fireplace heater overheats (e.g. due to blocked air vents). For safety reasons, the fireplace heater will NOT automatically reset.
• To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
  Reconnect the supply to the mains and switch on the appliance.

Cleaning

Warning: The unit must be unplugged from the power supply prior to any maintenance or cleaning in order to reduce the risk of electric shock or fire.

General cleaning instructions

• The housing may be wiped with a slightly damp, lint-free cloth. Do not use any abrasive scouring pad or steel wool.
• Do not use detergents or cleaning products.
• If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum cleaner.
  Protection of the environment – directive 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the implication of both suppliers and users. For this reason your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directions.

The warranty for your product is valid for two years from the date of purchase.

A Vreekesweid 30
1721 PR Broek op Langedijk
The Netherlands

• T +31(0)226 33 14 20
• E info@xaralyn.com
• W www.xaralyn.com

References

• Welkom bij Xaralyn | Clean Fire System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>