VEVOR LX-C9138B Pull Out Cabinet Organizer User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR LX-C9138B Pull Out Cabinet Organizer
Product Information
Specifications
- Model: LX-C9138B
- Product Size (inch):
- Top basket: 4.9×15.7×2.5
- Bottom basket: 11.5×16.5×2.5
- Loading Capacity: 28.6 lb (Max)
- Installation size (mm): 313x420x323
Assembly Precautions
Please read all manual instructions carefully before operating. VEVOR
reserves the right to interpret the user manual. The appearance of the product
may vary from the one received. Please note that you will not be notified of
any technology or software updates on our product.
Use Precautions
Parts List
| No. | Name | Parts |
|---|---|---|
| A | Glide tracks | 2 PCS |
| B | Bottom Basket | 1 PCS |
| C | Top Basket | 1 PCS |
| D | Support frame | 1 PCS |
| E | Long interval bar | 3 PCS |
| F | Short interval bar | 1 PCS |
| G | Small PP pad | 3 PCS |
| H | Big PP pad | 1 PCS |
| I | Self-tapping screws | 10 PCS |
Assembly Steps
- First, install the pull-out cabinet organizer B on the left and right guide rails. Note the front and rear orientation of the guide rail.
- Put the Bottom Basket into the cabinet and adjust its position.
- Attach the guide rail A to the Bottom Basket using screw i.
- Place the big PP pad into the Bottom Basket B as shown.
- Place the small PP pad into the Top Basket C as shown.
- Put the Long interval bar and short interval bar in the designated positions in the Bottom Basket and Top Basket, respectively.
- Insert the support frame D into the mounting hole of the basket and press it to the bottom.
- Install the Top Basket C onto the support frame D.
The installation is complete. The top basket can be adjusted for the left and right positioning of the support frame.
General Care
The single-floor pull out cabinet organizer has a maximum load capacity of
28.6 lb.
Cleaning
- For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint-free cotton cloth.
- Window cleaning liquid or a similar cleaning liquid can be used to clean the surface.
FAQ (Frequently Asked Questions)
Where can I find technical support or get help with product questions?
You can contact us at
[email protected] for technical
support or any product-related questions.
How can I claim the warranty for this product?
Please visit our Technical Support and E-Warranty Certificate page at
www.vevor.com/support for information on
claiming the warranty.
We continue to be committed to providing you with tools at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Thanks for purchasing one of our products, please read carefully the assembly instructions before the installation.
NEED HELP? CONTACT US!
Have product questions?
Need technical support?
Please feel free to contact us:
[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
PRODUCT PARAMETERS
Model| Product Size
（inch）
| Loading
Capacity
| Installation
size(mm)
---|---|---|---
LX-C9138B
| Top basket： 4.9″x15.7″x2.5″
Bottom basket 11.5″x16.5″x2.5″
| ****
28.6 lb (Max)
| ****
313x420x323
ASSEMBLY PRECAUTIONS
- Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight and other product properties are only applicable to correctly and completely assembled products.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Check the installation size of the corresponding model of the pull-out cabinet organizer,and select the cabinet consistent with or close to the inst allation size for installation
USE PRECAUTIONS
WARNING : TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the product.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use on kitchen cabinet only. Do not use it alone on the ground or on the desktop.
- Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.
PARTS LIST
ASSEMBLY STEPS
- First install the pull out cabinet organizer B on the left and right guide rail (note: the front and rear of the guide rail and the left and right direction)
- Put the Bottom Basket into the cabinet, adjust it back and forth, position it right and left, and then the guide rail A with screw i
- Place the big PP pad into the bottom basket B as shown
- Place the small PP pad into the top basket c as shown
- Put the Long interval bar and short interval bar in the positions shown in the bottom basket and the top basket, respectively
- First insert the support frame D into the mounting hole of the basket, and press to the bottom. Then install the top basket C to the support frame D, as shown
- The installation is complete
Note : The top basket can adjust the left and right position of the
support frame to achieve the left and right effect as shown in the
figure
General Care
The single-floor pull out cabinet organizer has a maximum load load of 28.6 lb
.
Cleaning
- For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint free cotton cloth.
- Window cleaning liquid or a similar cleaning liquid can be used to clean the surface.
Importer : WAITCHX
Address : 250 bis boulevard Saint-Germain 75007 Paris
Importer : FREE MOOD LTD
Address : 2 Holywell Lane, London, England, EC2A 3ET
Manufacturers : Zhongshan Xiangkai Hardware Co., LTD
Address : No.2, Jinxiang Road, Sanjiao Town, Zhongshan City, Guangdong
Province, China Made in China
EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
Support and E-Warranty Certificate https://www.vevor.com/support