JOHN DEERE EZtrak Z200 Zero Turn Mowers Instruction Manual
- October 26, 2023
- John Deere
Table of Contents
INSTALLATION INSTRUCTIONS
EZtrak Z200 / ZTrak Z300
Boarding Step
ST50617 06/06/2022
ENGLISH
LP66653
Product Compatibility
This kit is compatible with EZTrak Z200 (2015 and prior) and ZTrak Z300 (2016
and later) series mowers.
Parts in Kit
| Parts Description | Qty | Hardware Bag | Qty |
|---|---|---|---|
| Platform (A) | 1 | 3/8” x 2 1/2” Flange Bolt | 4 |
| Clamp Plate (B) | 1 | 3/8” Flange Nut | 4 |
NOTE: Retain these installation instructions with the machine operator’s manual.
Installing
Parking Safely
- Stop machine on a level surface
- Disengage mower blades
- Move motion control levers out to the Start/Shutdown position
- Lock the parking brake
- Stop the engine
- Remove the key
- Wait for the engine and all moving parts to stop before you leave the operator’s seat
- Disconnect the negative battery cable or remove the spark plug wire (for gasoline engines) before servicing the machine
Installing
- Use 3/8” x 2 ½” flange bolts and 3/8” flange nuts to attach platform (A) and clamp plate (B) to the left side frame rail underneath the foot rest. Hand-tighten bolts.
- Confirm Boarding Step is level front to back and clears frame, deck, and front wheel assembly components.
- Use a wrench to hold flange nuts on the inside of the mower while tightening flange bolts on the outside.
Operation
Board the vehicle as listed in the vehicle owner’s manual or from the left side by utilizing the boarding step.
Warranty
Limited Warranty for New John Deere Licensed Products
Agri-Fab’s Boarding Step is guaranteed to be free from defects in material and
workmanship from the date of purchase for 2 years of residential use, and 6
months of commercial use, provided that the purchaser properly assembles,
installs, uses, and maintains the products in accordance with this manual.
The purchaser’s failure to adhere to such requirements will void the warranty.
To the extent permitted by applicable law, all other warranties,
representations, obligations, and conditions, expressed or implied, including
but not limited to implied warranties of merchantability, fitness for any
particular purpose, and non-infringement, are hereby
disclaimed and excluded.
Any product which does not meet the warranty shall, as the purchaser’s sole
and exclusive remedy, be repaired or replaced by Agri-Fab. This warranty is
non-
transferable.
In addition, our warranty does not cover:
- Labor charges
- Loss or consequential, incidental, or special damages of any kind
This product was manufactured by Agri-Fab, Inc, a John Deere Licensee, located at 809 S Hamilton Street, Sullivan, IL 61951. If you have any questions or concerns with the assembly, installation, or operation of this attachment, see your local John Deere dealer or call Agri-Fab at 1-800 448-9282 for assistance.