NITECORE LA10 CRI Portable Camping Light User Manual
- June 4, 2024
- Nitecore
Table of Contents
NITECORE LA10 CRI Portable Camping Light
OUTPUT RUNTIME
NOTICE:
The above data flashlight has been testing measured standards accordance FL1
using 1x AA (1.2V, 2450mAh) battery under laboratory Conditions. The data may
vary slightly during real-world use
due to battery type, individual usage habits and environmental factors
Features
- Ultra-portable camping light Two available colour temperature options
- LA10: Utilises a CREE XP-G2 S3 LED
- LA10 CRI: Utilises a Nichia 219B LED, CRI290
- Powered by a single AA sized battery
- Maximum runtime up to 23 hours
- 3 brightness levels and 1 special mode available
- High-efficiency regulation circuit provides non flickering output
- Reverse polarity protection Magnetic tail cap with tail stand capability
- In accordance with IPX6
- Impact resistant to1 meter
Dimensions
- Length:3.09″(78.5mm)
- Tube diameter:0.89″ (22.6mm)
- Weight:1.51oz (42.7g) (without battery)
Battery Options
Operating Instructions
Battery installation Insert one AA battery with the + polarity pointing towards the head, as illustrated in the diagram below:
Power ON/OFF
Tighten the tail cap to turn the light on, loosen the tail cap to turn the
light off.
Note:
The LA10/LA10 CRI’s light bar has lipstick-like extensile and retractile
movement through the open tube end. The bar can be moved by rotating the base
of the light in clockwise and anti-clockwise motion.
Brightness adjustment
Turning the LA10/LA10 CRI on within a 2 seconds interval after it is turned
off will switch the light to the next available mode, repeat this process to
cycle through “low-mid-high-beacon”.
Note:
The LA10/LA10 CRI does not have memory function, it will always be turned on
at the low output after it has been turned off for more than 2 seconds.
Changing battery
Change battery when output becomes dim or unresponsive.
Maintenance
Wipe the threads every 6 months with clean cloth followed by a thin coating of silicon-base lubricant.
Precautions
- Do NOT install batteries backward, it renders the light inoperative.
- Always use quality batteries, remove batteries from the battery compartment when the light will be left unattendedfor extensive period.
- Avoid direct eye exposure.
- Packaging contains small assembly parts, keep away from children to avoid danger of suffocation.
- Do NOT disassemble or modify the product.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service.
Should any problem covered under warranty occurs, customers can contact their
dealers or distributors in regards to their warranty claims, as long as the
product was purchased from an authorized dealer or distributor. NITECORE’S
Warranty is provided only for products purchased from an authorized source.
This applies to all NITECORE products. Any DOA / defective product can be
exchanged for a replacement through a local distributor/dealer within the 15
days of purchase. After 15 days, all defective/ malfunctioning NITECORE”
products can be repaired free of charge for a period of 60 months (5 years)
from the date of purchase. Beyond 60 months (5 years), a limited warranty
applies,
covering the cost of labor and maintenance, but not the cost of accessories or
replacement parts. The warranty is nullified if the product(s) is/are broken
down, reconstructed and/or modified by unauthorized parties, or damaged by
batteries leakage. For the latest information on NITECORE® products and
services, please contact a local NITECORE® distributor or send an email to
service@nitecore.com. XAIl images, text and
statements specified herein this user manual are for reference purpose only.
Should any discrepancy occurs between this manual and information
specified on www.nitecore.com. SYSMAX Innovations
Co, Ltd. reserves the rights to interpret and amend the content of this
document at any time without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>