ANYSECU GT-12 Handheld FM Transceiver User Guide
- June 15, 2024
- ANYSECU
Table of Contents
ANYSECU GT-12 Handheld FM Transceiver
LED Indicator
Basic Operation
Charging
Caution
Use the approved charger to charge the battery.
-
Switch On /off
Turn the [Power/Volume knob] clockwise to switch the transceiver power ON till a click is heard. -
Volume Adjustment
Rotate the [Power/Volume knob] to adjust the volume. Turn clockwise to increase the volume and counter-clockwise to decrease the volume. -
Frequency/Channel Mode Switch
Long press [OK] key to switch frequency mode and channel mode. -
Channel Mode
In Channel mode, rotate channel knob to switch channels.
Product Overview
Product Layout
Status Indication
Display
Icon Description
You can also directly input the channel number by the keypad. For example, if you want to switch to channel 1, input 0+1 (total 2 digits), and it will switch to channel 1.
Frequency Mode
In Frequency model, input the VFO frequency directly by the keypad.
Push To Talk
- Press PTT-1 key to transmit in A Band.
- Press PTT-2 key to transmit in B Band.
Reverse Frequency/Talk Around
In Channel mode/Frequency mode, short press [] key, a symbol “R” will
appear on the screen, which means reverse function is on. TX frequency and RX
frequency as well as CTCSS/DCS will be exchanged.
Short press [] key again, a symbol “T ” will appear on the screen, which
means talk around function is on. TX frequency is the same as the RX
frequency, and the TX CTCSS/DCS is also converted to the same as the RX
CTCSS/DCS.
Keypad Lock / Unlock
In standby, long press [*] key to lock / unlock keypad.
Scan
In Frequency mode, long press # key to turn on/off scan function.
Battery Voltage
In standby, long press [0] key to check the current battery voltage.
Function Keypad
Troubleshooting
If the solutions below can not fix the problems for you, or you may have some other queries, please contact us or your local dealer for more technical support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>