hpi-racing TF-51 FHSS Digital RC System Instructions
- June 15, 2024
- hpi-racing
Table of Contents
TF-51 FHSS Digital RC
System Instructions
TF-51 FHSS Digital RC System
TF- 51
2.4 GHz
FHSS Digital RC System
Overview
TF-51 Transmitter
Equipment Needed
RF-51/N Receiver *
| Electric setup. | #160555 HPI RF-51 Receiver |
|---|---|
| Nitro setup. | #160556 HPI RF-51N Receiver |
The caution or attention symbols will warn you about steps that can be very
dangerous. Please read and understand the instructions carefully before
proceeding.
Cautions Failure to follow these instructions can damage your kit, and
cause serious bodily injury or death.
Attention Failure to follow these instructions can cause injury to
yourself or others. You might also cause property damage or damage your kit.
Operating Suggestions
Be sure to thoroughly read and understand these instructions before using this
product. Pay particular attention to the items labelled Caution and Attention.
Failure to follow these instructions may result in damage to your RC car and
injury to yourself and other people.
Cautions If you make changes or adjustments not shown in the instruction
manual, your vehicle may be damaged.
Safety Guidelines about Products
- Turn on the transmitter first then the receiver. Turn off the receiver first then the transmitter.
- Before running you must check the radio function.
- This radio is made of precision electronics, do not expose to extreme heat, vibration, shock or water.
- Do not cut antenna wire.
- 2.4GHz radio frequency only functions by line of sight, if you drive behind a solid object or around a corner and lose sight of the vehicle you may lose control of the RC car.
Attention If you make changes or adjustments not shown in the instruction
manual, your vehicle may be damaged.
Safety Guidelines when Operating Products
- Turn on the transmitter first then the receiver. Turn off the receiver first then the transmitter.
- Be careful to not short circuit any of the wires as this will cause damage to the unit.
- After running, the motor, ESC and wires may be hot. Do not touch as they can cause burns.
- Do not disassemble and make any modifications to the transmitter and receiver/ESC.
Transmitter Features
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>