Wanneton F1 GMRS Walkie Talkies for Adults Long Range User Guide

Table of Contents

Specifications
- Product Name: Wonneton Intercom
- Programming Methods: Tool download and computer environment programming
- Tool Download Link:https://www.dropbox.com/s/7hrngvveloakwzh/F2-9%20Setup0228.exe?dl=0.
- Computer System Requirement: Windows 10

Method 1: Tool Download
- Download the accessory tool from the provided link: https://www.dropbox.com/s/7hrngvveloakwzh/F2-9%20Setup0228.exe?dl=0.
- Install the accessory tool on your computer.
- Click on “Settings” within the tool to switch to the English interface.
- Connect the Wonneton Intercom to your computer using the programming cable.
- Follow the interface function prompts in the tool to perform actions such as reading frequency, writing frequency, and setting-related functions.
Method 2: Computer Environment Programming
- Ensure your computer system is running Windows 10.
- Connect the Wonneton Intercom to your computer using the programming cable.
- Follow the interface function prompts on your computer to perform actions such as reading frequency, writing frequency, and setting related functions.
One Click Match
- The one-click match feature allows you to copy the intercom frequency with a single button press, eliminating the need for programming.
- Power on the Wonneton Intercom and tune it to channel 1.
- Power off the Wonneton Intercom.
- Press and hold the side button on the Wonneton Intercom, then power it on.
- When you see the green light flashing after powering on, it means the intercom has entered the decoding mode.
- Take another walkie-talkie that needs to be linked and transmit a signal.
- After the decoding intercom receives the signal, it will emit a prompt sound indicating that the decoding was successful.

Q: Can I use the programming cable to connect the Wonneton Intercom to any computer?
- A: Yes, as long as the computer has a compatible operating system (Windows 10) and the accessory tool is installed.
Q: Do I need to install any drivers for the programming cable?
- A: No, the programming cable should work without requiring additional drivers.
Q: How do I switch back to the default language interface of the accessory tool?
- A: Within the accessory tool, navigate to the settings and choose the desired language from the available options.
Q: Can I use the one-click match feature on any channel?
- A: The one-click match feature is specifically designed for channel 1. It may not work as intended on other channels.

Wonneton intercom programming can use the following two methods

Tool download link：

Use computer environment programming (computer system win10)

After installing the accessory tool, click Settings to switch to the English interface $Wanneton-F1-GMRS-Walkie-Talkies-for-Adults-Long-Range-fig-1 $1$$
Plug into computer and machine with programming cable
According to the interface function prompts, read frequency, write frequency, set related functions $Wanneton-F1-GMRS-Walkie-Talkies-for-Adults-Long-Range-fig-1 $2$$

Copy the intercom frequency with one key, without programming

How to one-click match？

Power on first, then tune to channel 1, then power off
Press and hold the side button, then power on
When you see the green light flashing after powering on, it means entering the decoding mode
Pick up another walkie-talkie that needs to be linked to transmit
After the decoding intercom receives the signal, there will be a “di” prompt sound, indicating the decoding is successful.