HEDBOX UNIX-SO V-Mount Adaptor Plate User Manual
- June 15, 2024
- HEDBOX
Table of Contents
HEDBOX UNIX-SO V-Mount Adaptor Plate
Product Information
OVERVIEW
Before operating the unit, please read this manual thoroughly and save it for
future reference. The HEDBOX UNIX Cine Professional V-Mount Battery Power
Plate, is the right choice for professional video and photo users. Using high
quality materials and strong durable production, it represents the top line of
Cine products. With 3 x D-tap 14.8V / 10A DC and 1 x USB 5V / 2.1A DC power
out it can be used as the professional V-lock adapter power plate for all
14.8V V-lock pro battery packs. It easily converts any professional camera or
camcorder to a V-Mount.
Use the UNIX adapter plate only with equipment according to Manual/Operating instructions recommendations.
Breakaway DC cable
Various models of UNIX adaptor plates like UNIX-SO; UNIX-DC; UNIX-0B; UNIX-HY; UNIX-4X UNIX-1B; UNIX-0BL; UNIX-1BL; UNIX-1B4 are supplied with breakaway cable with installed appropriate connector, at the end of a 50cm long cable. With this breakaway DC power cable, UNIX can be used to power various cameras and devices in video and photo market. Those models of UNIX have integrated PCB to regulate power from installed battery pack on the plate from 14.4V ~ 14.8V to 7.2V,12V or 19.6V. To choose the right UNIX model for your use, please visit our website at www.hedbox.com.
Factory standard plate mounting
- UNIX is designed to be universal adapter plate that can be attached to any model of camera, camcorder, LED light, monitor or any other units.
- As a factory standard, UNIX is supplied with 4x screw holes shown on “Exibit A”.
- Please use 4x M3 screw to securely fit the UNIX plate to the desired unit, on which the Adaptor Plate will be used accordingly. In the box, UNIX is supplied with 4 x M3x12 screws.
Extra holes plate mounting
How to remove Plastic Cover Cap
- To use UNIX with other products that require other hole layouts, please use Hole B or Hole C shown on “ Exibit B” to firmly fit the plate to the designed products.
- Remove the plastic cover cap, shown on “Exibit C”.
- Please use 4 x M3 screw to securely fit the UNIX plate to the desired unit, on which the Adaptor Plate will be used accordingly.
- The Box of UNIX is supplied with 4 x M3x12 screws.
3x D-Tap and 1x USB-A power Out
- 3x D-Tap DC Power Output 14.8V DC / 8A / 100W
- 1x USB-A 5V / 2.1A / 10W
- Keep D-Tap and USB Power socket clean from dust
- Three D-taps allow extra powering for cameras, on board recorders, LED lights, monitors, remote follow focus, wireless transition systems, etc.
- The USB 5V/2.1A output can be used to power any external USB electronic devices.
- This function allows you to use the Unix V-lock plate like a power station to charge your cell phone, tablet, or any other electronic device that can be powered with USB 5V power.
Caution
- Worldwide use with any of V-Mount 14.4V battery packs.
- Passed MBTR 5000H test and owns patent with a more reliable quality warranty.
- Safety protection: Over-current protection gets at 10A.
- Specially designed for use on all Hedbox battery packs.
- Don’t try to disassemble or open the cover under any circumstance to avoid danger.
- The UNIX plate will be damaged if not used properly.
- Children should use it under the supervision of adults.
- It’s common for the unit to feel warm when using.
- This device is for indoor use only; don’t use it in high temperatures and high moisture environments.
- Avoid dropping and bumping; otherwise, the electrical components will be damaged.
- After inserting the battery pack onto the plate holder, be sure that the battery firmly locks.
- Please check that the V-Mount Battery pack is compatible with UNIX voltage and current.
- Please use the manual instructions for the battery pack that you want to install on the plate.
- Read that manual carefully before using the battery with UNIX plate.
- Don’t try to disassemble or open the cover under any circumstance to avoid danger.
- We are not responsible for any damage caused by incorrect use or operation.
- Never short-circuit the adaptor plate power terminals.
- Do not use UNIX plate near water.
- When the UNIX plate is unused, please unplug the battery to prevent an accident.
- Use UNIX plate only with a 14.4V V-Mount battery pack
Specifications
- Battery Type Support: Battery 14.4V ~ 14.8V
- Mount Type: V-Mount
- D-Tap Output 1: 14.8V / 10A DC
- D-Tap Output 2: 14.8V / 10A DC
- D-Tap Output 3: 14.8V / 10A DC
- USB-A Output: 5V / 2.1A DC
- Mounting Method: V-Mount Holder Place
- Operating Temperature: – 20°C to +45°C (–4°F to +113°F)
- Dimensions (WxDxH): 146 x 102 x 26 mm
- Net Weight: 185g
Design and specifications are subject to change without notice.
If you want to know more about HEDBOX Products please visit our website:
www.hedbox.com
Note:
Always ensure that the unit is operating properly before use.
HEDBOX WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Product Usage Instructions
Step 1: Mounting the V-Mount Adaptor Plate
- Ensure that the unit is turned off and disconnected from any power source.
- Align the V-Mount Holder Place on the back of the camera or camcorder.
- Insert the plate into the V-Mount Holder Place, making sure it is securely attached.
Step 2: Power Connection
- Connect the Breakaway Cable to the appropriate connector on the end of the V-Mount Adaptor Plate.
- Ensure that the Breakaway Cable is securely connected to the camera or camcorder.
Step 3: Power Output
The V-Mount Adaptor Plate provides three D-Tap outputs and one USB-A
output.
- D-Tap Output 1: 14.8V / 10A DC
- D-Tap Output 2: 14.8V / 10A DC
- D-Tap Output 3: 14.8V / 10A DC
- USB-A Output: 5V / 2.1A DC
Step 4: Removing the Plastic Cover Cap
If needed, follow these steps to remove the plastic cover cap:
- Locate the Plastic Cover Cap on the V-Mount Adaptor Plate.
- Gently pry the Plastic Cover Cap off using a suitable tool.
Step 5: Caution in Use
Always exercise caution when using the V-Mount Adaptor Plate. Follow
these guidelines:
- Use the UNIX adapter plate only with equipment according to the Manual/Operating instructions recommendations.
- Ensure that the unit is operating properly before use.
- Avoid mechanical shock.
- Never expose the power plate to rain or moisture.
- Keep away from children.
- Never expose the power plate to temperatures above 60°C (140°F)
- Please consult the store where you purchased this power plate or your sales representative before using the power plate in a product whose Operation Manual Operating Instruction does not explicitly state that the power plate can be used or before using the power plate in conjunction with another power supply. Inappropriate use of the power plate may result in unit disoperation.
- A large discharge amount may accelerate the deterioration of the power plate power wiring.
- To prevent this, use the battery pack with a discharger amount of about 8 A or less.
- The maximum discharge amount is 10 A for this model of power plate at 23°C (73°F).
- Continuous use at levels beyond the maximum discharge level may cause the protection circuit to shut off the current to protect the internal electronic structure.
Frequently Asked Questions (FAQ)
-
Q: What type of batteries does the V-Mount Adaptor Plate support?
A: The V-Mount Adaptor Plate supports V-lock pro battery packs. -
Q: What are the power output specifications for the D-Tap and USB ports?
A: The D-Tap outputs provide 14.8V / 10A DC each, while the USB-A output provides 5V / 2.1A DC. -
Q: Is the V-Mount Adaptor Plate compatible with all cameras and camcorders?
A: The V-Mount Adaptor Plate can be used with any professional camera or camcorder that can be converted to a V-Mount. -
Q: How do I remove the Plastic Cover Cap?
A: To remove the Plastic Cover Cap, locate it on the V-Mount Adaptor Plate and gently pry it off using a suitable tool.