HEDBOX RP-DC150 V-Mount Dual LCD Simultaneous UPS Battery Charger User Manual

HEDBOX RP-DC150 V-Mount Dual LCD Simultaneous UPS Battery Charger User Manual

Thank you for your purchase of the professional quad simultaneous power bank battery charger RP-DC150. This intelligent charger for digital camera and camcorder batteries was designed with advanced power charging technology, allowing you to charge your professional batteries at studio or at home. The charger is compatible with Li-Ion rechargeable batteries that run on power voltage of 14.4V to 14.8V. Please read these operating instructions carefully before operating this unit to power up professional camcorder or to charge battery pack.

Product Features

• Charges a professional battery pack that runs on 14.4V to 14.8V
•  Supplies power for professional studio cameras, LED light, field monitors etc.
• LCD displays the power, battery ON, charging, and UPS backs up power supply status.
•  Provides constant output voltage of: 16.5V / 4.5A ; 75W
• Worldwide use with input between AC 100 – 240V;
• With advanced MCU control, charger fully controls the charging process of the battery.
• With CH1 or CH2 battery attached to the unit. On DC Power Out, RP-DC150 provides power bank backup power supply – UPS mode (Uninterruptible power supply) in case of AC failure.
• 100,000 levels of anti-static design, high temperature and fire-proof makes it safer.
• Passed MBTR 5000H test and has patent with more reliable quality warranty;
• Safety protection：
  • Over temperature protection reaches at 85°C,
  • Over voltage protection reaches at 19.5V,
  • Over current protection reaches at 6.5A,
  • Short circuit protection & Charging time protection
  • Dual charging port provides simultaneous charging of two batteries with different capacities.
  • Specially designed for use on all Hedbox Battery Packs.
• Dual charging technology, the CC and CV, provides high battery charging efficiency.
• Pre-charging function 0V activation efficiently extends battery life.
• Don’t try to disassemble or open the cover under any circumstance in order to avoid danger.
• The charger will be damaged if not used properly.
• Children should use it under the supervision of adults.
• Take out the rechargeable battery from the charger slot when the battery is entirely charged or if the charger process is stopped.
• It’s common for the unit to feel warm when using.
• Avoid dropping and bumping otherwise the electrical components will be damaged

Overview
**Product Components:

**

1. Main Power switch ON/OFF
2. Power Socket 100V – 240V / 50-60Hz
3. Fan Cooler ( Provides cooling of the unit)
4. LCD Screen Monitor (Blue Backlight Ilumination)
5. CH1 and CH2 Battery Socket Indicator
6. CH1 and CH2 Battery Socket Holder
7.  Battery release push up button
8. 4-Pin XLR (Female) DC Output 16.5V / 4,5A 75W
9. Retractable spider stability support legs

Operation instruction

1. Plug the supplied power cord on the main AC power outlet (picture B).
   

2. Plug the other side of the supplied power cord to the charger AC Power ( picture C).

3. Turn ON the AC Power Switch (Picture C).

4. The LCD screen will illuminate Blue and the HEDBOX Logo will turn on (picture D)

Battery instalation on to the charger:

1. On the bottom of the charger, useand spread wide the Spider Stability Support legs. This will ensure extra stability when the battery is attached to the main body of the RP-DC150 Charger.
2. Use your V-Mount battery. Insert the battery into the V-lock Mount plate. Be sure that the battery release of the charger firmly locks the battery. Observe the charger LCD monitor. If the battery is attached appropriately, it will illuminate the battery channel,and the current battery capacity

LCD Display Legend Information:

active
| Batt. Full| When icon is ON battery is fully charged
| BatteryCapacity| Displays the current battery capacityin percentage (%)
| Charge| State Of Charge capacity LOGO
| battery charging progress| Displays the battery charging progress and battery capacity for channel 1
| Power ready| When icon is ON the charger has finished initialization and is ready for full operation
| battery charging progress| Displays the battery charging progressand battery capacity for channel 2
| Batt. Full| Icon is ON the battery is fully charged
| BatteryCapacity| Displays the current battery capacityin percentage (%)
| Charge| State Of Charge capacity LOGO
| Channel 2 UPS| Displays that the battery is lock onchannel 2 UPS mode is active

DC Out Powering & UPS Power Bank Mod:

1. To power any broadcast unit with DC 16.4V constant power from XLR DC out, use the supplied RPC-DC4X4 cable with 4-pin XLR (Male to Female) connector. Connect the cable to the female charger DC 4-Pin XLR power out (picture F.)
   

2. When an RPC-DC4X4 cable is plugged into the 4-pin XLR auxiliary power output (picture F) and the main power AC switch (picture C) is ON, the charging process of the battery will be suspended. The main DC power out of the charger will be distributed to the 4-Pin XLR power out with DC 16.5V / 4.5A / 75W.

3. When an RPC-DC4X4 Cable is plugged into the 4-pin XLR auxiliary power output (picture F) and the main power AC switch is turned OFF (picture C) or an unexpected main electric power failure occurs (AC input is cut off), charger with the inserted battery will automatically go to the UPS BACK UP POWER MODE (Power Bank). In this mode, the HED-DC150V provides power to the DC Out, from the battery that is attached to the charger. On the LCD Screen, the UPS Icon will appear. This indicates that the power from the battery is provided to the DC Out (picture E).

4.  When two batteries are attached on the charger at the same time, the UPS powering (Power Bank) from the battery to the DC Out is made by priority.

5.  Once the RP-DC4X4 cable is unplugged, the charger will continue the previous charging sequence from the same point of interruption.

Notice

• Please check that the components size and voltages are compatible according to your Camcorder DC Voltage Input or battery pack charging voltage and current. Please use the manual instruction of the camcorder or battery pack, and read this manual carefully before using the unit with this AC Adaptor / Charger.
• We are not responsible for any damage caused by incorrect use or operation.
• This device is for indoor use only, don’t put or use it in high temperatures and high moisture  environment.
• It’s a common phenomenon for the unit to feel warm when using;
• Avoid dropping and bumping otherwise the electrical components will be damaged;
• Don’t try to disassemble or open the cover under any circumstance in order to avoid danger

Specification

Note:
Always ensure that the unit is operating properly before use.
HEDBOX WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER
www.hedbox.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>