HEdbox RP-DC200 Quad 4 Chanel Simultaneous UPS Battery Charger User Manual

HEdbox RP-DC200 Quad 4 Chanel Simultaneous UPS Battery Charger

Product Information

Specifications

• AC Power Input: 100V – 240V / 50-60Hz
• DC Power Output: 16.5V / 4.5A 75W
• Control Display: LED Indicators
• Single Charger Out: Yes
• Dual Charger Out: Yes
• Quad Charger Out: Yes
• Output Connection: 4-Pin XLR (Female)
• Battery Charging Type: Constant Voltage (CV) and Constant Current (CC)

Frequently Asked Questions

• Q: What is the input voltage range for the AC power?
  • A: The AC power input range is 100V – 240V / 50-60Hz.
• Q: What is the output voltage and current for the DC power?
  • A: The DC power output is 16.5V / 4.5A 75W.
• Q: How can I know if the battery is fully charged?
  • A: The Charger LED Charging indicator will go OFF when the battery is fully charged.
• Q: Can I use this charger as a power bank?
  • A: Yes, the user manual provides instructions on how to use the charger in power bank mode. Please refer to the manual for details.
• Q: Is the operating temperature specified?
  • A: No, the operating temperature is not specified in the given text. Please refer to the user manual or contact the manufacturer for more information.
• Q: What is the warranty period for this product?
  • A: The warranty period is not mentioned in the given text. Please refer to the warranty information provided by the manufacturer.

Product Usage Instructions

Operation Instruction

To use the Quad 4-Channel Simultaneous UPS Battery Charger, follow these steps:

1. Plug the Power Cord into the wall AC power.
2. Plug the cord into the RP-DC200 charger and turn on the AC Power Switch.
3. The Power LED indicator will illuminate Red, indicating that the charger unit is ON.

Battery Installation on Charger

To install the battery on the charger, follow these steps:

1. On the bottom of the charger, use and spread wide the Spider Stability Support legs. This will provide extra stability when the battery is attached to the main body of the RP-DC200 charger.
2. Use a V-Mount Battery and insert it into the V-lock Mount plate. Observe the Charger LED Battery On indicator. It will illuminate BLUE if the battery is attached appropriately.

Charging Battery Pack

To charge the battery pack, follow these steps:

1. Ensure that the SOC (State Of Charging) charger LED Charging indicator is OFF before starting the charging process.
2. If the SOC85% charger LED Charging indicator illuminates GREEN, it indicates that the charging process is at the finishing stage.
3. When the charging process is finished and the battery is fully charged, the Charger LED Charging indicator will go OFF, indicating that the charging process is done and the battery is full and ready to use.

DC Out Powering & Power Bank Mode

• To use the DC Out Powering & Power Bank Mode, follow the instructions provided in the user manual. (Not specified in the given text.

Thank you for your purchase of the professional quad simultaneous power bank battery charge RP-DC200.This intelligent charger for digital camera and camcorder batteries was designed with advanced power charging technology, allowing you to charge your professional batteries at studio, or at home.The charger is compatible with Li-Ion rechargeable batteries that run on power voltage of 14.4V to 14.8V. Please read these operating instructions carefully before operating use this unit to power up professional camcorder or to charge battery pack.

Product Features

• Charges a professional battery pack that runs on 14.4V to 14.8V
• Supplies power for professional studio cameras, LED Light, field monitors etc.
• LED displays the power status, battery ON status, charging status, and UPS Back Up Power Supply status, with red, blue and green colors.
• Provides constant output voltage of: 16.5V / 4.5A ; 75W
• Worldwide use with input between AC 100 – 240V;
• With advanced MCU Micro-Computer Chip control, charger fully controls the charging process of the battery.
• With CH1, CH2, CH3 or CH4 battery attaches to the unit. On DC Power Out, RP-DC200 provides power bank Back Up power supply – UPS mode in case of AC failure.
• 100,000 levels of Anti-Static design, High Temperature and Fire-Proof makes it safer.
• Passed MBTR 5000H test and has patent with more reliable quality warranty;

Safety protection

1. Over temperature protection reaches at 85°C,
2. Over voltage protection reaches at 19.5V,
3. Over current protection reaches at 6.5A,
4. Short circuit protection & Charging time protection

• Quad charging port design provides simultaneous charging of four batteries different capacity.
• Specially designed for use on all V-Mount Hedbox Battery Packs.
• Dual charging technology, the CC and CV, provides high battery charging efficiency.
• Pre-charging function 0V activation efficiently extends battery life.
• Don’t try to disassemble or open the cover under any circumstance in order to avoid danger.
• The charger will be damaged if not used properly.
• Children should use it under the supervision of adults.
• Take out the rechargeable battery from the charger slot when the battery is entirely charged or if the charger process is stopped.
• It’s a common phenomenon for the unit to feel warm when using.
• Avoid dropping and bumping otherwise the electrical components will be damaged..

Overview

Product Components

1. Main Power switch ON/OFF
2. Power Socket 100V – 240V / 50-60Hz
3. Fan Cooler ( Provides cooling of the unit)
4. Power LED Indicator (Red Color status charger unit is ON)
5. Battery Charging LED Status
6. Battery connected on charger LED Status
7. UPS (Uninterruptible power supply) BackUp Power Supply LED status
8. Battery release push up button
9. 4-Pin XLR (Female) DC Output 16.5V / 4,5A 75W

Operation instruction

1. Plug the Power Cord on the wall AC power (picture A).
2. Plug the cord on the RP-DC200, and turn ON the AC Power Switch (picture B).
3. The “Power” LED indicator will illuminate Red during AC power.

Battery installation on charger

1. On the bottom of the Charger use and spread wide the Spider Stability Support legs. This will allow the charger to have extra stability when the battery is attached to the main body of the RP-DC200 charger.
2. Use V-Mount Battery, insert battery in to the V-lock Mount plate. Observe the Charger LED “Battery On” indicator. It will illuminate BLUE, if the battery is attached appropriately.

Charging battery pack

1. When you insert battery to the charger, LED “Battery On” indicator illuminates BLUE, which indicates that the battery is ready for charging. The charger has four charging plates, that on the LED Indication screen is indicated as CH1, CH2, CH3 or CH4. After insertion of one (1) or two (2) batteries on the charger,charging process starts automatically with 3A±400mAh (Dual Mode). If you insert third (3) or fourth (4) battery charging process will switch to Quad Mode 2A±400mAh (simultaneous charging). Charger LED When “Charging” indicator illuminates RED, it indicates that the charging process of the Battery is activated.
2. If the SOC≥85% ( State Of Charging) charger LED “Charging” indicator illuminates GREEN, it indicates that the charging process is at the finishing stage.
3. 3. When the charging process is finished and battery is fully charged, Charger LED “Charging” indicator will go OFF, indicating that the charging process is done and the battery is full and ready to use.

Power

| LED| Indication
---|---|---
Power LED Off| | No AC Power or Charger main power Swich is Off
Power LED On| | Charger Power is ON

Charging

| LED| Indication
---|---|---
#1 #2 #3 #4 LED On| | Battery (CV) Mod Charging Proces < 85% Capacity
#1 #2 #3 #4 LED On| | Battery (CC) Mod Charging Proces > 85% Capacity
#1 #2 #3 #4 LED Off| | Battery Fuly Charged = 100% Capacity
#1 #2 #3 #4 FLESH| | Battery Charger Out is shorted or overloaded

Battery

| LED| Indication
---|---|---
LED On| | Battery ready for charging or UPS
LED Off| | No battery on charger

UPS

Power

| LED| Indication
---|---|---
LED On| | Battery provide UPS Power Supply on XLR Out
LED Off| | Battery off or deplided for UPS Power Supply

DC out powering & power bank mod

1. To Power any pro camcorder or any other unit with constant power, on DC out, use the supplied DC-DC4X4 cable with 4-pin XLR (Male to Female) Connector. Connect the cable to the charger DC 4-pin Power Out (picture F.)
2. When a RPC-DC4X4 cable is plugged into the 4-pin XLR auxiliary power output, and the main power switch on the charger RP-DC200 is ON, charging process of the battery will be suspended. The “Charging” LED will go OFF and “Battery On” LED indicator (if the battery is on the charger) will illuminate BLUE. In this case output power is 16.5V 4.5A/ 75W.
3. If you turn OFF the main power switch on the charger, or unexpected main electric power failure occurs (AC input is cut off), Charger RP-DC200 with the inserted battery will automatically go to the UPS BACK UP POWER MODE. In this case, the RP-DC200 provides power to the DC Out from the battery that is attached to the charger, the “UPS Power” LED indicator illuminating freen, indicates that the power from the battery is provided to the DC Out.
4. When two, three or four batteries are attached on the charger at the same time, the UPS powering from the battery to the DC Out is made by priority.
5. Once the cable is unplugged, the charger will continue the previous charging sequence and from the same point of interruption.

Notice

Please check that the components size and voltages are compatible according to your camcorder DC Voltage input or battery pack charging voltage and current. Please use the manual instruction of the camcorder or battery pack, and read this manual carefully before using the unit with this AC Adaptor / Charger.

• We are not responsible for any damage caused by incorrect use or operation.
• This device is for indoor use only, don’t put or use it in high temperatures and high moisture environment.
• It’s a common phenomenon for the unit to feel warm when using;
• Avoid dropping and bumping otherwise the electrical components will be damaged;
• Don’t try to disassemble or open the cover under any circumstance in order to avoid danger.

Specification

• Design and specifications are subject to change without notice.

Product Registration

Note

Always ensure that the unit is operating properly before use. HEDBOX WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER THE EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

Other Products

BATTERY CHARGERS

www.hedbox.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>