YITAMOTOR CEETSS-0031 6.5 Inches Running Boards User Manual

YITAMOTOR CEETSS-0031 6.5 Inches Running Boards

PRODUCT INFORMATION

• CEETSS-0031
• CEETSS-0043
• CEETSS-0032
• CEETSS-3037
• CEETSS-0033

PRODUCT SPECIFICATION

Part List

Qty. Description

• X2 Front Bracket
• X4 Center/Rear Bracket
• x 12 MS Hexagon Flange Bolt

Pre-Installed on Step Bar

• x 12 MS Hexagon Flange Bolt
• X 12 MS Flat Washer

PRODUCT DESCRIPTION

Accessibility:
The primary purpose of running boards is to provide an easier and more convenient way for passengers to enter and exit the vehicle. They act as a step that extends out from the vehicle’s sides, making it easier for people, especially those with mobility challenges or smaller stature, to get in and out of the vehicle.

Safety:
Running boards improve safety by reducing the risk of slipping or falling when entering or exiting the vehicle, especially in wet or icy conditions. The textured surface of the running boards enhances traction.

Protection:
These running boards also offer protection to the vehicle’s sides. They can shield the lower body panels from road debris, rocks, and other potential sources of damage. This is especially beneficial for off-road or rugged driving conditions.

Aesthetic Enhancement:
Beyond their functional benefits, running boards can enhance the overall appearance of the vehicle. They come in various styles, finishes, and designs, allowing vehicle owners to customize their vehicle’s look.

Utility:
Some running boards may have additional features, such as integrated LED lighting, which can provide illumination when getting in and out of the vehicle at night. Others may have integrated mud flaps or other practical features.

Load Support:
In some cases, running boards can also serve as a place to stand or step on when loading or unloading roof racks or cargo from the roof of the vehicle.

FEATURES

• IMPORTANT
  This running board side step is compatible with the 2005-2023 Toyota Tacoma Double/Crew Cab; NOT for Access Cab with 2 full-size front doors & 2 suicide rear doors; If you’re not sure what model you have, please check the cab size picture

• PRACTICAL DESIGN
  6″ wide stylish black stainless steel pad provides a textured surface for excellent footing. Each side can support up to 450 lb

• SUPER QUALITY
  The running boards’ structure provides strength and durability. The 6-inch non-slip injection step pad allows easy movement such as stepping in, stepping out, and even jumping (450 lb. capacity)

• SUPREME FUNCTIONALITY
  Made from Stainless Steel and pre-treated with rust-resistant powder coatings. One-piece design ensures excellent performance and looks for years to come

• EASY TO INSTALL
  Easy bolt-on installation with no drilling required. All factory holes are perfectly aligned with the mounts; bolts to factory mount in less than an hour

CARE AND USE INSTRUCTIONS

Before Installation

Read this instruction carefully before starting installation. Proper tools will improve the quality of installation and reduce the time required. If missing parts or any damage is found, please take a picture and contact us. Professional installation would be highly recommended. Periodic check to ensure all mounting hardware remains secure and tight.

Step 1:

1. Locate (3) mounting positions on each side.
2. Remove the rubber plugs or hex bolts on the inner rocker panel.

Step 2:

1. Attach the bracket to the inner rocker panel and secure it with (2) MS hex bolts.
2. Repeat to install the remaining brackets, do not fully tighten.

Step 3:

1. Remove (6) MS hex bolts and (6) MS flat washers from the step bar.
2. Slide mounting tracks to proper positions.
3. With assistance, lift and attach the step bar to brackets. Secure the step bar on brackets with (6) MS hex bolts and (6) MS flat washers.
4. Repeat to install the other side step bar, do not fully tighten.

Step 4:

1. Tighten MS hex bolts on a vehicle with 15 ft-lbs. torque.
2. Adjust the step bar to level and tighten MS hex bolts with 15 ft-lbs. torque.
3. After the step bar is installed, periodic check to ensure all mounting hardware remains secure and tight.

Note : Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>