YITAMOTOR CETMTM-0004 Towing Mirrors Instruction Manual

June 4, 2024
YITAMOTOR

YITAMOTOR CETMTM-0004 Towing Mirrors

YITAMOTOR-CETMTM-0004-Towing-Mirrors-product

Notes

Read this instruction carefully before starting the installation
Proper tools will improve the quality of installation and reduce the time required. All mirrors are asymmetrically designed for better view range. Vehicles without factory heat and signal light functions require additional wiring. If missing parts or any damage is found, please take a picture and contact us. Reference the vehicle owner’s manual to adjust the new mirrors.

INSTALLATION INSTRUCTIONS

Step 1:

  1. Open the front door to remove the upper extension triangular trim panel.
  2. Remove (3) rubber plugs beside the triangular trim panel.
  3. Remove the courtesy lamp cover.
  4. Pry up the door switch panel, and disconnect all connectors.
  5. Remove (2) 7mm bolts.
  6. Carefully pull the door trim panel up and remove the courtesy lamp socket.YITAMOTOR-CETMTM-0004-Towing-Mirrors-fig-1

Step 2:

  1. Peel up the weather shield (do not remove it), and disconnect the mirror harness.
  2. Remove (4) 11mm hex nuts.
  3. Carefully remove the factory mirror.
  4. Cut off the ridge on the base of the new mirror.YITAMOTOR-CETMTM-0004-Towing-Mirrors-fig-2

Step 3:

  1. Take the new mirror, feed studs and harness through the holes on door panel.
  2. Install (4) provided hex nuts to secure the new mirror. Torque to 80 lb in.
  3. Connect mirror harness, 99-02 models require the provided adaptor.

Step 4:

  1. Take the door trim panel, reinstall the courtesy lamp socket and feed the door lock tab through the hole.
  2. Position the door trim panel and reinstall (2) 7mm bolts.
  3. Connect all connectors back to the door switch panel, and reinstall the panel.
  4. Reinstall the courtesy lamp cover.
  5. Reinstall the triangular trim panel and (3) rubber plugs.

Step 5:

  1. Repeat the above steps on the passenger side.
  2. Carefully check all mirror functions before first drive.

Reference Wire Diagram

See the connector from the wire side

  • 1: Mirror Heater
  • 2: Ground
  • 3: Signal Light
  • 4-6: Mirror Motor
  • 7-9: Not Used
  • 10: Side Marker LightYITAMOTOR-CETMTM-0004-Towing-Mirrors-fig-3

99-02 AdaptorYITAMOTOR-CETMTM-0004-Towing-Mirrors-
fig-4

Documents / Resources

| YITAMOTOR CETMTM-0004 Towing Mirrors [pdf] Instruction Manual
CETMTM-0004, CETMTM-0007, CETM-0057, CETMTM-0113, CETM-0057, CETMTM-0119, Towing Mirrors
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals