TZS FA-5560-5 Tower Fan Instruction Manual

TZS FA-5560-5 Tower Fan

Product Information

Specifications

• Model: FA-5560-5
• Type: Tower Fan
• Power: AC 110V-240V, 50/60Hz
• Timer Range: 0 to 12 hours in 1-hour increments
• Fan Speed Levels: 3
• Oscillation Function: Yes
• Modes: Normal, Natural, Sleep

Assembly Instructions

1. First, assemble the two halves of the pedestal.
2. Pass the power cord through the hole in the center of the pedestal.
3. Mount the pedestal to the fan, ensuring that the cable is led through the cable entry.
4. Fix the pedestal to the fan using the provided mounting screws.
5. Insert a CR2025 (3V) battery into the remote control, ensuring that the positive pole is facing up.

Operating Instructions

1. Place the fan on a dry, level, and stable surface.
2. Connect the power cord to a suitable power outlet.
3. To turn the fan on or off, press the [ON/OFF] button.
4. To switch between fan speed levels 1, 2, and 3, press the [SPEED] button repeatedly.
5. To set an auto-off timer, press the [TIMER] button repeatedly. The timer can be set from 0 to 12 hours in 1-hour steps. Selecting 0 deactivates the timer.
6. To start or stop the oscillation function, press the [OSC] button.
7. To switch between Normal, Natural, and Sleep mode, press the [MODE] button repeatedly.

Environment Friendly Disposal
You can help protect the environment! Please remember to respect the local regulations and hand in the non-working electrical equipment to an appropriate waste disposal center.

FAQ

• How do I assemble the pedestal?
  First, assemble the two halves of the pedestal. Then pass the power cord through the hole in the center and mount the pedestal to the fan. Make sure that you lead the cable through the cable entry. Finally, fix the pedestal to the fan using the mounting screws.

• How do I set the timer?
  Press the [TIMER] button repeatedly to set an auto-off timer. The Timer can be set from 0 to 12 hours in 1-hour steps. Selecting 0 deactivates the timer.

• What are the different modes and how do I switch between them?
  The fan has three modes – Normal, Natural, and Sleep. Press the [MODE] button repeatedly to switch between these modes. Normal mode keeps the fan rotating constantly at the set speed. Natural mode varies the fan speed to simulate a natural wind behavior. Sleep mode also varies the fan speed to simulate a natural wind behavior, but decreases the speed level every 30 minutes until it reaches level 1. The display goes into standby mode after 15 seconds.

IMPORTANT SAFETY INSTRUCTIONS

The safety of electrical appliances from FIRST Austria complies with the recognized technical directives and legal regulations for safety. Nevertheless, you and the other users of the appliance should observe the following:

• Please read these instructions carefully before using this appliance for the first time and keep them for further reference.
• This product has not been designed for any other uses than those specified in this manual.
• Before connecting the appliance to the power source, check if the voltage indicated on the appliance corresponds with the mains voltage in your home. If this is not the case, contact your dealer and do not use the appliance.
• If the appliance is grounded (protection class I), the wall outlet and any extension to which it is connected must also be grounded.
• Do not operate or place any part of this appliance on or near any hot surface (such as gas or electric burner or a heated oven).
• Keep the back of the unit at least 30 cm away from walls or objects to ensure free airflow.
• To protect from electrical hazard, do not immerse this appliance or cordset in any liquids.
• If the appliance or the power cord shows any signs of damage, do not operate it! Take the product to an authorized and qualified service center for inspection or repair.
• The ventilation openings must be kept free.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not operate the appliance with wet hands.
• This device is intended for home use only, do not use it commercially.
• Do not use this appliance outdoors.
• Do not leave the appliance unattended while it is operating.
• Never put your fingers or any object through the protective grille or ventilation holes of the appliance.
• Do not use the appliance in the immediate vicinity of water sources such as bathtub, shower, washbasin or swimming pool.
• Always disconnect the appliance from power after use, before cleaning and in the event of a malfunction.
• Unplug the appliance before moving it from one location to another.
• Do not pull directly on the power cord, rather pull on the plug to disconnect the appliance from the power source.
• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years.
• We are excluded of liability for all damages that may arise if the appliance is used for purposes other than originally intended or if it is used inappropriately.
• Repairs and other work undertaken on the unit must only be done by authorised specialist personnel!

OVERVIEW (Fig. A)

1. Control panel
2. Display
3. Pedestal
4. Timer and temperature display
5. Fan speed level
6. Mode indicator
7. Oscillation indicator

SCOPE OF DELIVERY

• Tower fan
• Pedestal
• Remote control
• Instruction manual

FEATURES

• LED Display
• 3 fan speed levels
• Different modes
• Temperature display
• Timer function
• Oscillation function (Approx. 50°)

ASSEMBLY INSTRUCTIONS

• First assemble the two halves of the pedestal. Then pass the power cord through the hole in the center and mount the pedestal to the fan. Make sure that you lead the cable through the cable entry.
• Then fix the pedestal to the fan using the mounting screws.
• Use a CR2025 (3 V) battery for the remote control.
• Make sure that the positive pole is facing up when inserting the battery. (Fig. B)

OPERATING INSTRUCTIONS

Place the fan on a dry, level and stable surface. Connect the power cord to a suitable power outlet.

• ON/OFF:
  Press the [ON/OFF] button to switch the fan on or off.

• SPEED selection:
  Press the [SPEED] button repeatedly to switch between fan speed levels 1, 2 and 3.

• TIMER function:
  Press the [TIMER] button repeatedly to set an auto-off timer. The Timer can be set from 0 to 12 hours in 1h steps. Selecting 0 deactivates the timer.

• OSCILLATION function:
  Press the [OSC] button to start or stop the oscillation function.

• MODE SELECTION
  Press the [MODE] button repeatedly to switch between “Normal”, “Natural” and “Sleep” mode.

  • “Normal” mode:
    The fan rotates constantly at the set speed.

  • “Natural” mode:
    The fan speed varies in this mode to simulate a natural wind behaviour.

  • “Sleep” mode:
    In this mode the fan speed varies to simulate a natural wind behaviour and the speed level decreases every 30 minutes until it is at level 1 (assuming the mode starts at a higher level). The display goes into standby mode after 15 seconds.

CLEANING & MAINTENANCE

• Always unplug the appliance from power before cleaning, assembly or disassembly.
• Never immerse the appliance or power cord in water. Do not let the electrical parts come into contact with moisture.
• Wipe the heater with a soft damp cloth.

TECHNICAL SPECIFICATIONS:

• 220-240 V
• 50-60 Hz
• 40 W

Environment friendly disposal
You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>