INSPIRE TM3.1 Motorized Treadmill User Manual

INSPIRE TM3.1 Motorized Treadmill

Product Information

TREAD 3 MOTORIZED TREADMILL

Specifications

• Model: TM3.1
• Manufacturer: Health in Motion LLC
• Country of Origin: China
• Serial Number: [Recorded on the product]

Introduction:

Welcome to the Inspire Fitness Family! The Tread 3 motorized treadmill is designed to help you achieve a healthier and stronger body. Regular training on this treadmill can provide numerous benefits, including increased muscle tone, decreased body fat, improved energy levels, and reduced stress. Congratulations on taking the first step towards improving your self-image, overall health, and quality of life.

Before Assembling Your Tread 3:

It is crucial to read the entire user manual before attempting to build or use the treadmill. The manual provides step-by-step instructions for proper assembly. Before starting the assembly process, make sure to check the parts list included in the manual to ensure that all components are accounted for. If any parts are missing, please contact Inspire Fitness Support through email, phone, or chat for replacement parts.

Note: The Tread 3 treadmill is intended for indoor, home use only. It is important to prevent the formation of rust on certain parts by avoiding humid environments, as rust can impair the machine’s function.

Contact Information

If you require any assistance with your Tread 3 treadmill, it is recommended to seek help from an Inspire Fitness Authorized
Servicer. Only authorized servicers can perform service on the treadmill without voiding the warranty. If you need help finding an Inspire Fitness Authorized Servicer, you can contact the company directly through the following channels:

• Email: Hello@centr.com
• Phone: +1 877-738-1729 (US Only) or +1 714-738-1729 (Global) –
• Mon-Fri 8 am-5 pm PT – UTC-7h/8h
• Chat: www.inspirefitness.com

Please refer to the provided user manual for a comprehensive table of contents. The manual contains essential information and instructions for safe and efficient use of the Tread 3 treadmill.

Important Safety Instructions:

Please follow these important safety instructions to ensure your safety and the proper functioning of the treadmill:

1. Consult your physician before beginning any exercise program.

2. Never leave the treadmill unattended when plugged in. Always unplug it from the electrical outlet when not in use or before performing service or maintenance.

3. Do not operate the treadmill while covered with a blanket, plastic, or anything that obstructs airflow. This can cause excessive heating, leading to fire, electric shock, or injury.

4. Keep children and pets away from the treadmill at all times.
   Never leave children unattended in the same room as the treadmill.

5. Only one person should use the treadmill at a time.

6. Use the treadmill only for its intended purpose as described in the manual. Do not use any attachments that are not recommended by Inspire Fitness.

7. Do not operate the treadmill if it has a damaged power cord or electrical plug, is not working properly, or has been exposed to water or moisture.

FAQ (Frequently Asked Questions):

Q: Can I use the Tread 3 treadmill outdoors?

• A: No, the Tread 3 treadmill is designed for indoor, home use only.

Q: What should I do if any parts are missing during assembly?

• A: If you are missing any parts, please contact Inspire Fitness Support through email, phone, or chat to request replacement parts.

Q: Can I leave the treadmill plugged in when not in use?

• A: It is recommended to unplug the treadmill from the electrical outlet when not in use to ensure safety and energy efficiency.

Q: How often should I service my Tread 3 treadmill?

• A: Service of the treadmill should only be performed by an Inspire Fitness Authorized Servicer as mentioned in the user manual. Regular maintenance and servicing are crucial to keep the treadmill in optimal condition.

CONGRATULATIONS

• Welcome to the Inspire Fitness Family. You’ve just taken the first step to a healthier and stronger body. This Tread 3 motorized treadmill by Inspire Fitness offers the key to unlocking your body’s potential. Regular training on a Treadmill has been shown to deliver a host of benefits including: increased muscle tone, decreased body fat, improved energy levels, and a reduction in stress. Congratulations, you are on your way to improving your self image, overall health, and quality of
  life.

BEFORE ASSEMBLING YOUR TREAD 3

• IMPORTANT: Read this entire manual before attempting to build or use this machine. This manual contains step by step instructions for proper assembly.
• Use the parts list included in this manual to verify that all parts are accounted for before assembly. If any parts are missing, contact Inspire Fitness Support for replacement parts through email, by phone or through chat.
• This Inspire Fitness Tread 3 Treadmill is intended for indoor, home use only. Rust can form on certain parts in a humid
  environment, resulting in impaired function.

CONTACT US FOR HELP

• Service of your Tread 3 Treadmill should only be performed by an Inspire Fitness Authorized Servicer. Service performed by anyone else can result in loss of warranty. If you need help finding an Inspire Fitness Authorized Servicer, please contact us directly:

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

• This treadmill is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment.
• WARNING: Before using this treadmill, all users must read, understand, and carefully follow all warnings, instructions, and procedures on the treadmill and in this User Manual.
• DANGER: To reduce the risk of electrical shock, always unplug this treadmill from the electrical outlet before cleaning or attempting any maintenance activity.
• WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Consult your physician before beginning any exercise program.
2. The treadmill should never be left unattended when plugged in. Unplug from outlet when not in use, and before service or maintenance.
3. DO NOT operate the treadmill while being covered with a blanket, plastic or anything that insulates or stops airflow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
4. Always keep children and pets away from the treadmill. DO NOT leave children unattended in the same room with the treadmill.
5. Only one person at a time should use the treadmill.
6. Use the treadmill only for its intended use as described in this manual. DO NOT use attachments not recommended by Inspire Fitness.
7. Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working properly, if it has been dropped or damaged, or partially immersed in water. Contact Inspire Fitness customer service.
8. Keep the power cord away from heated surfaces. Do not pull the treadmill by the power cord or use the cord as a handle. Do not run the power cord under or along the side of the treadmill.
9. Never operate the treadmill with the air openings blocked. Keep air openings free of lint, hair or any obstructing material.
10. Never insert objects into any openings in this treadmill. If an object should drop inside, turn off the power, unplug the power cord from the outlet and carefully retrieve it. If the item cannot be reached, contact Inspire Fitness customer service.
11. Do not use this treadmill outdoors, near water, while wet, or in areas of high humidity.
12. Do not use this treadmill in areas where aerosol spray products are being used or where oxygen is being administered. Such substances create the danger of combustion and explosion.
13. To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.
14. Connect this treadmill to a properly grounded outlet only. See Grounding Instructions, page 8.
15. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
16. This treadmill is intended for consumer home use only. Do not exceed maximum user weight of 300 lbs (136 kg).
17. Inspect the treadmill for incorrect, worn, or loose components and then correct, replace, or tighten prior to use.
18. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other loose clothing that could become caught in the treadmill. Running or training shoes are also required when using the treadmill.
19. Care should be used when mounting or dismounting the treadmill.
20. Read, understand, and test the emergency stop procedures before use.
21. Keep hands away from all moving parts.
22. Keep the top side of the moving surface clean and dry.
23. Disabled persons should not use the machine without a qualified person or physician in attendance.
24. Before using the machine to exercise, always do stretching exercises to properly warm up.
25. Position the treadmill on a flat and solid surface, and do not block any openings or vents in the floor.
26. DO NOT place any sharp objects around the machine.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. Health In Motion, LLC. DOES NOT ASSUME ANY RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SPACE REQUIREMENTS

This treadmill requires a minimum amount of floor space to safely operate. Keep a minimum open area of 78” (2m) behind the treadmill, and 20” (0.5m) on both sides.

USE OF SAFETY KEY

• This treadmill is designed with a non-removable Safety Key and the treadmill will not operate if the Safety Key is pulled out in the STOP position. The console display screen will reset once the Safety Key is pushed back in place.
• WARNING: The Safety Key red clip should be attached to the user’s clothing directly in front of the Safety Key. In case of emergency, pull out the Safety Key to immediately stop the belt and shut off the treadmill.

GROUNDING INSTRUCTIONS

• This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This treadmill is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the treadmill, if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
• This treadmill is intended for use on a nominal 100-120V circuit and has a grounding plug that looks like the plug illustrated above. Make sure the treadmill is connected to an outlet have the same configuration as the plug. No extension cord or adapter should be used for this treadmill.

POWER REQUIREMENTS

WARNING:

1. This treadmill requires a power source of 15 Amps (100 – 120V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging in the treadmill. Any power source above or below this grade could cause significant damage to the treadmill and or user.
2. Never use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill, including the elevation mechanism and transport wheels.
3. Never operate the treadmill using a generator or UPS power supply.
4. Never remove any cover without first disconnecting AC power.

WARNING AND SERIAL NUMBER LABELS

ASSEMBLY HARDWARE KIT

It is recommended to have at least 2 people for unboxing and assembling the treadmill.
STEP 1
Remove the treadmill base from the carton and place it on flat ground. Cut the packing strap that connects the treadmill deck to the lift mechanism.

STEP 2

• Lift the Left (4) and Right (5) Upright tubes and set into place in treadmill base (2). Secure with two M10x20mm screws (96), using the 6mm Hex Key (119). Use caution when lifting the uprights as the Console assembly (8) is loose.
• DO NOT TIGHTEN THE HARDWARE AT THIS TIME.

STEP 3

• Rotate the Console assembly (8) so it is in a horizontal position and secure to the Left (4) and Right (5) Upright tubes with two M8x20mm screws (97). Fully tighten screws (96) and (97) from STEP 2 and STEP 3 using the Hex Key (119).

STEP 4

• Attach the Left (29) and Right (33) Upright Inner Covers to the Left (4) and Right (5) Upright tubes by pressing them into place.

STEP 5

• Install the water bottle holders (53) and tablet holder (36) onto the Left (4) and Right (5) Upright tubes and Console assembly (8). Connect the power cord to a grounded outlet and power on the treadmill with the On/Off switch.

FEATURE OVERVIEW

BEFORE YOU BEGIN

This treadmill is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment.
WARNING: Before using this treadmill, all users must read, understand, and carefully follow all warnings, instructions, and procedures on the treadmill and in this User Manual. The user is required to perform a complete visual inspection, and test of the features and functions of the assembled treadmill prior to use.

CAUTION:

1. To avoid injury, use extreme caution when stepping onto or off of a moving belt.
2. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the console. The speed will increase gradually.
3. While on the treadmill, move with caution as distractions may cause you to lose balance and stray from walking in the center of the belt, which may result in serious injury.
4. The treadmill starts at very low speed. To begin use, hold onto the handrails and stand on the side platforms while it starts up, then step onto the belt once it’s in motion.
5. Always hold the handrail when changing settings on the console.

CONSOLE OVERVIEW

• NOTE: The console control keys are precisely set and require very little finger pressure to use. To avoid damaging these keys, do not use excessive pressure when operating these controls.
• For the best performance of the touch buttons, regularly clean the console surface.
• START / PAUSE: Push this button to START a workout. The console will do a 3-second countdown and then the belt will begin to move. When the belt is moving, push the button again to PAUSE your workout.
• When in PAUSE, both SPEED and INCLINE will change to 0. Press again to exit PAUSE and resume your workout.
• STOP: Push this button at any time to STOP the workout. If in the PAUSE state, push the STOP button to enter the STANDBY state.
• INCLINE ADJUSTMENT: Press the 2, 4, 6, or 8 INCLINE preset button to directly move to that INCLINE running grade. Use the +/- buttons to adjust the INCLINE between 0 and 12. Hold either the + or – key for 0.5 seconds to quickly change the INCLINE.
• SPEED ADJUSTMENT: Press the 2, 4, 6, or 8 SPEED preset button to directly move to that SPEED. Use the +/- buttons to adjust the SPEED between 0 and 10mph / 16kph. Hold either the + or – key for 0.5 seconds to quickly change the SPEED.
• The default speed and distance units are mph/miles but can be set to kph / km. To change between the two, hold down the “8” Incline button and the “8” Speed button at the same time for 2 seconds until you hear a beep.

CONSOLE MODES

• INITIAL POWER ON: After the On/Off power switch is turned on, all segments and icons on the Console will light up for 2 seconds, then it will enter the STANDBY state.
• STANDBY: INCLINE and SPEED will both be set to 0 and the HR circle will blink yellow for 1 minute as it searches for a HR device. If after 5 minutes of no activity, the backlight with flash Green for 30 seconds. After 5 more minutes of no activity, the backlight will flash Green for 30 seconds before entering the SLEEP state, and all console lights will turn off.
• RUNNING: When in the STANDBY state, press the START / PAUSE button to begin your workout. The console will do a 3-second countdown and then the belt will begin to move at the minimum SPEED of 1.0 mph. Press the STOP button to end your workout and the PAUSE button to enter the PAUSE state.
• Note: After 1 minute, if the belt is moving and the motor does not detect a user on the belt, it will automatically exit RUNNING mode and enter STANDBY.
• The light around the perimeter of the console will show 3 different colors based on the current speed of the treadmill (see images below).
• PAUSE: In the PAUSE state, the INCLINE and SPEED with both be set to 0. Push the START / PAUSE button to resume your workout and STOP to end your workout and enter the STANDBY state. The workout will resume at a speed of 1.0 mph/kph.
• SLEEP: This state is to save power when not using the treadmill. Press any key on the Console to exit the SLEEP state and return to the STANDBY state.

HEART RATE DEVICE

• This console will connect to the optional HR chest strap or any other similiar device that uses the BLE protocol. When first turning on the treadmill, the circle around the HR metric will blink orange for 1 minute while it searches for a signal. If at any time a signal is found, the Heart icon will turn on, the Heart BPM will be shown, and the circle will display a different color based on the BPM range.

FOLDING AND MOVING INSTRUCTIONS

• This treadmill is designed to be folded when not in use, to save floor space and allow for easy transport.

FOLDING

• Before folding the treadmill, ensure that the Incline is set to 0, the Power switch is in Off position, and the power cord is removed from the outlet.

UNFOLDING

• Before unfolding the treadmill, ensure that the floor space under the treadmill is free of any objects.

MAINTENANCE & CARE

• General cleaning will help prolong the life and performance of the treadmill.
• Keep the treadmill clean and maintained by dusting the components regularly.
• Clean the side platforms and the visible portion of the running deck to prevent debris from accumulating underneath the running belt. Debris under the running belt will degrade the performance and prematurely wear out the running belt and deck.
• Keep your running shoes clean so that debris does not accumulate underneath the running belt.
• Clean the surface of the running belt with a clean damp cloth.
• Regularly inspect the product for loose hardware.
• The moving parts should turn freely and quietly. Abnormal moving parts will affect the safety of the equipment.
• To prolong the treadmill life, it is suggested that the product be powered off for at least 10 minutes for every 2 hours of use.
• Power off the treadmill when not in use.
• It is recommended to place the treadmill on a qualified treadmill mat that is slightly larger than the treadmill base.
• This will help protect your product from accumulating dust, debris, and carpet fibers which can affect the performance and longevity of your treadmill.

ADJUSTING THE RUNNING BELT

• The running belt is properly adjusted at the factory but may loosen or change over time. It is important to properly adjust the running belt so it has the right tension and is centered on the deck, without drifting to one side.

RUNNING BELT TENSION

• To check the running belt tension, pull up on the running belt in the middle of the running surface, and the running belt should lift off the running deck between 2-3 inches. If the running belt is too tight, this will negatively affect the motor’s performance and also create more friction between the roller and the running belt. When the running belt is too loose, it may not move smoothly with the motor.

RUNNING BELT CENTERING

• To check the centering of the running belt, set the Incline to 0 and set the Speed to 3.0 mph. Watch the belt to see if it moves to the left or right on the running deck. If properly centered, the belt should be centered on the running deck and the side platforms. If the running belt is not properly centered, this will cause premature running belt failure.
• To adjust the running belt tension or centering, use the included Allen wrench and use this table to know which adjustment screw to turn. Repeat the steps given in the table until it is properly adjusted.

LUBRICATING THE RUNNING BELT

IMPORTANT NOTE: This treadmill does come pre-lubricated from the factory, but it is recommended to check your running belt and deck before first use as the silicone oil can dry over time. If the running belt and deck appear dry, then follow the steps below.
Lubricating the running deck and belt is essential as the friction between the two affects the life span and function of the treadmill. Therefore, it is suggested that the running belt and deck be inspected regularly.
WARNING:: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.
Follow these instructions to lubricate the running belt and deck:

1. Attach the extension tube to the bottle of lubricant. This extension tube allows you to evenly apply lubricant across the entire width of the running belt and deck.
2. Raise the running belt up on one side and evenly apply lubricant across the width of the running deck. Ideally, the lubricant should be applied where the feet contact the deck when running, as this is where it is most needed. Use a rag to thoroughly wipe the lubricant over the running deck. Repeat this process to the other side.

RECOMMENDED LUBRICATION SCHEDULE

LIGHT USE (LESS THAN 3 HOURS / WEEK)| EVERY 6 MONTHS
MEDIUM USE (3 – 5 HOURS / WEEK)| EVERY 3 MONTHS
HEAVY USE (MORE THAN 5 HOURS / WEEK)| EVERY 2 MONTHS

TROUBLESHOOTING

When the treadmill electronics detect a problem or a potential problem, the HR window in the center of the console will display one of the Error Codes in the following table.
WARNING:: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.

damaging the motor, the system will restart.

2.       A part of the treadmill is stuck, causing a motor to shut off. Check for parts that are not moving normally and also try adding running belt lubrication.

3.       If you smell burning when the motor runs, or an unusual motor sound, the

the motor may need replacement.

4.       The motor control board may need replacement.

E02 – Motor Hall Sensor Error| 1.       Check that the motor cable is properly connected.

2.       Replace the motor or motor control board.

E03 – Motor Control Board Overcurrent| 1.       Motor current exceeds load rating. To prevent damaging the motor, the system will restart.

2.       Check that the power cord and motor connection are properly connected.

3.       Replace the motor control board.

E04 – Phase Loss| 1.       Check that the motor cable is properly connected.

2.       Replace the motor.

3.       Replace the motor control board.

E05 – Undervoltage| 1.       Check that the input power supply voltage is normal.

2.       Check if the power cord is loose.

E06 – Overvoltage| 1.   Check that the input power supply voltage is normal.
E08 – Motor Control Board Error| 1.       Check that the power cord and motor connection are properly connected.

2.       Replace the motor control board.

E16 – Incline Adjustment Error| 1.       Check that the incline adjustment motor cable is properly connected.

2.       Reset the power using the On/Off switch.

3.       Re-calibrate the incline motor.

E17 – Lift Motor Calibration Error| 1.       Check that the incline adjustment motor cable is properly connected.

2.       Re-calibrate the incline motor.

E21 – Motor Control Board Save

Data Exception

| 1.       Turn off the power using the On/Off switch.

2.       After 3 minutes, turn the power ON. If the motor control board fails to start, replace the motor control board.

WARNING:: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.

Check that the cable between the console board and the motor control board is

properly connected.

2.       Check if the console or motor control board is damaged.

3.       Turn off the power using the On/Off switch.

4.       After 2 minutes, turn the power ON.

E31 – Overtemperature| Wait until the machine temperature is normal before continuing to use.
E32 – Motor Reversal| Check that the motor cable UVW is properly connected.
E33 – Issue with Motor or Motor

Control Board

| 1.       Replace the motor.

2.       Replace the motor control board.

E40 – The Safety Key Not In Place| 1.       Check if the Safety Key is loose or removed.

2.       Check that the Safety Key moves free into place.

3.       Check if the Safety Key is damaged.

4.       Check if the console is damaged.

E50 – Other Error| Please contact customer service.

INCLINE MOTOR CALIBRATION

• The treadmill has a separate motor to adjust the Incline running grade. If you see Error Code E16, or if the console has had a firmware update, the Incline motor needs to be recalibrated.
• To perform this recalibration, simply hold down these 4 buttons for 2 seconds: INCLINE +, INCLINE -, SPEED +, SPEED -. The Heart Rate window will show “CAL” and the Speed window will show the incline motor calibration value. Allow the calibration to continue until complete. Note: Do not stand on treadmill during this process as it may affect the calibration.

PRODUCT WARRANTY

To view full warranty details, or to register your product for warranty, visit inspirefitness.com/support

AUSTRALIA

• Our goods come with guarantees that cannot be excluded under the Australian Consumer. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

• Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled to:

• to cancel your service contract with us; and

• to a refund for the unused portion, or to compensation for its reduced value.

• You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.

• www.inspirefitness.com

• EmailHello@centr.com

• Phone +1877-738-1729 (US Only)

• +1714-738-1729 (Global)
  Mon-Fri 8 am-5 pm PT – UTC-7h/8h

• Support is provided in English and Spanish

• Chatwww.inspirefitness.com

References

• Contact Us | Inspire Fitness
• Inspire Fitness | High Quality Fitness Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>