inspire ZYTH1801 Minta Lighting System Instruction Manual
- June 1, 2024
- iNSPIRE
Table of Contents
inspire ZYTH1801 Minta Lighting System
Product Information
Specifications
- EAN CODE: 3276007144581/3276007144574
- Model: ZYTH1801-10-OEGLD2-A60-WW-M-C / ZYTH1801-10-OABK2-A60-WW-M-C
- Manufacture Date: 2021/08-V01
- Rated Voltage: 30V
- Rated Power: 3.6W
- IP Protection Rating: IP44
- Transformer: Class II, INPUT 220-240V~50/60Hz, OUTPUT 30V, 200mA
- Replacement Lamp: 30V Max. 0.6W
Product Usage Instructions
- Keep batteries out of reach of children and animals.
- Avoid short-circuiting or damaging the batteries.
- Do not connect parts of this light string with parts from other light strings.
- Avoid exposing the product to direct heat, flames, or water.
- Use only specified accessories to prevent bodily harm.
Environmental Protection
- Do not dispose of batteries in fire or water.
- Properly recycle them at designated collection points.
FAQ
- Q: Can this product be used outdoors?
- A: Yes, this product is suitable for both indoor and outdoor use.
- Q: What should I do if a battery is swallowed?
- A: Consult a doctor immediately if a battery is swallowed by a child or animal.
- Q: How should I clean the product?
- A: Use a damp cloth for cleaning and avoid using unapproved accessories to prevent injuries.
Thank you for purchasing this product. We recommend that you read the installation, user and maintenance instructions carefully. We have designed this product to ensure your complete satisfaction. If you require assistance, the team at your retailer is on hand to help you.
included
- Caution danger
- Power off
- Power up
- Legal & Safety Instructions
- Assembly
- Use
Keep the batteries out of the reach of children. There is a risk of children
or animals swallowing them.
Consult a doctor immediately if a battery is swallowed
Warning symbols
| Read the instructions carefully.
---|---
| Safety Class II. This lamp is doubly insulated and may not be wired to a
protective conductor
| Class III light The light uses a very low current
General Safety Instructions
Read this instruction manual thoroughly before using the appliance and save it
for future reference and if necessary pass the instruction manual on to a
third party.
WARNING: When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electrical shock and
personal injury.
General
- Keep devices out of reach of children and unauthorised persons.
- Check if the electrical specifications of this luminaire are compatible with your installation.
- WARNING: The power supply must be deactivated before assembly, maintenance or cleaning processes. Remove the fuse or switch the fuse to OFF and secure it from reactivation.
- WARNNG: Remove the insulating strip from the remote controller before use. The remote controller contains a button cell battery. Dangerous if swallowed.
- In case of any defective bulbs, plug out this luminaire immediately. Exchange the defective bulbs with the same type of filaments.
- Do not remove or insert lamps while the chain is connected to the supply. For indoor and outdoor use.
- Do not interconnect parts of this lighting chain with parts of another manufacturer’s lighting chain.
- Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed off before use. Use only the supplied transformer, and ensure the transformer has adequate ventilation.
- This luminaire is not a toy.
- This liminaire is not suitable for illumination, but for decoration only.
- Do not expose to direct heat, flame, or submerse in water.
- Do not connect the chain to the supply while it is in the packing.
- Ensure that all lampholders are fitted with a lamp.
- This product contains a light source of energy efficiency class
- To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
Electrical safety
WARNING: the external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. THIS LIGHTING CHAIN MUST NOT BE USED WITHOUT ALL GASKETS BEING IN PLACE.
Specific Safety Rules
- Ensure the correct polarity of the batteries, this is indicated in the battery compartment.
- Never throw batteries into fire or water The light string can be electrically connected only by the same type of our brand items and extended to a maximum of 8 strands.
Environmental protection
CAUTION!
- Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal under local regulations. Contact your local authorities or stockists for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection service.
- Batteries must be recycled or disposed of properly. Do not dispose of batteries in regular trash, municipal waste stream or by fire, as batteries may leak or explode. Do not open, short circuit or mutilate batteries as injury may occur.
Appliance Specifications
TECHNICAL CHARACTERISTICS
Rated voltage| 30V
Rated wattage| 3.6W
Ambient Temperature| 25°C
Protection class| Class III
IP number| IP 44
Transformer| ClassII,INPUT:220-240V~50/60Hz OUTPUT: 30V ,200mA
Replacement lamp| 30V Max. 0.6 W.
Maintenance / Cleaning
- Disconnect from mains before maintenance or cleaning.
- The replaceable LED FIlament is fragile and can be easily broken if handled incorrectly. Ensure that your FIngers do not make contact with the lower section where the Yellow FIlaments are FItted.
- Grip the solid upper section of the FIlament assembly and gently apply a backwards/forward movement with your FIngers whilst pulling downwards to remove.
After removing the old FIlament replace it with a new one by inserting it into the socket, as with removal only grip the solid upper section during installation.
WARNING: The use of any accessory not specified in this manual may present a risk of personal injury.
Others (Service, Repairing, Guarantee, etc.)
- This electric product is under the relevant safety requirements.
- Repairs should only be carried out by qualified persons using original spare parts, otherwise, This may result in considerable danger to the user.
- Please contact the store from which you bought the product for after-sale services if any.
- The product is a SELV class III lamp with an approved class II LED driver.
What In The Box
Assembly
USE
CONTACT
ADEO Services – 135 Rue Sadi Carnot – CS 00001 59790 RONCHIN – France
- ТОВ «State of the Nation», вул. May 17, м. Box 04201, South Africa
- Imported and distributed by LEROY MERLIN
- CIA BRAZILIAN DIY
- Sundays Street Gallery Blotta, 315 – Interlakes – CEP 04455-360 São Paulo – SP – Brazil CNPJ: 01.438.784/0001-05
- CALM (Leroy Merlin Outreach Center) -4020.5376 (capitals) and 0800.0205376 (some regions)
Imported by Adeo South Africa (PTY) LTD T/A Leroy Merlin Leroy Merlin Greenstone Store – Corner Blackrock Street and Stoneridge Drive, Greenstone Park Ext 2, Edenvale, 1610 Johannesburg, Gauteng, South Africa
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>