Inspire 501-100GL_CH Accent Table Instruction Manual
- June 1, 2024
- iNSPIRE
Table of Contents
ASSEMBLY INSTRUCTIONS
Congratulations on your purchase — Get ready to be inspired!
Please check to ensure that all parts are included. Contact place of purchase for any service issues. Keep this document for reference in case parts are needed.
IMPORTANT
MUST READ BEFORE ASSEMBLY!
FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE.
BASIC ASSEMBLY TECHNIQUES
Before attaching each of the screws, make sure that the smaller lock washer is between the larger washer and the head of the screw.
Position each part correctly and insert all screws into their respective holes. Then, hand-tighten only until 70% tight. Complete tightening with the tools will come at a later step.
Make sure the furniture rests on a flat and level surface with each leg evenly touching the ground. Use a soft blanket or carpet underneath when turning the piece on its side.
Some furniture come with optional height adjustment knobs underneath each leg. Turn this knob counterclockwise to raise the leg level or clockwise to lower the leg level.
Finally, make sure all parts are properly aligned then use the included tools to completely tighten the screws. Your furniture is now ready for use.
Store the tools for later maintenance. Tighten the screws again after two (2) weeks , and then at least once every six (6) months after that.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE SCREWS MAY LOOSEN OVER TIME AND CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS CAN LEAD TO COLLAPSE AND CAN CAUSE SERIOUS INJURY.
FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.
SYLAS 501-100GL_CH
ASSEMBLY INSTRUCTION