Watchguard MAGLOC200S Electro Magnetic Gate Lock Instructions
- June 15, 2024
- Watchguard
Table of Contents
MAGLOC200S
ELECTRO-MAGNETIC GATE LOCK
MAGLOC200S Electro Magnetic Gate Lock
WIRING INSTRUCTION: READ CAREFULLY
- For 12V:Connect the red/black wires,green/orange wires and connect to 12V source.
- For 24V:Short black/green wires and connect red and orange ones to 24V source.
- Lock status sensor
NOTE:
- Reed switch dry contacts are rated max 3W (max switching contact 0.25A) at 30VDC/AC for safe operation.Do not exceed this rating.
- Varistor(TNR) should be placed as directed.
- Before installing, add the threadlocker to all screws.
Firmly tighten the screws to avoid loosening.
MAGLOC200S
Documents / Resources
|
Watchguard MAGLOC200S Electro Magnetic Gate
Lock
[pdf] Instructions
MAGLOC200S Electro Magnetic Gate Lock, MAGLOC200S, Electro Magnetic Gate Lock,
Magnetic Gate Lock, Gate Lock, Lock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>