Dongguan GY-Q10B-B06002 3-In-1 Wireless Charging Station User Manual
- June 4, 2024
- Dongguan
Table of Contents
Dongguan GY-Q10B-B06002 3-In-1 Wireless Charging Station
Interpretations with graphs
Thanks for choosing us!
This is a 3 in1 wireless charger that allows you enjoy the fun of digital
products easily.
Please kindly read the user manual before using and keep it for future
reference.
Instructions
Method of operation
- Connect the wireless charger and adapter, plug in the power supply;
- Place the devices to be charged in the corresponding charging position, then it will start charging
Product parameters
- Input:5V=3A; 9V==3A ;12V=2.25A
- Output: Phone
- Watch 5-15W 2.5W
- Earphone 2.5W
TIPS
- Do not disassemble or throw into fire or water to avoid causing a short circuit.
- Do not use wireless charger in extremely hot, humid or corrosive environment.
- Do not use near magnetic bank card or IC card to avoid malfunctioning.
- Keep out of reach of children and pets.
- The images in this manual are sketch drawing of actual product. only, actual product might be slightly different.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to Operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>