COMMSCOPE MUK-SFK1L Large Leg Tie Back / Stiff Arm Kit Owner’s Manual
- June 15, 2024
- CommScope
Table of Contents
- GENERAL NOTES
- DESIGN NOTES
- MANUFACTURING/SPECIAL REQUIREMENTS
- TEST
- PLAN VIEW TIE BACK ASSEMBLY ADAPTER FOR ANGLE
- PLAN VIEW TIE BACK ASSEMBLY WITH ADAPTER FOR PIPE
- THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR ANGLE
- THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR PIPE
- ROUND TOWER LEG ATTACHMENT DETAIL
- ANGLE TOWER LEG ATTACHMENT DETAIL
- ADAPTER FOR PIPE CONNECTION
- Documents / Resources
COMMSCOPE MUK-SFK1L Large Leg Tie Back / Stiff Arm Kit Owner’s Manual
GENERAL NOTES
ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED
PLAN VIEW TIE BACK ASSEMBLY ADAPTER FOR ANGLE
PLAN VIEW TIE BACK ASSEMBLY WITH ADAPTER FOR PIPE
| COMMSCOPE, INC. OF NORTH CAROLINA|
---|---|---
TOLERANCES1 PLACE .Xl.X1± 5[0.2] 3
PLACE.XXXV1 ± 1.50[0.060]2 PLACE .XX[.X] ± 3.0[0.12]
ANGLES ± 2°| SAP MATERIAL MASTERMUK-SFK1L|
FINISH| MATERIAL|
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHESINTERPRET PER ANSI Y
14.5M-1994| | NAME| DATE| TITLETIE BACK ASSEMBLY FOR LARGER LEG|
CE| JL1183| 24AUG23
RW| JL1183| 08/31/2023
DENSITY
MASS
VOLUME
SURFACE AREA| lbs/in3 102.96 lbs366.44 in’3213.33
in2
| |
AD| YC1015| 09/12/2023
SCALE1:15| DOCUMENT NO.MUK-SFK1L|
RE| JL1183| 09/19/2023
ECN 40177353CM0
HEIGHT
LENGTH
WIDTH| (20.0[508])(120.0[30481)(12.0[305])| SIZE| Auth Group INSL| MODEL|
DRAWING| SHEET1 OF 2|
| | | VERSION| STATUS| REVISION| VERSION| STATUS| REVISION
00| RE| A| 00| RE| A
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT
THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR ANGLE
| ITEM NO. | PART NUMBER | DESCRIPTION | QTY. | WEIGHT | NOTE NO. |
|---|---|---|---|---|---|
| _ 1 | PST2375.10 | PIPE. TIE BACK | 1 | 36.63 LBS | |
| 2 | BP8625-19625-00 | BENT PLATE..375 X 4.38 X 19.63 | 1 | 17.18 LBS | |
| 3 | BP11125-19625-00 | BENT PLATE..375 X 5.25 X 19.63 | 1 | 22.61 LBS | |
| 4 | MTC4104-0014 | BENT PLATE..375 X 6 X 6.88 | 1 | 5.24 LBS | |
| 5 | MTC4104-0031 | BENT PLATE | 1 | 1.15 LBS | |
| 6 | GUB-53050 | 5/8′ X 3′ X 5′ GALV U-BOLT KIT | 2 | 1.09 LBS | INCLUDES U-BOLT. |
FLAT WASHERS, LOCK
WASHERS AND NUTS
7| MT-382-18| 518″ X 18* GALV THREADED ROD| 2| 1.55 LBS|
8| GB-0520A| 518. X 2′ GAIN BOLT KIT (A325)| 2| 0.26 LBS| INCLUDES BOLT.
LOCK WASHER AND NUT
9| GB-0542A| 5/8′ X 4-1/4′ GAIN BOLT KIT| 1| 0.46 LBS| INCLUDES BOLT. LOCK
WASHER AND NUT
10| GWF-05| Mr GALV FLAT WASHER. 1.700| 7| 0.06 LBS|
11| GWL-05| 5/8′ GALV LOCK WASHER| 4| 0.03 LBS|
12| GN-05| 5/8′ GALV HEX NUT| 4| 0.08 LBS|
THE BOM OF TIE BACK ASSEMBLY ADAPTER FOR PIPE
| ITEM NO. | PART NUMBER | DESCRIPTION | OTY. | WEIGHT | NOTE NO. |
|---|---|---|---|---|---|
| 1 | PST2375-10 | PIPE, TIE BACK | 1 | 36.63 LBS | |
| 2 | BP8625-19625-00 | BENT PLATE, .375 X 4.38 X 19.63 | 1 | 17.18 LBS | |
| 3 | BP11125-19625-00 | BENT PLATE, .375 X 5.25 X 19.63 | 1 | 22.61 LBS | |
| 4 | MTC4104-0014 | BENT PLATE, .375 X 6 X 6.88 | 1 | 5.24 LBS | |
| 5 | MTC4104-0031 | BENT PLATE | 1 | 1.15 LBS | |
| 6 | GUB-53050 | 5/8. X 3′ X 5′ GALV U-BOLT KIT | 2 | 1.09 LBS | INCLUDES U-BOLT. |
FLAT WASHERS. LOCK
WASHERS AND NUTS
7| MT-382-18| 5/8′ X 18′ GALV THREADED ROD| 2| 1.55 LBS|
8| GB-0520A| 5/8′ X 2′ GALV BOLT KIT (A325)| 2| 0.26 LBS| INCLUDES BOLT, LOCK
WASHER AND NUT
9| GB-0542A| 5/8′ X 4-1/4′ GALV BOLT KIT| 1| 0.46 LBS| INCLUDES BOLT, LOCK
WASHER AND NUT
10| GWF-05| 5/8′ GAIN FLAT WASHER, 1.70D| 11| 0.06 LBS|
11| GWL-05| 5/8′ GAIN LOCK WASHER| 4| 0.03 LBS|
12| GN-05| 5/8′ GALV HEX NUT| 4| 0.08 LBS|
13| PL375-4511| PLATE. TIE BACK MOUNTING| 1| 5.07 LBS|
14| V-CLAMP| CLAMP. 4 SLOT V| 1| 4.90 LBS|
15| GB-05605FT| 5/8′ X 6′ GALV BOLT KIT FULL THREAD| 4| 0.59 LBS| INCLUDES
BOLT, LOCK WASHER AND NUT
16| GWFO5A| GAIN FLAT WASHER HARDENED 5/8′. 1.300| 4| 0.04 LBS|
ROUND TOWER LEG ATTACHMENT DETAIL
ANGLE TOWER LEG ATTACHMENT DETAIL
ADAPTER FOR PIPE CONNECTION
COMMSCOPE, INC. OF NORTH CAROLINA
TITLETIE BACK ASSEMBLY FOR LARGER LEG
SIZE
A2| SCALE
1:7| DOCUMENT NO
MUK-SFK1L
| DRAWING|
VERSION| STATUS: REVISION
00| RE:A
C 2023 CommScope, Inc. Confidential
Documents / Resources
|
COMMSCOPE MUK-SFK1L Large Leg Tie Back / Stiff Arm
Kit
[pdf] Owner's Manual
MUK-SFK1L Large Leg Tie Back Stiff Arm Kit, MUK-SFK1L, Large Leg Tie Back
Stiff Arm Kit, Leg Tie Back Stiff Arm Kit, Tie Back Stiff Arm Kit, Stiff Arm
Kit, Arm Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>