FORTYFOUR Lateur Wireless Microphone User Manual

FORTYFOUR Lateur Wireless Microphone User Manual

INTRODUCTION

The Lateur wireless microphone provides professional level audio output without having to plug and play into an APP. It is the perfect accessory for: live webcasting, voice recording, video teaching and much more. Included in this package are the microphone charging case, clip on microphone transmitter, receiver with lightning connector, and lightning to USB-C adapter.

• Charging case
  

• Clip on microphone

• Lightning receiver

• Lightning to USB-C adapter

FEATURES

FREQUENCY 2.AG Hz wireless
Microphone Battery. 3.7V/70 m Ah
Ca SO Battery.. 3.7V/300 m Ah
Charging VO Ita Ge DCS5V (USB C)
[DETR RET SOS orc 2.3X2.5×1
WINK. _____ 0.11 Ibs

INCLUDED IN BOX

1. Charging box*1
2. Microphone transmitter*1
3. Lightning Receiver*1
4. Lightning to USB-C adapter*1
5. Type-C charging cable*1
6. User manual*1

HOW TO USE

Step 1: Connect the Lightning connector of the receiver to your mobile phone.

If needed, connect the lightning to USB-C adapter onto the connector and then plug in to your phone.

Step 2: Press the power button on the clip on microphone and the light will turn green. The microphone should now be powered on.

Step 3: The red light on the receiver will always be on. You can now use the microphone by opening APPs such as camera, live video, voice recorder, etc.

Product Overview

FUNCTIONS

1. Wind proof mesh
2. Microphone indicator light
3. Wireless microphone type-c charging port
4. Microphone clip
5. Power switch
6. Charging box type-c charging port
7. Wireless receiver lightning connector
8. Receiver indicator light
9. Receiver charging port

The microphone is equipped with a built-in battery, which can be used only after being charged. The power for the receiver is supplied by the phone it is plugged in to. (9 Type-c port is only used for phone charging )

MICROPHONE

FUNCTION: HOW TO USE

Power on| Press and hold the start button for 2seconds, the green light will turn on
---|---
Shut down| Press and hold the start button for 3seconds, the green light will turn offand the device is now powered off
Pairing search| Slow flashing green light
Clear apreviouspairing| Press the start button 4 consecutivetimes, and the green light will flashquickly
Successfulconnection| The green light will stay illuminated
Charging| The red light will stay illuminated
Fully charged| Red light will turn off
Low battery| Blue light will flash slowly
Automatic Power off| No connection for 3 minutes, will result in automatic shutdown

LIGHTNING RECEIVER

FUNCTION: HOW TO USE

red light flashes quickly

FCC ID: 2AWVU-LATEUR
Responsible Party: Foftyfour group LLC Company name: Foftyfour group LLC Address: 1770 S. 5350 W Ste 100 Salt Lake City, Utah 84104, United States
Tel: 801-727-1400
E-mail: origaudio.help@hpgbrands.com

ADDITIONAL INSTRUCTIONS

If your phone needs to be charged during use of the wireless clip on microphone, you can still-charge your phone directly by connecting a charging cable to the wireless adapter.

Note: This is only applicable to devices with a lightning charger.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. Thes device may not cause harmful interference, and
2. this device must accept any interference received including interference that may cause undesired operation. , FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>