COMMSCOPE MUK-PLK11 Structural Support Equipment User Guide
- June 15, 2024
- CommScope
Table of Contents
MUK-PLK11 Structural Support Equipment
REVISIONS
REV. | DESCRIPTION | DATE | APPROVED |
---|---|---|---|
A | INITIAL RELEASE | JL1183 | |
24AUG23 | YC1015 |
40177353CMO
GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST
BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE
THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
2.2 FIT ON MONOPOLE COLLAR MOUNT WITH 6″ X 6″ HOLE SPACING.
MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL
U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND
EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER
5.3 EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED COMPONENT PART NUMBERS
PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM NO.| PART NUMBER| DESCRIPTION| QTY.| WEIGHT|
NOTE NO.
---|---|---|---|---|---
1| TB-10X4-00| TUBE, 1011x e| 1| 24.38 LBS|
2| GB-0520A| 518- X 2′ GALV BOLT KIT (A325)| 4| 0.26 LBS| INCLUDES BOLT, LOCK
WASHER AND NUT
3| GWFO5A| GALV FLAT WASHER HARDENED 518′ 1 300| 4| 0.04 LBS|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>