HATOR HTM-400 Quasar Wireless Gaming Mouse User Manual
- June 9, 2024
- HATOR
Table of Contents
HTM-400 Quasar Wireless Gaming Mouse
User Manual
Gaming mouse
Hator Quasar Essential
Safe measures
Hator uses in production only quality components and parts that comply with
accepted quality standards and guarantees no defects in materials and
workmanship in the equipment for the time specified on the product packaging,
starting from the date of purchase in the retail network.
At the same time, please read this manual carefully before using the device,
and follow these rules.
The device intended for use with household or office digital equipment is a
commercial product and can be operated in the temperature range +5…+40°C and
relative humidity up to 70%.
The device is designed for individual use indoors. Not intended for use with
industrial equipment, as well as in production facilities. Any changes to the
device or non-standard use of the device that are not agreed with the
manufacturer or the manufacturer’s representative, remove from the
manufacturer and seller any liability for the free warranty service and the
consequences of such actions.
You can not open or modify the product. The device is not intended for use by
persons with reduced physical, sensory or mental capabilities, unless
controlled by other persons responsible for their safety. Be careful! Keep up
to following safety regulations:
- The device has small parts: infant’s and pets access should be limited to them;
- Use only the accessories specified by the manufacturer;
- Clean only with dry cloth or special cloths;
- Do not expose to temperatures above 60°C;
- Do not expose the device to direct sunlight for a long time, prevent liquid from entering.
Sometimes incorrect installation and use of the device can be mistaken for its malfunction. If the device does not work correctly, contact the support at www.hator.gg or the nearest service center listed on the warranty card provided by the seller.
Specification
Appearance
Dimensions and specifications
Model| Quasar Essential
Product code| HTM-400 HTM-401 HTM-402
HTM-403 HTM-404
Length| 122 mm
Width| 68 mm
Height| 38 mm
Weight| 70 g
Materials| Plastic
Sensor type| Optical
Sensor model| Pixart 3327
Sensor Resolution| 800-1200-1600-2400-6200 CPI
Acceleration| 30G
Polling rate| From 500 to 1000 Hz
Operating Voltage| 5 V
Operating Current| 150 MA
Connector| USB 2.0, USB 3.0
L-R Button switch| Huano 20 min
Encoder| F-Switch
Cable| 1,8 M. with a ferrite filter
System Compatibility| Windows XP/2000/MENista/7/10/11,
Android. Linux and Mac OS
Ethisment
- Mouse
- Replacement glide’s set
- Manual
Operation of the device
Connect to PC:
- Connect the mouse through the USB port, the operating system recognizes the mouse automatically.
- If necessary, download the software from the site www.hator.gg/download.
- If the PC does not recognize the device, try connecting to a different port.
DPI and Polin. Rate Switch
The indicator light red when mouse turn to default settings. To swiths DPI
press button (6) shortly. For turn to Poling Rate settings press button (6)
long.
Setting the DPI:
800 – the indicator lights up red (set by default)
1200 – the indicator lights up orange
1600 – the indicator lights up yellow
2400 – the indicator lights up green
Setting the Polling Rate:
125 Hz – the indicator lights up blue (set by defau It)
250 Hz – the indicator lights up light blue
500 Hz – the indicator lights up purple
1000 Hz – the indicator lights up white
Conditions of transportation and storage
The device is recommended to be stored in warehouses or in conditions similar to the storage requirements for IT equipment / electronics. The device is recommended to store at a temperature of +5°C to +40°C and humidity up to 70%. The place of storage (transportation) should be inaccessible to moisture, direct sunlight and should exclude the possibility of mechanical damage. In accordance with the terms and conditions of storage, the shelf life of the device in the manufacturer’s original packaging is 10 years. If necessary, transport any kind of civil transport in the available individual consumer packaging.
General restrictions and safet
Use of the product after the end of its service life The estimated service
life of this Hator device is 5 years, but depends in part on the life of the
installed switches. This product uses mechanical switches manufactured by
Huano, with a lifetime of 20 million pressures, the lifetime is calculated by
the manufacturer based on laboratory data and the specifications of the
components used, and is valid only if the user observes the rules of
operation, storage and transportation of the product. In case of violation of
the operating rules, the actual service life of the device can be reduced. At
the end of the life of the product, it is advisable to contact an authorized
service center for preventive maintenance of the product and determine its
suitability for further operation. Works on the preventive maintenance of the
product and its diagnostics are performed by authorized service centers on a
paid basis.
Utilization and protection of the environment
The rules for disposal of this product differ from the rules for disposing of
household waste. Unlike household waste, the product should be handed over to
the appropriate point of reception of electrical and electronic equipment for
processing. This contributes to the conservation of natural resources. By
observing the rules for the disposal of the product, you prevent possible
negative consequences for the environment and human health caused by improper
processing. Transfer the device to a specialized waste collection and disposal
center or contact the seller from whom the device was purchased. Competent
people will send this device to environmentally safe recycling. For improper
disposal of waste, fines are provided in accordance with the legislation in
force in the country where the device is sold.
Guarantee of the manufacturer (seller)
If the user complies with the operating rules, and taking into account the
stipulations stated in this manual, the device provides safety during use but
does not cause harmful effects to the environment and the person and is
serviceable. The device has a warranty period of operation – 24 months from
the date of purchase and without taking into account the time spent in repair
(subject to the rules of operation). The right to a guarantee is given when
completing the information of the warranty card, which is attached. For more
detailed product information, as well as questions and suggestions, please
contact the address below. Hator shall bear such liability (at the discretion
of Hator’s representatives), which limits your exclusive right to compensation
in the event of any breach of warranty obligations through the fault of the
buyer, repair or replacement of the product; the refund of the money paid
provided that the equipment is returned together with a copy of the goods or a
cash voucher to the seller or to the specified address, in accordance with the
requirements of the law. The guarantee is in addition to the rights granted
under local consumer rights laws. Its conditions vary from country to country.
Read the full warranty information to learn about your consumer rights and the
additional protection that is provided under this product warranty.
Supplier / Importer in Ukraine:
TOV »NVF «ELETEK LTD”»
Address: 33a., Dehtyarivska st., Kyiv,
Ukraine, 03057
tel: +38 (044) 538-15-16
Warranty period: 24 months
©2022 Hator. All rights reserved.
All registered trademarks are property of their respective owners.
www.hator.gg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>