HATOR GAMING Skyfall TKL PRO Mechanical Gaming Keyboard User Manual
- June 9, 2024
- HATOR GAMING
Table of Contents
Skyfall TKL PRO Mechanical
Mechanical gaming keyboard without digital block
Hator Skyfall TKL PRO
Security measures
HATOR uses in production only quality components and parts that comply with
accepted quality standards and guarantees no defects in materials and
workmanship in the equipment for the time specified on the product packaging,
starting from the date of purchase in the retail network.
At the same time, please read this manual carefully before using the device,
and follow these rules.
The device intended for use with household or office digital equipment is a
commercial product and can be operated in the temperature range +5…+40°C and
relative humidity up to 70%.
The device is designed for individual use indoors. Not intended for use with
industrial equipment, as well as in production facilities.
Any changes to the device or non-standard use of the device that are not
agreed with the manufacturer or the manufacturer’s representative, remove from
the manufacturer and seller any liability for the free warranty service and
the consequences of such actions. You can not open or modify the product.
The device is not intended for use by persons with reduced physical, sensory
or mental capabilities, unless controlled by other persons responsible for
their safety.
Be careful! Keep up to following safety regulations:
- The device has small parts: infant’s and pets access should be limited to them;
- Use only the accessories specified by the manufacturer;
- Clean only with dry cloth or special cloths;
- Do not expose to temperatures above 60°C;
- Do not expose the device to direct sunlight for a long time, prevent liquid from entering.
Sometimes incorrect installation and use of the device can be mistaken for its
malfunction.
If the device does not work correctly, contact the support at
www.hator.gg or the nearest service center listed on
the warranty card provided by the seller.
Specification
Appearance
Dimensions and specifications
Model| Skyfall TKL PRO
Product code| HTK-655, HTK-656, HTK-657, HTK-658, HTK-659
Dimentions| 365x142x28mm
Weight| 1140g
Materials| Plastic / Metal / Rubber
Type of connection| Wired USB
Polling rate| 1000Hz
Operating Voltage| 5V
Operating Current| 150мА
Switches type| Kailh BOX Red linear
Rating| dust – IP5Х
Operating Life| 80 million clicks
Operating Force| 45g ±10%
Pre Travel| 1.8 ±0.4mm
Total Travel| 3.6 ±0.3mm
LED Type| RGB
Cable| 1.8m
System Compatibility| Windows 7/10/11, Android, Linux and Mac OS
In the box
- Keyboard
- Cable
- Keycaps and switches puller
- User manual
Operation of the device
Use the shortcut keys and function keys for high-speed navigation, media file management and selection of keyboard functions using the Fn key.
Hotkeys for Windows
FN Combination key| Function| Comments
FN| All the combination keys will be light on white color if press the single
key “FN”|
FN + F1| Media player|
FN + F2| Volume down|
FN + F3| Volume up|
FN + F4| Mute|
FN + `~| Switch between all keys anti-ghosting and 6 keys anti-ghosting|
FN + F12| All keys lock|
FN + ESC| Restore to factory defaults| Long press in 5 second
Backlight`s Settings
| Key Combination | Function | Comments |
|---|---|---|
| FN + DEL | Full Light Mode (4 options) | |
| FN + HOME | Breathing backlight Mode | |
| FN + INSERT | Interactive light mode (5 options) | |
| FN + END | DIY Recording light mode | |
| FN + PGUP | Single backlight mode with 2 options (7 colors change incycle mode | |
| and static single light mode) | ||
| FN + PGDW | Change the backlight direction | |
| --- | --- | --- |
| FN + Prt Sc | Change to RGB light mode from single light mode | |
| FN + Scroll Lock | Add background light color when you are in Interactive | |
| light mode | Means you can only see the background light color after you enter |
into FN + INSERT
FN + Pause| Change to single light mode from RGB light mode|
FN + “← →”| Adjust backlight changing speed,left arrow key adjusts low speed
while right arrow key sdjust fast speed.|
FN + “↑ ↓”| Adjust backlight brightness,Up arrow key adjusts brighter
backlight while down arrow key adjusts the dim backlight|
FN + Win| Windows Lock to avoid accidental touch to quit the game, delaying
fighter|
To record the light setting in backlight mode
Step 1: Enter into backlight customize mode by pressing FN + END and then
press FN + Backspace key, and the indicator will be twinkling;
Step 2: Choose any of the key which you want it to be light on or light off;
Step 3: Press FN + Backspace key for storage and FN + ESC for removing the
setting if you need.
Macro recording
Step 1: Switch on customize mode by pressing FN + Y and Y,U,I,O,P five keys
will be light on;
Step 2: Enter to custom recording mode by pressing FN + F11 and the indicator
will be twinkling, and then you can choose one of key from the five keys
(Y,U,I,O,P) to be your marco key for gaming by pressing FN + Y/U/I/O/P;
Step 3: Set up any keys under the key you have chosen (for example, you set
«P» with 123 keys);
Step 4: Press FN + F11 for storage, then you will find that the «P» key will
be shown «123» after press, but if you turn off «Y» key by pressing FN + Y,
the macro key will be turn off. So, you have to turn on «Y» key by pressing
FN+Y if you want to find your Macro setting keys.
Conditions of transportation and storage
The device is recommended to be stored in warehouses or in conditions similar to the storage requirements for IT equipment / electronics. The device is recommended to store at a temperature of +5°C to +40°C and humidity up to 70%. The place of storage (transportation) should be inaccessible to moisture, direct sunlight and should exclude the possibility of mechanical damage. In accordance with the terms and conditions of storage, the shelf life of the device in the manufacturer’s original packaging is 10 years. If necessary, transport any kind of civil transport in the available individual consumer packaging.
General restrictions and safety
Use of the product after the end of its service life.
The estimated service life of this HATOR device is 5 years, but depends in
part on the life of the installed switches. This product uses mechanical
switches manufactured by Kailh Box Red, with a lifetime of 80 million
pressures, the lifetime is calculated by the manufacturer based on laboratory
data and the specifications of the components used, and is valid only if the
user observes the rules of operation, storage and transportation of the
product. In case of violation of the operating rules, the actual service life
of the device can be reduced.
At the end of the life of the product, it is advisable to contact an
authorized service center for preventive maintenance of the product and
determine its suitability for further operation. Works on the preventive
maintenance of the product and its diagnostics are performed by authorized
service centers on a paid basis.
Utilization and protection of the environment
The rules for disposal of this product differ from the rules for disposing of
household waste. Unlike household waste, the product should be handed over to
the appropriate point of reception of electrical and electronic equipment for
processing. This contributes to the conservation of natural resources. By
observing the rules for the disposal of the product, you prevent possible
negative consequences for the environment and human health caused by improper
processing. Transfer the device to a specialized waste collection and disposal
center or contact the seller from whom the device was purchased.
Competent people will send this device to environmentally safe recycling. For
improper disposal of waste, fines are provided in accordance with the
legislation in force in the country where the device is sold.
Warranty
If the user observes the rules of operation, and taking into account the
warnings set out in this user manual, the device ensures safety during use,
does not cause harmful effects to the environment and people, and is suitable
for operation. The device has a warranty period of operation – 24 months from
the moment of purchase and without taking into account the time spent in
repair (subject to compliance with the rules of operation). The right to a
warranty is granted upon filling out the information on the warranty card
provided at the time of sale. For more detailed information about the
products, as well as with questions and offers, contact the address indicated
below.
Instructions for use:
– Product cannot be opened or modified
– Do not disassemble the device or attempt to service it
– If the product is in an environment whose temperature exceeds the
permissible range, turn off the device and wait until the operating
temperature stabilizes within the specified range.
– Do not allow liquid to fall on the product
– Use the product only with certified signal sources
Violation of the operating rules may lead to the loss of the ability to
operate the equipment and the loss of the warranty.
If the product doesn`t work properly, contact HATOR support.
The warranty is in addition to the rights granted under local consumer laws.
Its conditions may differ depending on the country.
Some forms of exercising consumer rights when ensuring product warranty
obligations can be performed through retail outlets (including online stores),
which, in turn, are fully responsible for compliance with consumer rights
protection laws.
Supplier / Importer in EU:
HATOR Gaming B.V., Address: Prins Hendrikkade 21-E, 1012TL,
Amsterdam, The Netherlands, sales@hator.gg
Warranty period: 24 months
©2022 HATOR. All rights reserved. All registered
trademarks are property of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>