HATOR HTM-420 Quasar Wireless Mouse User Manual

HATOR HTM-420 Quasar Wireless Mouse User Manual

Sefety Instructions

Hator uses in production only quality components and parts that comply with accepted quality standards and guarantees no defects in materials and workmanship in the equipment for the time specified on the product packaging, starting from the date of purchase in the retail network.

At the same time, please read this manual carefully before using the device, and follow these rules.

The device intended for use with household or office digital equipment is a commercial product and can be operated in the temperature range +5…+40°C and relative humidity up to 70%.

The device is designed for individual use indoors. Not intended for use with industrial equipment, as well as in production facilities. Any changes to the device or non-standard use of the device that are not agreed with the manufacturer or the manufacturer’s representative, remove from the manufacturer and seller any liability for the free warranty service and the consequences of such actions.

You can not open or modify the product. The device is not intended for use by persons with reduced physical, sensory or mental capabilities, unless controlled by other persons responsible for their safety.

Be careful! Keep up to following safety regulations:

• The device has small parts: infant’s and pets access should be limited to them;
• Use only the accessories specified by the manufacturer;
•  Clean only with dry cloth or special cloths;
• Do not expose to temperatures above 60°C;
• Do not expose the device to direct sunlight for a long time, prevent liquid from entering.

Sometimes incorrect installation and use of the device can be mistaken for its malfunction. If the device does not work correctly, contact the support at www.hator.gg or the nearest service center listed on the warranty card provided by the seller.

Specifiacations

Appearance

Dimensions and specifications

Model| Quasar Wireless
Product code| HTM-420
Length| 122 mm
Width| 68 mm
Height| 38 mm
Weight| 88 g
Materials| Plastic
Sensor type| Optical
Sensor model| Pixart 3370
Sensor Resolution| 800-1200-1600-2400-19000 CPI
Acceleration| 500
Polling rate| From 500 to 1000 Hz
Operating Voltage| 5 V
Operating Current| 150 MA
Type of connection| Bluetooth + 2.4 GHz + USB
Battery Capacity| 1000 mA, Li-Ion
Usage time| 75 hours at Bluetooth and 2.4 GHz mode
Operation Distance| up to 10m
Standby| 8 months
L-R Button switch| Kailh 80 min
Encoder| F-Switch
Cable| 1,8 M. with a ferrite filter
System Compatibility| Windows XP/2000/MENista/7/10/11, Android,
Linux and Mac OS
2.4 GHz dongle is included

Equipment

• Mouse
• 2.4 GHz dongle
• Manual
• Replacement glide’s set

Operation of the device

Connect to PC:

1. Connect the mouse through the USB port, the operating system recognizes the mouse automatically.
2. If necessary, download the software from the site www.hator.gg/download.
3. If the PC does not recognize the device, try connecting to a different port.

Switch between wired and wireless mode

Switch to work on operating systems:
Windows, Android/IOS, MAC

Switch for tree connection types:
Bluetooth / Wired / 2.4 GHz

1. The device automatically switches to wired mode as soon as the cable is connected.
2. Disconnecting the cable automatically switches the device to wireless mode (2.4 GHz by default) Press and hold the (3)+(4)+(1) buttons for two seconds to switch between Bluetooth and 2.4 GHz modes.
   

You can turn off the mouse by the switch (7) when you don’t need it (only for wireless mode).

DPI and Poling Rate Switch

The indicator light red when mouse turn to default settings. To swiths DPI press button (6) shortly. For turn to Poling Rate settings press button (6) long.

Setting the DPI
Select the required DPI by pressing the button: 800 — the indicator lights up red (set by default)

• 1200 – the indicator lights up orange
• 1600 — the indicator lights up yellow
• 2400 — the indicator lights up green

Setting the Polling Rate
Select the required by pressing the button:

• 125 Hz — the indicator lights up blue (set by default)
• 250 Hz — the indicator lights up light blue
• 500 Hz — the indicator lights up purple
• 1000 Hz — the indicator lights up white

Switch Between paired devices

• Press and hold the key combination (2) + (4) for one second to connect to device #1 via Bluetooth.
• Press and hold the key combination (2) + (5) for one second to connect to device #2 via Bluetooth.
• Press and hold the key combination (2) + (4) + (5) for one second to connect to device #3 via Bluetooth.

For all next connect your mouse to the device via Bluetooth using the keys (1)

• (3) + (2). Press and hold the keys for three seconds. The indicator will flash for info in different colors.

Indicators

Charging mode indicator:

• Charging: red light
• Fully charged: turn off
• Low power: red light flash

Connect the cable to the mouse to charge the battery.
The mouse wil! go to sleeg mode after 30 minutes of not using it. To activate the mouse, move it or press any button.

Mode indicators
2.4 GHz mode: green light when switch and turn of or light up red
(when battery charge is low)

• Bluetooth mode, device #1: dark blue
• Bluetooth mode, device #2: light blue
• Bluetooth mode, device #3: blue

Connecticon: 2.4GHz /Wired/Bluetooth

The default for wireless mode is 2.4G, so you can see the green indicator light after pulling the button on the wireless mode.

But if you need back to 2.4G mode from Bluetooth mode, you have to hold the mouse button Left Button (1) + Scroll (3) + Right Button (2) in 3 seconds

2.4 GHz Switch to 2.4GHz mode and hold Left Mouse Button (1), Scroll (3) and Right Mouse Button (2) for three seconds.

The indicator will flash green, and the receiver will start pairing. Then connect the dongle at a distance oP10 mm from the mouse. The indicator will light up for one second and then turn off if the gaming is successful. The indicator will turn off after 60 seconds if the connection is failed, and the mouse will turn into sleep mode.

Bluetooth

1st Step: Hold the mouse Left Button Scroll (3) + Right Button (2) in 3 seconds need change fo Bluetooth mode from 2.4G) 1) + you
2nd Step: choose Bluetooth channel by the following key combination:

1. Bluetooth device #1: hold the R’ight + Forward f4) key for 1 second (indicator will be in dark blue)
2. Bluetooth device #2: hold the Right(2) + Back (5) key 1 second (indicator will be in light blue)
3. Bluetooth device #3: hold the Ripht (2) Forwa be in + Back (5) key 1 second (indicator will

Reconnect
Remember the connected Bluetooth devices before turnina off. When indicator will flash sIOwI the was filed, the indicator will turn off after 60 seconds and the mouse will turn into sleep mode.

Wired
Connect the cable and turn the switch on the back of the mouse to wired mode.

Conditions of transportation and storage

The device is recommended to be stored in warehouses or in conditions similar to the storage requirements for IT equipment / electronics. The device is recommended to store at a temperature of +5°C to +40°C and humidity up to 70%. The place of storage (transportation) should be inaccessible to moisture, direct sunlight and should exclude the possibility of mechanical damage. In accordance with the terms and conditions of storage, the shelf life of the device in the manufacturer’s original packaging is 10 years. If necessary, transport any kind of civil transport in the available individual consumer packaging.

General restrictions and Safety

Use of the product after the end of its service life

The estimated service life of this Hator device is 5 years, but depends in part on the life of the installed switches. This product uses mechanical switches manufactured by Kailh, with a lifetime of 80 million pressures, the lifetime is calculated by the manufacturer based on laboratory data and the specifications of the components used, and is valid only if the user observes the rules of operation, storage and transportation of the product. In case of violation of the operating rules, the actual service life of the device can be reduced. At the end of the life of the product, it is advisable to contact an authorized service center for preventive maintenance of the product and determine its suitability for further operation. Works on the preventive maintenance of the product and its diagnostics are performed by authorized service centers on a paid basis.

Utilization and protection of the environment

The rules for disposal of this product differ from the rules for disposing of household waste. Unlike household waste, the product should be handed over to the appropriate point of reception of electrical and electronic equipment for processing. This contributes to the conservation of natural resources. By observing the rules for the disposal of the product, you prevent possible negative consequences for the environment and human health caused by improper processing. Transfer the device to a specialized waste collection and disposal center or contact the seller from whom the device was purchased. Competent people will send this device to environmentally safe recycling. For improper disposal of waste, fines are provided in accordance with the legislation in force in the country where the device is sold.

Guarantee of the manufacturer (seller)
If the user complies with the operating rules, and taking into account the stipulations stated in this manual, the device provides safety during use but does not cause harmful effects to the environment and the person and is serviceable. The device has a warranty period of operation – 24 months from the date of purchase and without taking into account the time spent in repair (subject to the rules of operation). The right to a guarantee is given when completing the information of the warranty card, which is attached. For more detailed product information, as well as questions and suggestions, please contact the address below. Hator shall bear such liability (at the discretion of Hator’s representatives), which limits  your exclusive right to compensation in the event of any breach of warranty obligations through the fault of the buyer, repair or replacement of the product; the refund of the money paid provided that the equipment is returned together with a copy of the goods or a cash voucher to the seller or to the specified address, in accordance with the requirements of the law. The guarantee is in addition to the rights granted under local consumer rights laws. Its conditions vary from country to country. Read the full warranty information to learn about your consumer rights and the additional protection that is provided under this product warranty.

Support

Supplier / Importer in Ukraine:
TOV «NVF “ELETEK LTD)>
Address: 33a., Dehtyarivska st., Kyiv, Ukraine, 03057
tel: +38 (044) 538-15-16
Warranty period: 24 months ©2022 Hator.
All rights reserved.
All registered trademarks are property of their respective owners. www.hator.gg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>