DJFHKO MJ-W885-3 Vintage Bathroom Vanity Light Fixtures Installation Guide
- June 15, 2024
- DJFHKO
Table of Contents
**DJFHKO MJ-W885-3 Vintage Bathroom Vanity Light Fixtures Installation Guide
**
Installation instructions
MJ-W885-3
- Be careful! Before installing the lamp, please cut off the power or turn the switch to “OFF” state.
- Fix the hanging plate on the junction box with screws.
- Connect the power cord and ground wire with the terminal cap as required and put them in the junction box, make sure the wiring is secure and in good contact.
- Fix the ceiling plate on the hanging plate with screws.
- Remove the outer ring of the accessory “F” lamp holder fromthe lamp body.
- Install the G9 light source into the lamp head. Make sure that the light source is firmly installed and in good contact.
- Lock Glass on the lamp body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>