velleman PEM7DW Mini Wireless Infrared Security System User Manual

velleman PEM7DW Mini Wireless Infrared Security System

Product Information

The PEM7DW is a compact entry and approach warning system designed for use in shops, reception areas, private homes, and other similar environments. It consists of a transmitting and receiving unit that uses an invisible, modulated beam of IR light to provide protection. The device utilizes a LED to produce the beam, which offers a longer lifespan and is more resistant to surge and vibration damage compared to a tungsten filament lamp. The receiver is sensitive to the frequency of the modulated light in the beam. The system triggers an audible warning when the beam is interrupted by a person walking through it.

Important Environmental Information
Residents of the European Union should take note of the important environmental information regarding this product.

Product Usage Instructions

1. Safety Instructions: Keep the device away from children and unauthorized users. There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
2. General Guidelines: Keep the device away from rain, moisture, splashing, dripping liquids, dust, and extreme temperatures.
3. Overview: Refer to the illustrations on page 2 of the user manual for a visual representation of the product components.
4. Installation:
5. Ensure that the speaker is switched to the Chime or Alarm position (Off=Silent).
6. Check that the timer and volume potentiometers are not set to their minimum positions.
7. The RED LED should be ON when the beam is properly aligned. If the LED is OFF, realign the beam.
8. Mount the reflector at least 50cm away from the sensor to ensure proper beam alignment.
9. Insert the plug of the AC/DC adaptor into the DC9~15V socket of the speaker.
10. If you have purchased the optional 4 digits counter (PEM7D/C), connect it to the OUTPUT of the speaker using the included 10m cable.
11. Use the attached screwdriver provided in the inner box for installation. Do not use any other size.
12. Troubleshooting: Refer to the troubleshooting section in the user manual for assistance with any issues that may arise.
13. Specifications: Detailed specifications of the product can be found in the specifications section of the user manual.

PEM7DW

Box Contents

INSTRUCTIONS

Introduction

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.
The PEM7DW is a compact entry and approach warning system for use in shops, reception areas, private homes, etc. The device consists of a transmitting and receiving unit that transmits an invisible, modulated beam of IR light across e.g. a doorway, onto a prismatic reflector mounted across from the transmitter. This reflects the beam back to the receiver to complete the protection circuit. The beam is interrupted when a person walks through it, causing the alarm to trigger and sound an audible warning. The beam is produced by a LED, which has a much greater lifespan and is less susceptible to surge and vibration damage than a tungsten filament lamp. The receiver is only sensitive to the frequency of the modulated light in the beam.

Notes
It is recommended to use this device indoors. Rain drops and condensation may influence its operation.

Safety Instructions

authorized dealer for service and/or spare parts.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.

Overview

Refer to the illustrations on page 2 of this manual.

Connection diagram

adjustment
3| Reflector| 8| User manual
4| Power adapter| 9| Carton box
5| Mounting Bracket & screws for Sensor|  |

• Not incl.

 Installation

1. Please check that the speaker is switched to the “Chime” or “Alarm” position. (Off=Silent).
2. Please check that the timer and volume potentiometers are NOT in their min. Position.
3. The RED LED will be ON when the beam is properly aligned, if the LED is OFF please realign the beam
4. The reflector should be mounted a minimum of 50cm from the sensor otherwise it will be impossible to align the beam properly.
5. Make sure the plug of AC/DC adaptor is inserted into the DC9~15V socket of the speaker
6. If you have purchased the 4 digits counter (optional PEM7D/C), it should be connected to the “OUTPUT” of the speaker via the included 10 m cable.
7. Please use the attached screwdriver in the inner box, Don’t use any other size.

Troubleshooting

When problems are encountered, refer to following overview before contacting your local dealer:

• Check that the speaker is set to “CHIME” or “ALARM”. “OFF” = silent.
• Check that the timer and/or volume are not in the “min.” position.
• A red LED indicates that the sensor and reflector are properly aligned. If the LED is off, realign the sensor and reflector. The distance should be at least 50 cm.
• Make sure the adapter and sensor are firmly connected to the speaker.

Specifications

Physical properties

• Presence detection
• Light source IR led

Electrical data

• Current consumption < 130 mA
• Transmission distance indoor <= 20 m
• Transmission distance open space <= 100 m
• Maximum RF power transmitted 8 dBm
• Transmission frequency 433.92 MHz

Set-up options

• Maximum detection range 7 m
• Adjustable timer

Environmental data

• IP rating IP44
• Operating temperature -20-50 °C
• Usage location Indoor & outdoor

Operational properties

• Volume control
• Instruction manual languages Dutch, English, French, German, Spanish
• Automatic alarm warning
• Duration of audio signal for alarm 30 s
• Duration of audio signal for chime ± 1 s
• Entry detection
• Speaker output type Off, Alarm, Chime
• Adjustable timer before alarm activation 3-30 s

Power supply

• Adapter output voltage rating VDC 12 V DC
• Adapter input voltage rating VAC 230 V AC
• Input voltage rating VDC 9-15 V
• Adapter output current rating 500 mA

Included
Set contents

• 1 x Photoelectric IR sensor transmitter with reflector
• 2 x Power supply 230 V / 12 VDC / 500 mA
• 1 x receiver alarm speaker (timer & volume adjustable)

Product basic info

• Colour Black
• Additional material Glass, Metal
• Material ABS

RED Declaration of Conformity

• Hereby, Velleman Group nv declares that the radio equipment type PEM7DW is in compliance with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the following internet address: www.velleman.eu
• Use this device with original accessories only. Velleman group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device.
• For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu.
• The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
• You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

Not covered by warranty:

• all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
• consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
• flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
• flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
• damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
• damage resulting from an inappropriate packing and shipping of the article;
• all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint : In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
• Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial warranties.
• The above enumeration is subject to modification according to the article (see article’s manual).

Made in Taiwan
Imported by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belgium www.velleman.eu

References

• Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>