CISCO RV340 Any Connect Secure Mobility Client User Guide

CISCO RV340 Any Connect Secure Mobility Client

Product Information

Specifications

• Product: Cisco AnyConnect Secure Mobility Client
• Software Version: 4.10.x (Download latest)
• Applicable Devices:
  • RV340 | 1.0.03.21 (Download latest)
  • RV340W | 1.0.03.21 (Download latest)
  • RV345 | 1.0.03.21 (Download latest)
  • RV345P | 1.0.03.21 (Download latest)
• Supported Operating Systems:
  • Windows versions 8.1 and Microsoft-supported versions of Windows 10 for ARM64-based PCs, current Microsoft-supported versions of Windows 10 x86(32-bit) and x64(64-bit).

Introduction

The Cisco AnyConnect Secure Mobility Client is a modular endpoint software product that provides Virtual Private Network (VPN) access through Secure Sockets Layer (SSL), Internet Protocol Security (IPsec), and Internet Key Exchange version2 (IKEv2). It also offers enhanced security through various built-in modules.

Install AnyConnect Secure Mobility Client

Prerequisites

Before installing the AnyConnect Secure Mobility Client, make sure you have the following:

• A licensed product – You need to purchase client license(s) from a partner like CDW or through your company’s device procurement. Various license options are available, including options for 1 user or packets of licenses for multiple users. For more details on licensing, check out the links in the Licensing Information section below.
• The latest firmware version available for your router – Download and install the latest firmware available for your router. Refer to the provided step-by-step instructions for this process.
• A compatible Windows operating system – The AnyConnect Secure Mobility Client is compatible with Windows versions 8.1 and Microsoft-supported versions of Windows 10 for ARM64-based PCs, current Microsoft-supported versions of Windows 10 x86(32-bit) and x64(64-bit). If you are using a different operating system, refer to the relevant articles for installation instructions.

Installation Steps

Step 1: Open Cisco Software Downloads webpage

Open a web browser and navigate to the Cisco Software Downloads webpage.

Step 2: Search and select AnyConnect Secure Mobility Client

In the search bar, start typing ‘Anyconnect’ and the options will appear. Select AnyConnect Secure Mobility Client v4.x.

Step 3: Download the Cisco AnyConnect VPN Client

Download the Cisco AnyConnect VPN Client. Most users will select the AnyConnect Pre-Deployment Package (Windows) option.

Note: The images in the documentation may be based on a different version, but the steps remain the same.

Step 4: Troubleshooting

If you have purchased a license and are unable to download AnyConnect, contact Cisco Global Service Relations at +1 919-993-2724. Select option 2 and provide your Cisco ID (the one used to log into Cisco.com) and the sales order number. They will assist you with the download.

Licensing Information

AnyConnect client licenses allow the use of the AnyConnect desktop clients as well as any of the AnyConnect mobile clients that are available. A client license is required to download and use the Cisco AnyConnect Secure Mobility Client. Client licenses are sold in packs of 25 from partners like CDW or through your company’s device procurement.

For more information about AnyConnect licensing, refer to the following resources:

• Cisco RV340 Series and Cisco Anyconnect Secure Mobility Client Community Discussion Forum
• AnyConnect Licensing FAQs

FAQ

Q: Which routers is the Cisco AnyConnect Secure Mobility Client applicable to?

A: The Cisco AnyConnect Secure Mobility Client is applicable only to the Cisco Small Business RV34x series routers and not Enterprise products.

Q: Can I install AnyConnect Secure Mobility Client on a Mac or Ubuntu Desktop?

A: Yes, installation instructions for Mac and Ubuntu Desktop can be found in the relevant articles.

RV34x: Install Cisco AnyConnect Secure Mobility Client on a Windows Computer

Objective

This article shows you how to download and install the Cisco AnyConnect Secure Mobility Client on a Windows Computer.

This article is ONLY applicable to the Cisco Small Business RV34x series routers, not Enterprise products.

Introduction

AnyConnect Secure Mobility Client is a modular endpoint software product. It not only provides Virtual Private Network (VPN) access through Secure Sockets Layer (SSL) and Internet Protocol Security (IPsec) Internet Key Exchange version2 (IKEv2) but also offers enhanced security through various built-in modules.

AnyConnect Software Version

AnyConnect | 4.10.x (Download latest)

Install AnyConnect Secure Mobility Client

This toggled section provides details and tips for beginners.

Prerequisites

• AnyConnect is a licensed product. You need to purchase client license(s) from a partner like CDW or through your company’s device procurement. There are options for 1 user (L-AC-PLS-3Y-S5) or packets of licenses including one year for 25 users (AC-PLS-P-25-S). Other license options available as well, including perpetual licenses. For more details on licensing, check out the links in the Licensing Information section below.
• Download the latest version of firmware available for your router. (Click here for step-by-step instructions on this process.)
• Windows versions 8.1, Microsoft-supported versions of Windows 10 for ARM64-based PCs, current Microsoft supported versions of Windows 10 x86(32-bit) and x64(64-bit).
• Don’t use Windows? Check these other articles out!
• Install AnyConnect on a Mac
• Install AnyConnect on an Ubuntu Desktop

Applicable Devices | Software Version

• RV340 | 1.0.03.21 (Download latest)
• RV340W | 1.0.03.21 (Download latest)
• RV345 | 1.0.03.21 (Download latest)
• RV345P | 1.0.03.21 (Download latest)

Licensing Information

AnyConnect client licenses allow the use of the AnyConnect desktop clients as well as any of the AnyConnect mobile clients that are available. You will need a client license to download and use the Cisco AnyConnect Secure Mobility Client. A client license enables the VPN functionality and are sold in packs of 25 from partners like CDW or through your company’s device procurement.

Want to know more about AnyConnect licensing? Here are some resources:

• Cisco RV340 Series and Cisco Anyconnect Secure Mobility Client Community Discussion Forum.
• AnyConnect Licensing FAQs.

Step 1

Open a web browser and navigate to the Cisco Software Downloads webpage.

Step 2
In the search bar, start typing ‘Anyconnect’ and the options will appear. Select AnyConnect Secure Mobility Client v4.x.

Step 3
Download the Cisco AnyConnect VPN Client. Most users will select the AnyConnect Pre-Deployment Package (Windows) option.

Step 4
Navigate Windows File Explorer to the installer file. Double-click Setup.exe to initiate the installation process.

Step 5
A pop-up window may ask for permissions, in this case, select Yes. If your pop-up asks if you are sure you want to run this software, select Run.

Step 6
Check the check boxes for the modules that you need to install.

• Core & VPN – Includes AnyConnect core client with VPN capability.
• Start Before Login – User sees the AnyConnect GUI logon dialog before the Windows logon dialog box appears.
• Network Access Manager – It is a client software that provides a secure Layer 2 network. VPN Posture (Hostscan) – Provides the client the ability to identify the operating system, anti-virus, anti-spyware, and firewall software installed on the host.
• AMP Enabler – It is used as a medium for deploying Advanced Malware Protection (AMP) for endpoints.
• Network Visibility Module – Collects rich flow context from an endpoint on or off premise and provides visibility into network connected devices.
• Cloud Web Security – It is an endpoint component that routes HTTP traffic to a Cisco Cloud Web Security scanning proxy.
• Umbrella Roaming Security – Provides DNS-layer security when no VPN is active.
• ISE Posture – It is similar to VPN Posture; performs a client-side evaluation.
• Select All – Selects all modules.
• Diagnostic and Reporting Tool – It is used to collect data for troubleshooting AnyConnect installation and connection problems.

Step 7
(Optional) Check the Lock Down Component Services check box if the feature needs to be enabled. Enabling this feature will prevent users from disabling the Windows Web Security service.

Step 8
Click Install Selected.

Step 9
Click OK.

Step 10
Carefully review the Supplemental End User License Agreement and then click Accept.

Conclusion and Next Steps after Installation

There you have it! You have now successfully installed the Cisco AnyConnect Secure Mobility Client on your computer.

• Wondering what the next steps are? Don’t worry. If you need help configuring AnyConnect on your router, check out Configure AnyConnect VPN Connectivity on the RV34x Series Router.
• We want the best for our customers, so you have any comments or suggestions regarding this topic, please send us an email to the Cisco Content Team.
• By the way, once the configurations are complete on the router, you can view your connection on the lower right-hand of your screen. Click the up arrow and hover over the AnyConnect icon to see the details.

AnyConnect App

The Anyconnect App can be downloaded from the Google Play store or the Apple store.

Download Android App Download iOS App

Additional Resources
Basic Troubleshooting Administrator Guide Release 4.10 Release Notes – 4.10 AnyConnect Licensing – RV340 Cisco Business VPN Overview and Best Practices

View a video related to this article…

Click here to view other Tech Talks from Cisco

References

• Ubuntu Manpage: This manual page is part of the POSIX Programmer's Manual. The Linux implementation of
• Ubuntu Manpage: tar — The GNU version of the tar archiving utility
• Ubuntu Manpage: sudo, sudoedit — execute a command as another user
• Small Business Support Community - Cisco Community
• Answer Cisco Secure Client Licensing Frequently Asked Questions - Cisco
• Cisco RV Routers VPN Overview and Best Practices - Cisco
• Installing and Using AnyConnect on Ubuntu Desktop using the User Interface - Cisco
• RV34x: Installing and Using AnyConnect on Ubuntu Desktop - Cisco
• Basic Troubleshooting on Cisco AnyConnect Secure Mobility Client Errors - Cisco
• Upgrade Firmware on an RV34x Series Router - Cisco
• AnyConnect Client Licensing - Cisco
• Configure AnyConnect Virtual Private Network (VPN) Connectivity on the RV34x Series Router - Cisco
• RV34x: Install Cisco AnyConnect Secure Mobility Client on a Mac Computer - Cisco
• RV34x: Install Cisco AnyConnect Secure Mobility Client on a Windows Computer - Cisco
• Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 4.10 - Cisco
• Release Notes for Cisco AnyConnect Secure Mobility Client, Release 4.10 - Cisco
• Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 4.9 - Cisco
• Release Notes for Cisco AnyConnect Secure Mobility Client, Release 4.9 - Cisco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>