TURING EVC5FD Cloud Dome Camera Installation Guide
- June 15, 2024
- TURING
Table of Contents
Quick Installation Guide
WHAT’S INCLUDED
TOOLS YOU’LL NEED
Connection| 24/7 broadband internet connection
Ethernet cable
Smart phone (iOS or Android) or computer
(Mac or Windows)
---|---
Power| PoE switch or PoE injector that is IEEE 802.3af compatible
Mounting| Tip size#2 Philips screwdriver or bit (PH2)
Power drill
1/8″ (3mm) drill bit for pilot holes
1/4″ (6mm) drill bit for anchors
Optional: 5/8″ (16mm) bit or hole cutter for the network cable
KNOW YOUR EDGE+
MOUNT EDGE+
Find Installation Spot
Mounting a camera requires a little bit of planning. It saves time to plan
ahead before drilling holes in your wall.
The EVC5FD, with IP66 and IK10 rating, is weatherproof and vandal resistant.
It can be installed indoor and outdoor, operating between -22°F and 140°F. 7
to 10 feet above the ground, tilted downward, is best — this is high enough to
let you see people’s faces and wide enough to cover most areas with its field
of view of 111°.
Avoid positioning the camera behind the glass and under the overhangs. They
may reflect IR light into the camera and cause issues in the camera night
vision.
DRILL MOUNTING HOLES
Attach and Secure the Cable
BEST MOUNTING PRACTICE
POWER IT UP
ADJUST THE ANGLE
Pan and tilt the camera and check its video in the Turing Vision app to fine-
tune the position.
Fasten the tilt screw to fix the tilt angle
ACTIVATE EDGE+
PREPARE YOUR TPP INFO
Write down your TPP number here before adding and activating the cameras.
You will need it in the next step. By entering your TPP number, you can view
your customer’s contact information, update the device firmware, and monitor
their device health remotely from the Partners Portal.
My TPP Number is
The TPP number is the unique identifier you receive when you join the Turing
Partner Program.
Not a Turing Partner yet?
Join our Turing Partner Program today.
sales@turingvideo.com
877.730.8222
turing.ai/tpp
CREATE ACCOUNT
- Log into the Partner Portal.
https://partner-portal.turingvideo.com
Get the Partner App by downloading it from the App Store or Google Play.
ADD SYSTEM
After setting up the customer account, proceed with the installation steps.
Once the installation is finished, make sure to click on “Installation
Complete” to send an invitation to the customer to activate their account.
Once the customer activates their account, request full admin access to
configure or add more systems, and troubleshoot any issues with their account.
INSTALL IN 3 CLICKS
Get Started
The QR code and MAC address can be found on the back of your device or the product package.
Auto Search
A To speed up the setup process, we recommend using the ” + Batch-Add” feature
to automatically detect other Edge+ cameras on your local network. On the web,
simply click the “+ Batch-Add” icon next to a camera to start the search. On
mobile, swipe left on any camera and tap the “+ Batch-Add” icon.
B However, if you prefer, you can manually scan the QR codes or enter the MAC
addresses instead.
Batch Add
A To add cameras to the customer’s account, edit their names and time zone,
and click “Add & Activate.”
B If a camera does not meet the minimum firmware requirement, our system will
automatically upgrade the camera firmware upon activation.
C Additionally, any unformatted SD cards will be initialized during this
process.
SAFETY
The product must be installed and protected in a location that is not easily
accessible, and is away from impacts or heavy vibration.
Do not install the product on an unstable mount or surface.
Do not disassemble the camera or perform maintenance task when power is
connected.
The product should be used in compliance with local laws and regulations.
Before installation, the product should be stored in a dry and ventilated
environment.
Use only accessories that comply with the technical specifications of the
product.
Power over Ethernet (PoE) shall be provided by listed Information Technology
Equipment meeting IEEE 802.3af PoE standards. If an external power supply is
used, to ensure compliance with electrical safety standards, CSA Certified/UL
Listed LPS or Class 2 power adaptors are required.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
LIMITED WARRANTY
Turing AI is pleased to offer up to ten (10) years of limited warranty for
Turing-branded cameras purchased from our authorized distributors and
authorized dealers, with a continuous Turing Video CORE AI license
subscriptions.
Without Turing Video CORE AI license subscriptions, all Turing-branded
cameras, recorders, and bridge devices purchased from our authorized
distributors and authorized dealers come standard with a three (3) year
limited warranty.
Enjoy the security and peace of mind with Turing products anytime, anywhere.
Some restrictions may apply. For complete details, please refer to the Turing
AI Limited Warranty Policy available in the link below
https://turing.ai/legal/warranty
CONTACT
Contact us at
support@turingvideo.com
866.816.7426
Visit
https://turing.ai
EDGE+ Installation Guide
https://turing.ai/edge-plus-qsg
References
- Turing Partner Program - A Valuable Partnership for Long-Term Revenue Streams
- Turing AI | Turing Partner Portal
- Turing AI - Limited Warranty Policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>