imperial V5.3 Bone Conduction Headphones User Manual

imperial V5.3 Bone Conduction Headphones

FOREWORD
Dear customer, thank you for choosing this product. Our product complies with legal requirements and has been manufactured under constant quality controls. The technical specifications are up to date at the time of printing. Subject to change. The warranty period for the device complies with the legal provisions at the time of purchase. We also offer our telephone HOTLINE service with professional assistance. In our service area, professional experts are available to ans-wer any questions you may have regarding the products and provide tips on locating possible causes of errors. Our technicians are available from Monday to Friday, from 8:00 am to 4:45 pm, at the following telephone number: Technical Hotline: +49 2676 / 95 20 101 or by email at: [email protected]
If the service hotline is unable to assist you, please send the device, preferably in its original packaging, but securely packaged for transport, to the following address:

TELESTAR – DIGITAL GmbH

• Service Center
• Am Weiher 14 (Industriegebiet)
• 56766 Ulmen

Please read these instructions carefully and keep them for future reference. If you sell or pass on the device, please be sure to include this user manual.

Product Information

Specifications

• Product Name: bluTC active 2
• Model: NL

Product Usage Instructions

Safety Instructions

Symbol Explanation

• Danger: This signal word refers to a high-risk danger that, if ignored, can lead to death or serious injury.
• Warning: This signal word refers to a medium-risk danger that, if ignored, can lead to death or serious injury.
• Caution: This signal word refers to a low-risk danger that, if ignored, can lead to minor or moderate injury.

Intended Use
The manufacturer assumes that the operator of the device has general knowledge of consumer electronics usage. This Bluetooth headphone is a consumer electronic device. The headphone is designed for wireless playback of audio signals and can also be used as a headset. The headphone is intended for private use only and is not intended for commercial use. Use the headphone only as described in this user manual. Any other use is considered improper and may result in property damage. The manufacturer or retailer assumes no liability for damages caused by improper or incorrect use.

Safety Instructions
Before using the device, check for any damage or defects. If damaged or defective, do not use the device. Only use replacement and accessory parts provided or approved by the manufacturer. Do not modify the device or use additional devices or parts that are not explicitly approved or provided by the manufacturer.

Intended Use
The manufacturer assumes that the operator of the device has general knowledge in handling consumer electronic devices.

Safety Instructions
Please inspect the device before use.
In case of damage or defect, do not operate the device. Use only replacement and accessory parts supplied or appro-ved by the manufacturer.
Do not modify the device or use any additional devices or replacement parts that have not been explicitly approved or supplied by the manufacturer.

DANGER
Risk of injury
Do not store the packaging materials (bags, polystyrene pieces, etc.) within the reach of children. Children should not play with the packaging. There is a particular risk of suffocation with packaging films.

DANGER
Impaired perception when using the headphones

Do not use the headphones:

• in road traffic,
• while operating a vehicle,
• while cycling,
• as a pedestrian in road traffic,
• while operating machinery.

There is a risk that external sounds or warning signals may not be perceived.

WARNING
Risk of hearing damage
Excessive sound pressure when using headphones can lead to damage or loss of hearing. Listening with earphones or headphones at high volume for an extended period can cause harm to the user. Please check the volume before inserting or wearing earphones or headphones.

Safety Instructions
Set the volume to a low level and only increase the volume to a level that is still comfortable for you.

CAUTION
The device contains a battery. Exposing the battery to an environment with extremely high temperatures can result in an explosion or the release of flammable liquids or gases. Do not throw the device into a fire or disassemble it. There is a risk of a battery short circuit, which can lead to a fire or explosion.
Avoid placing the device in close proximity to heat sources such as radiators, open flames like candles, devices with strong magnetic fields such as speakers. Also, make sure that the device is not exposed to dripping or splashing water.

NOTE
Please keep the device in a location that is inaccessible to children.

Safety Instructions
This device can be used by children aged 8 and older and by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and/or knowledge if they have been supervised or instructed on the safe use of the device and understand the resulting risks. Never leave children unattended when using the device. Inspect the device for any damage before each use. If you notice visible damage or if the device shows visible damage, do not use it. If you encounter any technical or mechanical issues, please contact TELESTAR Service. If you notice unusual noises or odors, immediately turn off the device and remove the charging cable.

DANGER
Notes on the wireless interface
The device generates an electromagnetic field. Please pay attention to notices in your surroundings that prohibit or restrict the operation of electronic devices. This may apply, for example, in hospitals, gas stations and fueling facilities, or airports. If there are any such warning signs, immediately turn off the device. The components within the device produce electromagnetic energy and magnetic fields, which can interfe-re with medical devices such as pacemakers or defibrillators. Therefore, please maintain a safe and sufficient distance between medical devices and the headphones. If you have reason to believe that the device is causing interference with a medical device, promptly turn off the device or disconnect it from the power source.

Packaging Safety
Danger: The packaging materials (bags, polystyrene pieces, etc.) should be kept out of the reach of children. Children should not play with the packaging. There is a particular risk of suffocation with packaging films.

Headphone Usage Safety
Danger: Impaired perception when using the headphones. Do not use the headphones in situations where environmental sounds or warning signals may go unnoticed.
Warning: Hearing damage. Excessive sound pressure when using headphones can lead to damage or hearing loss. Listening with earbuds or headphones at an increased volume for a prolonged period can cause harm to the user. Please check the volume before placing earbuds or headphones in your ears or wearing them.

Cleaning the Device
Refer to the cleaning instructions provided in section 2.4 of the user manual. Before cleaning, make sure to turn off the device. Use a dry, soft cloth to clean the device. Do not use any liquids to clean the device. Avoid using solvents or cleaning agents as they may damage the surface and/or labels of the device. Please remove all parts from the packaging and ensure that all packaging

SCOPE OF DELIVERY

materials are completely removed. If any of the specified parts are missing, please contact:
TELESTAR Service Center
Am Weiher 14
56766 Ulmen
Email: [email protected]

WEARING HEADPHONES
Place the headband over the outer ear so that the speakers rest on the cheekbone. Do not place the speakers inside the  ear cup.

DEVICE OVERVIEW

1. Volume
2. LED display
3. USB charging port
4. Microphone
5. Multifunction button

FUNCTION OVERVIEW

• Short press >  Increases the volume gradually.
• Long press > Skips to the next track.
• Short press > Decreases the volume gradually.
• Long press > Selects the  next track.

Multifunction button
Hold down > Power on/off.
Short press > Pauses or starts music playback, ends a call in phone mode.*

• If a call comes in during an ongoing phone conversation, you can press the multifunction button twice to end the current call and answer the incoming call.

Press the multifunction
button twice quickly > Switches between Bluetooth playback and playback of saved MP3 files.

BLUETOOTH FUNCTION

To pair the headphones with a mobile device, please follow the steps below:
Turn on the headphones by pressing and holding the multifunction button for 2 seconds. You will hear 2 beep sounds from the headphones. The LED indicator will flash alternately in red and blue. Open the Bluetooth settings on your mobile device and initiate a Bluetooth device search. Select the device named „bluTC active 2“. Once a connection to the headphones is established, you will hear a confirmation tone.

AUTOMATIC BLUETOOTH CONNECTION
When you turn on the headphones again, they will automatically attempt to connect to the last paired mobile device. However, if the mobile device is out of range or the device connection is disabled on the mobile device, the headphones will automatically power off after 10 minutes.

MP3 PLAYER FUNCTION
The headphones are equipped with a 32 GB internal memory, onto which MP3 music files can be loaded and played. Connect the headphones to a computer or laptop using the provided USB cable and transfer the music files to the headphones.

You can switch to the MP3 playback mode using the multi-function button. (see Chapter 6)

CHARGE THE HEADPHONES
Connect the headphones to the USB-C port (3) using the provided USB-C charging cable, either to a compatible USB power adapter or the USB port of a computer.
The LED indicator (2) will display the charging status of the battery.

CAUTION
Use only appropriate USB charging sources. The device should only be charged with charging sources that provide a charging voltage of 5V. Do not use fast chargers that deliver more than 1.5A charging current. Do not use the headphones while they are being charged.

LED DISPLAY

TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

• Model: IMPERIAL bluTC active 2
• BT Version V5.3
• Input Voltage: 5V
• Battery Capacity: 180mA
• BT Frequency Range: 2.402 – 2.480 GHz
• Audio Frequency: 20Hz – 20KHz
• Impedance – Speaker : 8 Ohm
• Transmission
• Distance Max : 10m
• Sensitivity: 86dB (+/- 3dB)
• Battery Charging Time: approximately 2 hours

DISPOSAL

Disposal of packaging
The packaging of your device consists solely of recyclable materials. Please sort and dispose of them accordingly through the „Dual System“ recycling program.

Disposal of the device

• The symbol of a crossed-out wheeled bin, as shown on the right, indicates that this device is subject to Directive 2012/19/EU. This directive states that at the end of its life cycle, this device should not be disposed of with regular household waste, but should be taken to designated collection points, recycling centers, or disposal facilities. This disposal process is free of charge for you. Please help protect the environment and dispose of it properly. For more information, please contact your local waste management or municipal authorities.

Battery disposal
The device contains a rechargeable battery. Batteries and accumulators must not be disposed of in household waste. The symbol depicted on the right indicates that, as a consumer, you are obligated to separately dispose of all batteries and accumulators. Collection containers for this purpose are available at specialist retailers and numerous public facilities. You can also obtain information on the disposal  of old batteries and accumulators from specialized disposal companies, as well as from city and municipal administrations. This disposal is free of charge for you. Help protect the environment and dispose of them properly. An additional chemical symbol of Pb (lead) or Hg (mercury) beneath the crossed-out trash bin indicates that the battery/accumulator contains more than 0.0005% mercury or 0.004% lead.

CE MARKING
Your device bears the CE mark and complies with all necessary EU standards. TELESTAR DIGITAL GmbH hereby declares that the IMPERIAL bluTC active 2 device is in conformity with the essential requirements and other relevant provisions of the RoHS Directive 2011/65/EU, the RE Directive 2014/53/EU, and the ErP Directive 2009/125/EC. You can obtain the Declaration of Conformity for this product at the following link: IMPERIAL bluTC active 2 http://www.telestar.de/de_DE/Konformitaetserklaerung/352-529/?productID=24808

Contact Information
If the hotline cannot assist you, please send the device, preferably in its original packaging, but securely packed, to the following address:

TELESTAR – DIGITAL GmbH

• Service Center
• Am Weiher 14 (Industriegebiet)
• 56766 Ulmen

FAQ (Frequently Asked Questions)

1. What should I do if the device is damaged or defective?
   If the device is damaged or defective, do not use it. Contact the manufacturer’s hotline for assistance or send the device to the provided service center address for repair or replacement.

2. Can I use accessories or parts that are not provided by the manufacturer?
   No, it is recommended to only use replacement and accessory parts that are provided or approved by the manufacturer to ensure proper functionality and safety.

3. Can children play with the packaging materials?
   No, children should not play with the packaging materials as there is a risk of suffocation, especially with packaging films.

4. Is there a risk of hearing damage when using the headphones?
   Yes, excessive sound pressure when using headphones can lead to hearing damage. It is important to check the volume and avoid prolonged exposure at high volumes.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>