MELODYSUSIE P-Art05M Mini 2 In 1 Nail Dryer Instruction Manual

MELODYSUSIE P-Art05M Mini 2 In 1 Nail Dryer

Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING.

To reduce the risk of burns, electrocution, fire or injury to persons.
Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Check before Using

1. Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
3. Use the original charger only.

Note for Battery

1. The battery needs to be charged fully before the first use to ensure optimal performance.
2. Do not over charge the device or use it when charging.
3. Charge the device in a well-ventilated condition with 0°C-40°C. Do not charge the device close to flammable or explosive materials.
4. Do not cover any thing on it when charging.
5. Charge the device once every three months to keep it in normal conditions, the battery performance will decline over several years.

Note for Using

1. To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand. Turn the power off after use.
2. Misuse, dropping or excessive force may cause device damage.
3. Minor should not use this device without parental consent and supervision.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not store the device in a hot or humid environment. Store it in a cool and dry place.
3. Keep the electrical cord away from heated surfaces.
4. Do not dispose of the device in heat or fire.
5. Do not clean the device with harmful chemicals or detergents.

Note for Injury

1. Do not use the device if you have an open wound on your nail or hand.
2. If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professional before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, please contact us.
SAVE THE INSTRUCTION MANUAL

HowtoUse

• Step 1: Lift the lamp shade above the finger placement area.
• Step 2: Press the “”ON/OFF”” button to power on the device.
• Step 3: Touch the to switch the light between the LED Light Mode and UV Light Mode.
• Step 4: The UV Light Mode will switch into the LED Light Mode after60 seconds curing automatically. If you need to use the UV Light Mode again, simply press the to switch the light.
• Step 5: Press the “ON/OFF” button to power off the device or lay down the lamp shade to auto turn off the light.

Mini Nail Art Lamp

1. LampShade
2. Touch Switch
3. LED Light/UV Light
4. Finger Placement Area
5. Charging Indicator
6. Type-CChargeJack
7. ON/OFF

NOTE:

• LED Light Mode: Without curing function, can only provide the lighting requirement for manicure work.
• UV Light Mode: Work for nail gel polish curing (When used in conjunction with MelodySusie Nail Lamp whose power is higher than 48W).
• Avoid eye contact directly with the light, which may caus e eye injury.

Charging

1. Connect the charging cord to the lamp.
2. Insert the charging cord with the 5V 2A adapter or other USB sockets.
3. Indicator will change from RED to GREEN when the device is fully charged.

Problems and Terms of Settlement

doesn’t work.
2. Nail Lamp damages.| Avoid device drops or by other impacts.
Longtime, large load work.| Burns out, or device lifespan shortens.| The continuous working time should not be too long when the working condition is in heavy load. When the device is overheating, it should be stopped immediately to make it return to normal temperature.
Malfunction| Reasons| Solutions
---|---|---

The beads do not turn on.

| The LED light beads are defective, or the lamp’s internal circuits are damaged.| When the light beads are damaged, please contact MelodySusie’s customer service team for help.
The gel nail polish cannot be cured or dried.| Insufficient curing time may result in incomplete curing your gel nail polish. The curing time requirements vary for different gel polish brands and colors.| 1. Please try to extend the curing time appropriately until the nail surface is completely cured.
2.  Please make sure the nail lamp is close enough to your nails, and avoid moving your hand too much until curing is complete.
3.  Please adjust the nail light angle to make sure the light can reach your nails directly.
4. When used in conjunction with MelodySusie NailLamp (Power higher than 48W).
Overcharged.| Battery lifespan shortens.| Not exceed the specified charging time.
Insert into a mismatched power supply.| Burns out.| According to the device voltage requirements, insert the matching power supply.
Put the power cord at random, or use the device when charging.| 1. Battery damages and device lifespan shortens.
2. Power cord broke.
3. Poor connection.| Donot pull the power cord, or do not use the device when charging.
Water into the device, or operate in wet or moist conditions,or use a wet cloth to clean the device.| 1. Motor burns out.
2.Device lifespan shortens.| Donot operate in wet or moist conditions, only adry cloth is allowed for cleaning.

Specifications

• Max Input Voltage Range: 5V/2A
• Battery Fully Charing Time: 2 hours
• E-mail: service@melodysusie.com
• E-mail: service.uk@melodysusie.com
• Website: www.melodysusie.com

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.

Thank you for purchasing from MelodySusie.
You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

www.melodysusie.com
US Service: service@melodysusie.com
UK Service: service.uk@melodysusie.com
FR Service: service.fr@melodysusie.com
DE Service: service.de@melodysusie.com
Whipple Rd, Union City, CA 94578

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEMIS AR support Itd.
85 Great Portland St. London, United Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>