estelle ESHRDYRHSIA High Speed Pro Hair Dryer User Guide
- June 15, 2024
- ESTELLE
Table of Contents
USER GUIDE
HIGH SPEED PRO HAIR DRYER
ESHRDYRHSIA
SAFETY & WARNINGS
WARNING: To avoid accidental injuries such as electric shock and fire caused by improper use, be sure to observe the following safety precautions!
Read all instructions in this guide before using this product. Retain this guide for future reference. Do not skip, substitute or modify any steps or procedures in this guide, as doing so could result in personal injury or product damage.
-
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is recommended in the electrical circuit supplying the bathroom. If unsure if your electrical outlet is suitable, consult a licenced electrician.
-
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product in a safe way by the person responsible for their safety, and understand the hazards involved.
-
Children should be supervised to ensure that they do not play with the appliance.
-
If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.
-
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
Do not use this device in a bathtub, shower, or water-filled reservoir -
When using this appliance in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
-
Do not block the air inlet or place the air inlet facing down during operation. Doing so may cause the heating wire to overheat and ignite.
-
Do not immerse the hair dryer in water or any other liquids.
-
Do not use the hair dryer in a humid environments.
-
To avoid potential damage and electric shock, do not expose the hair dryer to water or operate it with wet hands.
-
To prevent the risk of fire or explosion from a short circuit, avoid using the hair dryer near any flammable substances such as petrol, paint, thinners, spray, etc.
-
Avoid wrapping the power cord around the main body of the product, as this can lead to the power cord breaking, and increase the risk of electric shock or fire due to a short circuit.
-
Avoid storing the product in a highly humid environment to prevent the risk of electric shock or fire due to a short circuit.
-
Keep the product out of the reach of children and infants.
-
Do not attempt to repair, disassemble, or modify the product on your own, as this can lead to injury due to improper operation or fire hazards.
-
For added protection, it is recommended to install a residual current device (RCD) with a rated residual working current not exceeding 30mA in the bathroom power supply electrical circuit.
-
During use, the air outlet and nozzle may become hot, do not touch it with your hands or it may cause burns.
-
This product is not suitable for infants or young children.
-
Always unplug the hair dryer from the outlet after using it.
-
Do not unplug by hair dryer by pulling on the power cord, instead grasp the plug.
-
Avoid forcefully pulling the power cord to prevent it from breaking, causing electric shock or fire due to short circuit.
-
Use the hair dryer solely for its intended purpose of drying hair. Do not use it to dry shoes or articles of clothing.
-
Ensure to use the hair dryer only with an electrical outlet that is compatible with its power rating of 220-240V~.
-
Do not use universal plugs or voltage converters to avoid potential dangers.
-
When storing the hair dryer, avoid wrapping the power cord around the main body of the product to prevent damaging the power cord, which can cause electric shock or fire due to a short circuit.
-
If this product or its power cord shows any signs of damage cease use immediately and contact help.Kogan.com for support.
OVERVIEW
-
Air outlet
-
Indicator
a. Hot air
b. Warm air
c. Cold air -
Temperature control button
-
Airflow control button
-
Cold shot button
-
Power switch
-
Air inlet
OPERATION
Turning the Hair Dryer On/Off
- Slide the power switch up to turn the hair dryer ON.
- Slide the power switch down to turn the hair dryer OFF.
- This hair dryer has an Auto Shut Off feature and will automatically turn off after 10 minutes of continuous operation.
Attaching/Removing the Nozzle
- This product is equipped with a magnetic nozzle for easy attachment and removal.
- The nozzle can be rotated 360°.
- Ensure the hair dryer is off when attaching or removing the nozzle.
Note: To avoid burns, do not adjust or remove the nozzle during operation. Allow the nozzle to cool down before handling.
Airflow Control
- The first time using the hair dryer, the airflow is set to level 1.
- Each time the Airflow Control Button is pressed, the hair dryer cycles through the three airflow levels (1 → 2 → 3 → 1).
- Upon restarting, the hair dryer will automatically resume its airflow level from the previous use.
- The indicator brightness will change depending on the airflow level.
o Level 1 - Dark
o Level 2 - Dimmed
o Level 3 - Bright
Temperature Control
- Each time the Temperature Control Button is pressed, the hair dryer cycles through the three temperature levels (COLD → WARM → HOT → COLD).
- Upon restarting, the hair dryer will automatically resume its temperature level from the previous use.
- The indicator colour will change depending on the temperature level.
o COLD - Blue
o WARM - Purple
o HOT - Red
Reverse Auto-cleaning
This hair dryer features a reverse auto-cleaning function. The motor spins in reverse to clean the internal components.
- To enable the auto-cleaning function, use the temperature control button to set the temperate to cool (indicator is blue).
- Press and hold the airflow control button for 3 seconds. The airflow will stop and the indicator will begin flashing.
- Press and hold the cold shot button for 3 seconds.
- The hair dryer will start reverse auto-cleaning for 5 seconds.
- To reactivate auto-cleaning, press and hold the shot button for 3 seconds.
- Press the airflow control button to return to normal function.
Cold Shot
The Cool Shot feature of the hair dryer releases a stream of cool air. It is recommended to use this function at the end of your drying session to set your hairstyle and achieve a shiny finish.
- Press and hold the cold shot button to instantly switch to cold air.
- Release the button to resume at the previously set temperature.
CLEANING & CARE
- Before cleaning, ensure that the power switch is turned off and hair dryer has been unplugged from the electrical outlet.
- Do not use any corrosive liquids such as alcohol, nail polish remover or detergent to clean this product. Doing so may damage this product or cause malfunction.
Cleaning the Filter
- Remove the filter cover by pulling it downwards.
- Use a dry lint-free cloth, cotton swab or soft brush to remove any dust, hair or debris from the filter cover and the stainless-steel mesh filter.
- Do not press or rub the stainless-steel air inlet filter with fingernails or sharp objects.
- After cleaning, install the filter cover back to its original position.
- Clean the filter at least once a month.
- Do not operate the hair dryer with the filter cover removed.
- Mesh filter
- Filter cover
SPECIFICATIONS
Rated power 1500W
Rated voltage 220-240V~
Rated frequency 50/60Hz
Dimensions 255 x 98.5 x 76.5mm
NOTES
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com
Documents / Resources
|
estelle ESHRDYRHSIA High Speed Pro Hair
Dryer
[pdf] User Guide
ESHRDYRHSIA High Speed Pro Hair Dryer, ESHRDYRHSIA, High Speed Pro Hair Dryer,
Speed Pro Hair Dryer, Pro Hair Dryer, Hair Dryer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>