GIGABYTE UD750GM Power Supply User Manual
- June 15, 2024
- Gigabyte
Table of Contents
GIGABYTE UD750GM Power Supply
Product Information
Specifications
- CPU: 4+4 pin
- Molex: 3 pin
- SATA: 4 pin
- PCI-E (6 + 2pin): 4
Product Usage Instructions
Installing the CPU
To install the CPU, follow these steps:
- Ensure that the power supply is disconnected and the computer is turned off.
- Locate the CPU socket on your motherboard.
- Align the notches on the CPU with the notches on the socket.
- Gently place the CPU into the socket without applying any force.
- Close the CPU socket lever to secure the CPU in place.
Connecting Power Cables
To connect power cables, follow these steps:
- Locate the CPU power connector on your motherboard (8-pin).
- Connect the CPU power cable (4+4 pin) to the CPU power connector.
- Locate the Molex power connectors (3-pin) on your motherboard.
- Connect the Molex power cables to the Molex power connectors.
- Locate the SATA power connectors (4-pin) on your motherboard.
- Connect the SATA power cables to the SATA power connectors.
- Locate the PCI-E power connectors (6 + 2pin) on your motherboard.
- Connect the PCI-E power cables to the PCI-E power connectors.
Frequently Asked Questions (FAQ)
Q: What is the CPU power connector?
A: The CPU power connector is an 8-pin connector on your motherboard that
provides power to the CPU.
Q: How many Molex power connectors are there?
A: There are 3 Molex power connectors on your motherboard.
Q: How many SATA power connectors are there?
A: There are 4 SATA power connectors on your motherboard.
Q: How many PCI-E power connectors are there?
A: There are 4 PCI-E power connectors (6 + 2pin) on your motherboard.
Power supply manual
Installation
- Unscrew and open the side panel of the chassis
- Install the power supply as below
- Connect Motherboard (20+4 Pin) and CPU (4+4 Pin) connectors to your motherboard
- Connect other connectors, like PCI-E (6+2pin), SATA and Molex from power supply to your system components and make sure that all of them are well connected
- Close the chassis and reattach the case screws
- Plug in the power cord of the power supply and switch on the power
Cautions and Warnings
- Please unplug or switch off the power supply when installing it
- Please make sure that the power source is consistent and stable before switching on the power supply
- Do not plug or unplug the power cord when the power supply is on. It will cause serious damage to your components
- Do not use the power supply in a high humidity or high temperature environment
- High voltage exists in the power supply and only and authorized service technician can open the power supply
- All warranties and guarantees will be voided in the event of failure to comply with any of the warnings and cautions covered in this manual.
- If the power supply is not working properly, please contact our Product Service Center.
Troubleshooting
If your computer does not work normally after installing the power supply, please follow the troubleshooting guide as listed below:
- Please make sure the AC power is connected correctly
- Please make sure the Motherboard 20+4pin and CPU 8 pin connectors are connected correctly to the motherboard
- If the power supply still does not work normally, please contact our service center immediately
Warranty
Gigabyte provides hardware limited warranty for the power supply on the date
of purchase and guarantees this device to be free of defects in material and
workmanship. Please keep your receipt with safety.
This product is designed only for computer and using this device in any other
purposes will void the warranty. If you are not familiar with power supply
installation, please ask for professional technical assistance.
The warranty is applied to damages caused through normal usage and it will be
void if the device was damaged because of abuse, alteration, misuse,
negligence, incorrect voltage supply, air/water pollution, accidents and
natural disasters.
Note
- Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
- “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
- The “-” indicates that the restricted substance corresponds to the exemption.
Asia (Headquarters)
GIGA-BYTE TECHNOLOGY CO., LTD. Taiwan
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
Tel: +886-2-8912-4000
http://www.gigabyte.com
China
GIGABYTE CHINA
Address: 24/F, HaiTong Securities Tower, No.689 Guangdong Road, Shanghai,China
Tel: +86-21-6340-0912
Europe
G.B.T. Technology Trading GmbH
Address: Am Stadtrand 63, 22047 Hamburg, Germany
Tel: +49-40-25 33 040
North America
G.B.T. INC. USA
Address: 17358 Railroad Street, City of Industry, CA91748 USA
Tel: +1-626-854-9338